drm/radeon/kms: upstream atombios.h updates

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

1 files changed, 792 insertions, 61 deletions

diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index fe359a239df3..6a9baa2443f8 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -73,8 +73,18 @@
 #define ATOM_PPLL1            0
 #define ATOM_PPLL2            1
 #define ATOM_DCPLL            2
+#define ATOM_PPLL0            2
+#define ATOM_EXT_PLL1         8
+#define ATOM_EXT_PLL2         9
+#define ATOM_EXT_CLOCK        10
 #define ATOM_PPLL_INVALID     0xFF
 
+#define ENCODER_REFCLK_SRC_P1PLL       0       
+#define ENCODER_REFCLK_SRC_P2PLL       1
+#define ENCODER_REFCLK_SRC_DCPLL       2
+#define ENCODER_REFCLK_SRC_EXTCLK      3
+#define ENCODER_REFCLK_SRC_INVALID     0xFF
+
 #define ATOM_SCALER1          0
 #define ATOM_SCALER2          1
 
@@ -192,6 +202,9 @@ typedef struct _ATOM_COMMON_TABLE_HEADER
                                   /*Image can't be updated, while Driver needs to carry the new table! */
 }ATOM_COMMON_TABLE_HEADER;
 
+/****************************************************************************/	
+// Structure stores the ROM header.
+/****************************************************************************/	
 typedef struct _ATOM_ROM_HEADER
 {
   ATOM_COMMON_TABLE_HEADER		sHeader;
@@ -221,6 +234,9 @@ typedef struct _ATOM_ROM_HEADER
 	#define	USHORT	void*
 #endif
 
+/****************************************************************************/	
+// Structures used in Command.mtb 
+/****************************************************************************/	
 typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
   USHORT ASIC_Init;                              //Function Table, used by various SW components,latest version 1.1
   USHORT GetDisplaySurfaceSize;                  //Atomic Table,  Used by Bios when enabling HW ICON
@@ -312,6 +328,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{
 #define SetUniphyInstance                        ASIC_StaticPwrMgtStatusChange
 #define HPDInterruptService                      ReadHWAssistedI2CStatus
 #define EnableVGA_Access                         GetSCLKOverMCLKRatio
+#define GetDispObjectInfo                        EnableYUV 
 
 typedef struct _ATOM_MASTER_COMMAND_TABLE
 {
@@ -357,6 +374,24 @@ typedef struct _ATOM_COMMON_ROM_COMMAND_TABLE_HEADER
 /****************************************************************************/	
 #define COMPUTE_MEMORY_PLL_PARAM        1
 #define COMPUTE_ENGINE_PLL_PARAM        2
+#define ADJUST_MC_SETTING_PARAM         3
+
+/****************************************************************************/	
+// Structures used by AdjustMemoryControllerTable
+/****************************************************************************/	
+typedef struct _ATOM_ADJUST_MEMORY_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+  ULONG ulPointerReturnFlag:1;      // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block 
+  ULONG ulMemoryModuleNumber:7;     // BYTE_3[6:0]
+  ULONG ulClockFreq:24;
+#else
+  ULONG ulClockFreq:24;
+  ULONG ulMemoryModuleNumber:7;     // BYTE_3[6:0]
+  ULONG ulPointerReturnFlag:1;      // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_3[7]=0 - Program the right Data Block 
+#endif
+}ATOM_ADJUST_MEMORY_CLOCK_FREQ;
+#define POINTER_RETURN_FLAG             0x80
 
 typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS
 {
@@ -440,6 +475,26 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4
 #endif
 }COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V4;
 
+typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5
+{
+  union
+  {
+    ATOM_COMPUTE_CLOCK_FREQ  ulClock;         //Input Parameter
+    ATOM_S_MPLL_FB_DIVIDER   ulFbDiv;         //Output Parameter
+  };
+  UCHAR   ucRefDiv;                           //Output Parameter      
+  UCHAR   ucPostDiv;                          //Output Parameter      
+  union
+  {
+    UCHAR   ucCntlFlag;                       //Output Flags
+    UCHAR   ucInputFlag;                      //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0) mode
+  };
+  UCHAR   ucReserved;                       
+}COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5;
+
+// ucInputFlag
+#define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN  1   // 1-StrobeMode, 0-PerformanceMode
+
 typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER
 {
   ATOM_COMPUTE_CLOCK_FREQ ulClock;
@@ -583,6 +638,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
 #define ATOM_ENCODER_CONFIG_DPLINKRATE_MASK				0x01
 #define ATOM_ENCODER_CONFIG_DPLINKRATE_1_62GHZ		0x00
 #define ATOM_ENCODER_CONFIG_DPLINKRATE_2_70GHZ		0x01
+#define ATOM_ENCODER_CONFIG_DPLINKRATE_5_40GHZ		0x02
 #define ATOM_ENCODER_CONFIG_LINK_SEL_MASK				  0x04
 #define ATOM_ENCODER_CONFIG_LINKA								  0x00
 #define ATOM_ENCODER_CONFIG_LINKB								  0x04
@@ -608,6 +664,9 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS
 #define ATOM_ENCODER_MODE_TV											13
 #define ATOM_ENCODER_MODE_CV											14
 #define ATOM_ENCODER_MODE_CRT											15
+#define ATOM_ENCODER_MODE_DVO											16
+#define ATOM_ENCODER_MODE_DP_SST                  ATOM_ENCODER_MODE_DP    // For DP1.2
+#define ATOM_ENCODER_MODE_DP_MST                  5                       // For DP1.2
 
 typedef struct _ATOM_DIG_ENCODER_CONFIG_V2
 {
@@ -661,6 +720,7 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_START       0x08
 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN1    0x09
 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN2    0x0a
+#define ATOM_ENCODER_CMD_DP_LINK_TRAINING_PATTERN3    0x13
 #define ATOM_ENCODER_CMD_DP_LINK_TRAINING_COMPLETE    0x0b
 #define ATOM_ENCODER_CMD_DP_VIDEO_OFF                 0x0c
 #define ATOM_ENCODER_CMD_DP_VIDEO_ON                  0x0d
@@ -671,24 +731,34 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V2
 #define ATOM_ENCODER_STATUS_LINK_TRAINING_COMPLETE    0x10
 #define ATOM_ENCODER_STATUS_LINK_TRAINING_INCOMPLETE  0x00
 
+//ucTableFormatRevision=1
+//ucTableContentRevision=3
 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
 typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
 {
 #if ATOM_BIG_ENDIAN
     UCHAR ucReserved1:1;
-    UCHAR ucDigSel:3;             // =0: DIGA/B/C/D/E/F
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
     UCHAR ucReserved:3;
     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
 #else
     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
     UCHAR ucReserved:3;
-    UCHAR ucDigSel:3;             // =0: DIGA/B/C/D/E/F
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
     UCHAR ucReserved1:1;
 #endif
 }ATOM_DIG_ENCODER_CONFIG_V3;
 
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_MASK				0x03
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ		  0x00
+#define ATOM_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ		  0x01
 #define ATOM_ENCODER_CONFIG_V3_ENCODER_SEL					  0x70
-
+#define ATOM_ENCODER_CONFIG_V3_DIG0_ENCODER					  0x00
+#define ATOM_ENCODER_CONFIG_V3_DIG1_ENCODER					  0x10
+#define ATOM_ENCODER_CONFIG_V3_DIG2_ENCODER					  0x20
+#define ATOM_ENCODER_CONFIG_V3_DIG3_ENCODER					  0x30
+#define ATOM_ENCODER_CONFIG_V3_DIG4_ENCODER					  0x40
+#define ATOM_ENCODER_CONFIG_V3_DIG5_ENCODER					  0x50
 
 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
 {
@@ -707,6 +777,56 @@ typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V3
   UCHAR ucReserved;
 }DIG_ENCODER_CONTROL_PARAMETERS_V3;
 
+//ucTableFormatRevision=1
+//ucTableContentRevision=4
+// start from NI           
+// Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disable function will be used by driver
+typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
+{
+#if ATOM_BIG_ENDIAN
+    UCHAR ucReserved1:1;
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucReserved:2;
+    UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
+#else
+    UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
+    UCHAR ucReserved:2;
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucReserved1:1;
+#endif
+}ATOM_DIG_ENCODER_CONFIG_V4;
+
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_MASK				0x03
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ		  0x00
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ		  0x01
+#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ		  0x02
+#define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL					  0x70
+#define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER					  0x00
+#define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER					  0x10
+#define ATOM_ENCODER_CONFIG_V4_DIG2_ENCODER					  0x20
+#define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER					  0x30
+#define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER					  0x40
+#define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER					  0x50
+
+typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4
+{
+  USHORT usPixelClock;      // in 10KHz; for bios convenient
+  union{
+  ATOM_DIG_ENCODER_CONFIG_V4 acConfig;
+  UCHAR ucConfig;
+  };
+  UCHAR ucAction;                              
+  UCHAR ucEncoderMode;
+                            // =0: DP   encoder      
+                            // =1: LVDS encoder          
+                            // =2: DVI  encoder  
+                            // =3: HDMI encoder
+                            // =4: SDVO encoder
+                            // =5: DP audio
+  UCHAR ucLaneNum;          // how many lanes to enable
+  UCHAR ucBitPerColor;      // only valid for DP mode when ucAction = ATOM_ENCODER_CMD_SETUP
+  UCHAR ucHPD_ID;           // HPD ID (1-6). =0 means to skip HDP programming. New comparing to previous version
+}DIG_ENCODER_CONTROL_PARAMETERS_V4;
 
 // define ucBitPerColor: 
 #define PANEL_BPC_UNDEFINE                               0x00
@@ -893,6 +1013,7 @@ typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V3
 #endif
 }ATOM_DIG_TRANSMITTER_CONFIG_V3;
 
+
 typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
 {
 	union
@@ -936,6 +1057,149 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V3
 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER2           	0x40	//CD
 #define ATOM_TRANSMITTER_CONFIG_V3_TRANSMITTER3           	0x80	//EF
 
+
+/****************************************************************************/	
+// Structures used by UNIPHYTransmitterControlTable V1.4
+// ASIC Families: NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=4
+/****************************************************************************/	
+typedef struct _ATOM_DP_VS_MODE_V4
+{
+  UCHAR ucLaneSel;
+ 	union
+ 	{  
+ 	  UCHAR ucLaneSet;
+ 	  struct {
+#if ATOM_BIG_ENDIAN
+ 		  UCHAR ucPOST_CURSOR2:2;         //Bit[7:6] Post Cursor2 Level      <= New in V4
+ 		  UCHAR ucPRE_EMPHASIS:3;         //Bit[5:3] Pre-emphasis Level
+ 		  UCHAR ucVOLTAGE_SWING:3;        //Bit[2:0] Voltage Swing Level
+#else
+ 		  UCHAR ucVOLTAGE_SWING:3;        //Bit[2:0] Voltage Swing Level
+ 		  UCHAR ucPRE_EMPHASIS:3;         //Bit[5:3] Pre-emphasis Level
+ 		  UCHAR ucPOST_CURSOR2:2;         //Bit[7:6] Post Cursor2 Level      <= New in V4
+#endif
+ 		};
+ 	}; 
+}ATOM_DP_VS_MODE_V4;
+ 
+typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V4
+{
+#if ATOM_BIG_ENDIAN
+  UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+                                    //        =1 Dig Transmitter 2 ( Uniphy CD )
+                                    //        =2 Dig Transmitter 3 ( Uniphy EF )
+  UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3   <= New
+  UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+  UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+                                    //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+  UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+  UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
+#else
+  UCHAR fDualLinkConnector:1;       //bit0=1: Dual Link DVI connector
+  UCHAR fCoherentMode:1;            //bit1=1: Coherent Mode ( for DVI/HDMI mode )
+  UCHAR ucLinkSel:1;                //bit2=0: Uniphy LINKA or C or E when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is A or C or E
+                                    //    =1: Uniphy LINKB or D or F when fDualLinkConnector=0. when fDualLinkConnector=1, it means master link of dual link is B or D or F
+  UCHAR ucEncoderSel:1;             //bit3=0: Data/Clk path source from DIGA/C/E. =1: Data/clk path source from DIGB/D/F
+  UCHAR ucRefClkSource:2;           //bit5:4: PPLL1 =0, PPLL2=1, DCPLL=2, EXT_CLK=3   <= New
+  UCHAR ucTransmitterSel:2;         //bit7:6: =0 Dig Transmitter 1 ( Uniphy AB )
+                                    //        =1 Dig Transmitter 2 ( Uniphy CD )
+                                    //        =2 Dig Transmitter 3 ( Uniphy EF )
+#endif
+}ATOM_DIG_TRANSMITTER_CONFIG_V4;
+
+typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4
+{
+  union
+  {
+    USHORT usPixelClock;		// in 10KHz; for bios convenient
+    USHORT usInitInfo;			// when init uniphy,lower 8bit is used for connector type defined in objectid.h
+    ATOM_DP_VS_MODE_V4 asMode; // DP Voltage swing mode     Redefined comparing to previous version
+  };
+  union
+  {
+  ATOM_DIG_TRANSMITTER_CONFIG_V4 acConfig;
+  UCHAR ucConfig;
+  };
+  UCHAR ucAction;				    // define as ATOM_TRANSMITER_ACTION_XXX	                        
+  UCHAR ucLaneNum;
+  UCHAR ucReserved[3];
+}DIG_TRANSMITTER_CONTROL_PARAMETERS_V4;
+
+//ucConfig 
+//Bit0
+#define ATOM_TRANSMITTER_CONFIG_V4_DUAL_LINK_CONNECTOR			0x01
+//Bit1
+#define ATOM_TRANSMITTER_CONFIG_V4_COHERENT				          0x02
+//Bit2
+#define ATOM_TRANSMITTER_CONFIG_V4_LINK_SEL_MASK		        0x04
+#define ATOM_TRANSMITTER_CONFIG_V4_LINKA  			            0x00			
+#define ATOM_TRANSMITTER_CONFIG_V4_LINKB				            0x04
+// Bit3
+#define ATOM_TRANSMITTER_CONFIG_V4_ENCODER_SEL_MASK	        0x08
+#define ATOM_TRANSMITTER_CONFIG_V4_DIG1_ENCODER		          0x00				 
+#define ATOM_TRANSMITTER_CONFIG_V4_DIG2_ENCODER		          0x08				
+// Bit5:4
+#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SEL_MASK 	        0x30
+#define ATOM_TRANSMITTER_CONFIG_V4_P1PLL         		        0x00
+#define ATOM_TRANSMITTER_CONFIG_V4_P2PLL		                0x10
+#define ATOM_TRANSMITTER_CONFIG_V4_DCPLL		                0x20   // New in _V4
+#define ATOM_TRANSMITTER_CONFIG_V4_REFCLK_SRC_EXT           0x30   // Changed comparing to V3
+// Bit7:6
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER_SEL_MASK     0xC0
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER1           	0x00	//AB
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER2           	0x40	//CD
+#define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3           	0x80	//EF
+
+
+/****************************************************************************/	
+// Structures used by ExternalEncoderControlTable V1.3
+// ASIC Families: Evergreen, Llano, NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=3
+/****************************************************************************/	
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3
+{
+  union{
+  USHORT usPixelClock;      // pixel clock in 10Khz, valid when ucAction=SETUP/ENABLE_OUTPUT 
+  USHORT usConnectorId;     // connector id, valid when ucAction = INIT
+  };
+  UCHAR  ucConfig;          // indicate which encoder, and DP link rate when ucAction = SETUP/ENABLE_OUTPUT  
+  UCHAR  ucAction;          // 
+  UCHAR  ucEncoderMode;     // encoder mode, only used when ucAction = SETUP/ENABLE_OUTPUT
+  UCHAR  ucLaneNum;         // lane number, only used when ucAction = SETUP/ENABLE_OUTPUT  
+  UCHAR  ucBitPerColor;     // output bit per color, only valid when ucAction = SETUP/ENABLE_OUTPUT and ucEncodeMode= DP
+  UCHAR  ucReserved;        
+}EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3;
+
+// ucAction
+#define EXTERNAL_ENCODER_ACTION_V3_DISABLE_OUTPUT         0x00
+#define EXTERNAL_ENCODER_ACTION_V3_ENABLE_OUTPUT          0x01
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_INIT           0x07
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_SETUP          0x0f
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING_OFF   0x10
+#define EXTERNAL_ENCODER_ACTION_V3_ENCODER_BLANKING       0x11
+#define EXTERNAL_ENCODER_ACTION_V3_DACLOAD_DETECTION      0x12
+
+// ucConfig
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_MASK				0x03
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_1_62GHZ		  0x00
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_2_70GHZ		  0x01
+#define EXTERNAL_ENCODER_CONFIG_V3_DPLINKRATE_5_40GHZ		  0x02
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER_SEL_MASK		    0x70
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER1		            0x00
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER2		            0x10
+#define EXTERNAL_ENCODER_CONFIG_V3_ENCODER3		            0x20
+
+typedef struct _EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3
+{
+  EXTERNAL_ENCODER_CONTROL_PARAMETERS_V3 sExtEncoder;
+  ULONG ulReserved[2];
+}EXTERNAL_ENCODER_CONTROL_PS_ALLOCATION_V3;
+
+
 /****************************************************************************/	
 // Structures used by DAC1OuputControlTable
 //                    DAC2OuputControlTable
@@ -1142,6 +1406,7 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V2
 #define PIXEL_CLOCK_V4_MISC_SS_ENABLE               0x10
 #define PIXEL_CLOCK_V4_MISC_COHERENT_MODE           0x20
 
+
 typedef struct _PIXEL_CLOCK_PARAMETERS_V3
 {
   USHORT usPixelClock;                // in 10kHz unit; for bios convenient = (RefClk*FB_Div)/(Ref_Div*Post_Div)
@@ -1202,6 +1467,55 @@ typedef struct _PIXEL_CLOCK_PARAMETERS_V5
 #define PIXEL_CLOCK_V5_MISC_HDMI_32BPP              0x08
 #define PIXEL_CLOCK_V5_MISC_REF_DIV_SRC             0x10
 
+typedef struct _CRTC_PIXEL_CLOCK_FREQ
+{
+#if ATOM_BIG_ENDIAN
+  ULONG  ucCRTC:8;            // ATOM_CRTC1~6, indicate the CRTC controller to 
+                              // drive the pixel clock. not used for DCPLL case.
+  ULONG  ulPixelClock:24;     // target the pixel clock to drive the CRTC timing. 
+                              // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
+#else
+  ULONG  ulPixelClock:24;     // target the pixel clock to drive the CRTC timing. 
+                              // 0 means disable PPLL/DCPLL. Expanded to 24 bits comparing to previous version.
+  ULONG  ucCRTC:8;            // ATOM_CRTC1~6, indicate the CRTC controller to 
+                              // drive the pixel clock. not used for DCPLL case.
+#endif
+}CRTC_PIXEL_CLOCK_FREQ;
+
+typedef struct _PIXEL_CLOCK_PARAMETERS_V6
+{
+  union{
+    CRTC_PIXEL_CLOCK_FREQ ulCrtcPclkFreq;    // pixel clock and CRTC id frequency 
+    ULONG ulDispEngClkFreq;                  // dispclk frequency
+  };
+  USHORT usFbDiv;            // feedback divider integer part. 
+  UCHAR  ucPostDiv;          // post divider. 
+  UCHAR  ucRefDiv;           // Reference divider
+  UCHAR  ucPpll;             // ATOM_PPLL1/ATOM_PPLL2/ATOM_DCPLL
+  UCHAR  ucTransmitterID;    // ASIC encoder id defined in objectId.h, 
+                             // indicate which graphic encoder will be used. 
+  UCHAR  ucEncoderMode;      // Encoder mode: 
+  UCHAR  ucMiscInfo;         // bit[0]= Force program PPLL 
+                             // bit[1]= when VGA timing is used. 
+                             // bit[3:2]= HDMI panel bit depth: =0: 24bpp =1:30bpp, =2:32bpp
+                             // bit[4]= RefClock source for PPLL. 
+                             // =0: XTLAIN( default mode )
+	                           // =1: other external clock source, which is pre-defined                                            
+                             //     by VBIOS depend on the feature required.
+                             // bit[7:5]: reserved.
+  ULONG  ulFbDivDecFrac;     // 20 bit feedback divider decimal fraction part, range from 1~999999 ( 0.000001 to 0.999999 )
+
+}PIXEL_CLOCK_PARAMETERS_V6;
+
+#define PIXEL_CLOCK_V6_MISC_FORCE_PROG_PPLL					0x01
+#define PIXEL_CLOCK_V6_MISC_VGA_MODE								0x02
+#define PIXEL_CLOCK_V6_MISC_HDMI_BPP_MASK           0x0c
+#define PIXEL_CLOCK_V6_MISC_HDMI_24BPP              0x00
+#define PIXEL_CLOCK_V6_MISC_HDMI_36BPP              0x04
+#define PIXEL_CLOCK_V6_MISC_HDMI_30BPP              0x08
+#define PIXEL_CLOCK_V6_MISC_HDMI_48BPP              0x0c
+#define PIXEL_CLOCK_V6_MISC_REF_DIV_SRC             0x10
+
 typedef struct _GET_DISP_PLL_STATUS_INPUT_PARAMETERS_V2
 {
   PIXEL_CLOCK_PARAMETERS_V3 sDispClkInput;
@@ -1241,10 +1555,11 @@ typedef struct _ADJUST_DISPLAY_PLL_PARAMETERS
 typedef struct _ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3
 {
 	USHORT usPixelClock;                    // target pixel clock
-	UCHAR ucTransmitterID;                  // transmitter id defined in objectid.h
+	UCHAR ucTransmitterID;                  // GPU transmitter id defined in objectid.h
 	UCHAR ucEncodeMode;                     // encoder mode: CRT, LVDS, DP, TMDS or HDMI
   UCHAR ucDispPllConfig;                 // display pll configure parameter defined as following DISPPLL_CONFIG_XXXX
-	UCHAR ucReserved[3];
+  UCHAR ucExtTransmitterID;               // external encoder id.
+	UCHAR ucReserved[2];
 }ADJUST_DISPLAY_PLL_INPUT_PARAMETERS_V3;
 
 // usDispPllConfig v1.2 for RoadRunner
@@ -1358,6 +1673,7 @@ typedef struct _SET_UP_HW_I2C_DATA_PARAMETERS
 /**************************************************************************/
 #define SPEED_FAN_CONTROL_PS_ALLOCATION   WRITE_ONE_BYTE_HW_I2C_DATA_PARAMETERS
 
+
 /****************************************************************************/	
 // Structures used by PowerConnectorDetectionTable
 /****************************************************************************/	
@@ -1438,6 +1754,31 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2
 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_MASK     0x0F00
 #define ATOM_PPLL_SS_AMOUNT_V2_NFRAC_SHIFT    8
 
+// Used by DCE5.0
+ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3
+{
+  USHORT  usSpreadSpectrumAmountFrac;   // SS_AMOUNT_DSFRAC New in DCE5.0
+  UCHAR   ucSpreadSpectrumType;	        // Bit[0]: 0-Down Spread,1-Center Spread. 
+                                        // Bit[1]: 1-Ext. 0-Int. 
+                                        // Bit[3:2]: =0 P1PLL =1 P2PLL =2 DCPLL
+                                        // Bits[7:4] reserved
+  UCHAR   ucEnable;	                    // ATOM_ENABLE or ATOM_DISABLE
+  USHORT  usSpreadSpectrumAmount;      	// Includes SS_AMOUNT_FBDIV[7:0] and SS_AMOUNT_NFRAC_SLIP[11:8]    
+  USHORT  usSpreadSpectrumStep;	        // SS_STEP_SIZE_DSFRAC
+}ENABLE_SPREAD_SPECTRUM_ON_PPLL_V3;
+    
+#define ATOM_PPLL_SS_TYPE_V3_DOWN_SPREAD      0x00
+#define ATOM_PPLL_SS_TYPE_V3_CENTRE_SPREAD    0x01
+#define ATOM_PPLL_SS_TYPE_V3_EXT_SPREAD       0x02
+#define ATOM_PPLL_SS_TYPE_V3_PPLL_SEL_MASK    0x0c
+#define ATOM_PPLL_SS_TYPE_V3_P1PLL            0x00
+#define ATOM_PPLL_SS_TYPE_V3_P2PLL            0x04
+#define ATOM_PPLL_SS_TYPE_V3_DCPLL            0x08
+#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK     0x00FF
+#define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT    0
+#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK     0x0F00
+#define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_SHIFT    8
+
 #define ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION  ENABLE_SPREAD_SPECTRUM_ON_PPLL
 
 /**************************************************************************/
@@ -1706,7 +2047,7 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
   USHORT        StandardVESA_Timing;      // Only used by Bios
   USHORT        FirmwareInfo;             // Shared by various SW components,latest version 1.4
   USHORT        DAC_Info;                 // Will be obsolete from R600
-  USHORT        LVDS_Info;                // Shared by various SW components,latest version 1.1 
+  USHORT        LCD_Info;                 // Shared by various SW components,latest version 1.3, was called LVDS_Info 
   USHORT        TMDS_Info;                // Will be obsolete from R600
   USHORT        AnalogTV_Info;            // Shared by various SW components,latest version 1.1 
   USHORT        SupportedDevicesInfo;     // Will be obsolete from R600
@@ -1736,12 +2077,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES
 	USHORT				PowerSourceInfo;					// Shared by various SW components, latest versoin 1.1
 }ATOM_MASTER_LIST_OF_DATA_TABLES;
 
+// For backward compatible 
+#define LVDS_Info                LCD_Info
+
 typedef struct _ATOM_MASTER_DATA_TABLE
 { 
   ATOM_COMMON_TABLE_HEADER sHeader;  
   ATOM_MASTER_LIST_OF_DATA_TABLES   ListOfDataTables;
 }ATOM_MASTER_DATA_TABLE;
 
+
 /****************************************************************************/	
 // Structure used in MultimediaCapabilityInfoTable
 /****************************************************************************/	
@@ -1776,6 +2121,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
   UCHAR                    ucVideoInput4Info;// Video Input 4 Type (1:0) F/B setting (2) physical connector ID (5:3) reserved (7:6)
 }ATOM_MULTIMEDIA_CONFIG_INFO;
 
+
 /****************************************************************************/	
 // Structures used in FirmwareInfoTable
 /****************************************************************************/	
@@ -2031,8 +2377,47 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_1
   UCHAR                           ucReserved4[3];
 }ATOM_FIRMWARE_INFO_V2_1;
 
+//the structure below to be used from NI
+//ucTableFormatRevision=2
+//ucTableContentRevision=2
+typedef struct _ATOM_FIRMWARE_INFO_V2_2
+{
+  ATOM_COMMON_TABLE_HEADER        sHeader; 
+  ULONG                           ulFirmwareRevision;
+  ULONG                           ulDefaultEngineClock;       //In 10Khz unit
+  ULONG                           ulDefaultMemoryClock;       //In 10Khz unit
+  ULONG                           ulReserved[2];
+  ULONG                           ulReserved1;                //Was ulMaxEngineClockPLL_Output; //In 10Khz unit*
+  ULONG                           ulReserved2;                //Was ulMaxMemoryClockPLL_Output; //In 10Khz unit*
+  ULONG                           ulMaxPixelClockPLL_Output;  //In 10Khz unit
+  ULONG                           ulBinaryAlteredInfo;        //Was ulASICMaxEngineClock  ?
+  ULONG                           ulDefaultDispEngineClkFreq; //In 10Khz unit. This is the frequency before DCDTO, corresponding to usBootUpVDDCVoltage.          
+  UCHAR                           ucReserved3;                //Was ucASICMaxTemperature;
+  UCHAR                           ucMinAllowedBL_Level;
+  USHORT                          usBootUpVDDCVoltage;        //In MV unit
+  USHORT                          usLcdMinPixelClockPLL_Output; // In MHz unit
+  USHORT                          usLcdMaxPixelClockPLL_Output; // In MHz unit
+  ULONG                           ulReserved4;                //Was ulAsicMaximumVoltage
+  ULONG                           ulMinPixelClockPLL_Output;  //In 10Khz unit
+  ULONG                           ulReserved5;                //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input
+  ULONG                           ulReserved6;                //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input
+  ULONG                           ulReserved7;                //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output
+  USHORT                          usReserved11;               //Was usMaxPixelClock;  //In 10Khz unit, Max.  Pclk used only for DAC
+  USHORT                          usMinPixelClockPLL_Input;   //In 10Khz unit
+  USHORT                          usMaxPixelClockPLL_Input;   //In 10Khz unit
+  USHORT                          usBootUpVDDCIVoltage;       //In unit of mv; Was usMinPixelClockPLL_Output;
+  ATOM_FIRMWARE_CAPABILITY_ACCESS usFirmwareCapability;
+  USHORT                          usCoreReferenceClock;       //In 10Khz unit	
+  USHORT                          usMemoryReferenceClock;     //In 10Khz unit	
+  USHORT                          usUniphyDPModeExtClkFreq;   //In 10Khz unit, if it is 0, In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
+  UCHAR                           ucMemoryModule_ID;          //Indicate what is the board design
+  UCHAR                           ucReserved9[3];
+  USHORT                          usBootUpMVDDCVoltage;       //In unit of mv; Was usMinPixelClockPLL_Output;
+  USHORT                          usReserved12;
+  ULONG                           ulReserved10[3];            // New added comparing to previous version
+}ATOM_FIRMWARE_INFO_V2_2;
 
-#define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V2_1
+#define ATOM_FIRMWARE_INFO_LAST  ATOM_FIRMWARE_INFO_V2_2
 
 /****************************************************************************/	
 // Structures used in IntegratedSystemInfoTable
@@ -2212,7 +2597,7 @@ ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pi
 ucDockingPinBit:     which bit in this register to read the pin status;
 ucDockingPinPolarity:Polarity of the pin when docked;
 
-ulCPUCapInfo:        [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, other bits reserved for now and must be 0x0
+ulCPUCapInfo:        [7:0]=1:Griffin;[7:0]=2:Greyhound;[7:0]=3:K8, [7:0]=4:Pharaoh, other bits reserved for now and must be 0x0
 
 usNumberOfCyclesInPeriod:Indicate how many cycles when PWM duty is 100%.
 
@@ -2250,6 +2635,14 @@ usMinUpStreamHTLinkWidth:    Asymmetric link width support in the future, to rep
 usMinDownStreamHTLinkWidth:  same as above.
 */
 
+// ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo  - CPU type definition 
+#define    INTEGRATED_SYSTEM_INFO__UNKNOWN_CPU             0
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GRIFFIN        1
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND      2
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__K8             3
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH        4
+
+#define    INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE       INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH    // this deff reflects max defined CPU code
 
 #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE                 0x00000001
 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE             0x00000002
@@ -2778,8 +3171,88 @@ typedef struct _ATOM_LVDS_INFO_V12
 #define PANEL_RANDOM_DITHER   0x80
 #define PANEL_RANDOM_DITHER_MASK   0x80
 
+#define ATOM_LVDS_INFO_LAST  ATOM_LVDS_INFO_V12   // no need to change this 
+
+/****************************************************************************/	
+// Structures used by LCD_InfoTable V1.3    Note: previous version was called ATOM_LVDS_INFO_V12
+// ASIC Families:  NI
+// ucTableFormatRevision=1
+// ucTableContentRevision=3
+/****************************************************************************/	
+typedef struct _ATOM_LCD_INFO_V13
+{
+  ATOM_COMMON_TABLE_HEADER sHeader;  
+  ATOM_DTD_FORMAT     sLCDTiming;
+  USHORT              usExtInfoTableOffset;
+  USHORT              usSupportedRefreshRate;     //Refer to panel info table in ATOMBIOS extension Spec.
+  ULONG               ulReserved0;
+  UCHAR               ucLCD_Misc;                // Reorganized in V13
+                                                 // Bit0: {=0:single, =1:dual},
+                                                 // Bit1: {=0:LDI format for RGB888, =1 FPDI format for RGB888}  // was {=0:666RGB, =1:888RGB},
+                                                 // Bit3:2: {Grey level}
+                                                 // Bit6:4 Color Bit Depth definition (see below definition in EDID V1.4 @BYTE 14h) 
+                                                 // Bit7   Reserved.  was for ATOM_PANEL_MISC_API_ENABLED, still need it?  
+  UCHAR               ucPanelDefaultRefreshRate;
+  UCHAR               ucPanelIdentification;
+  UCHAR               ucSS_Id;
+  USHORT              usLCDVenderID;
+  USHORT              usLCDProductID;
+  UCHAR               ucLCDPanel_SpecialHandlingCap;  // Reorganized in V13 
+                                                 // Bit0: Once DAL sees this CAP is set, it will read EDID from LCD on its own
+                                                 // Bit1: See LCDPANEL_CAP_DRR_SUPPORTED
+                                                 // Bit2: a quick reference whether an embadded panel (LCD1 ) is LVDS (0) or eDP (1)
+                                                 // Bit7-3: Reserved 
+  UCHAR               ucPanelInfoSize;					 //  start from ATOM_DTD_FORMAT to end of panel info, include ExtInfoTable
+  USHORT              usBacklightPWM;            //  Backlight PWM in Hz. New in _V13
+
+  UCHAR               ucPowerSequenceDIGONtoDE_in4Ms;
+  UCHAR               ucPowerSequenceDEtoVARY_BL_in4Ms;
+  UCHAR               ucPowerSequenceDEtoDIGON_in4Ms;
+  UCHAR               ucPowerSequenceVARY_BLtoDE_in4Ms;
+
+  UCHAR               ucOffDelay_in4Ms;
+  UCHAR               ucPowerSequenceVARY_BLtoBLON_in4Ms;
+  UCHAR               ucPowerSequenceBLONtoVARY_BL_in4Ms;
+  UCHAR               ucReserved1;
+
+  ULONG               ulReserved[4];
+}ATOM_LCD_INFO_V13;  
+
+#define ATOM_LCD_INFO_LAST  ATOM_LCD_INFO_V13    
+
+//Definitions for ucLCD_Misc
+#define ATOM_PANEL_MISC_V13_DUAL                   0x00000001
+#define ATOM_PANEL_MISC_V13_FPDI                   0x00000002
+#define ATOM_PANEL_MISC_V13_GREY_LEVEL             0x0000000C
+#define ATOM_PANEL_MISC_V13_GREY_LEVEL_SHIFT       2
+#define ATOM_PANEL_MISC_V13_COLOR_BIT_DEPTH_MASK   0x70
+#define ATOM_PANEL_MISC_V13_6BIT_PER_COLOR         0x10
+#define ATOM_PANEL_MISC_V13_8BIT_PER_COLOR         0x20
+
+//Color Bit Depth definition in EDID V1.4 @BYTE 14h
+//Bit 6  5  4
+                              //      0  0  0  -  Color bit depth is undefined
+                              //      0  0  1  -  6 Bits per Primary Color
+                              //      0  1  0  -  8 Bits per Primary Color
+                              //      0  1  1  - 10 Bits per Primary Color
+                              //      1  0  0  - 12 Bits per Primary Color
+                              //      1  0  1  - 14 Bits per Primary Color
+                              //      1  1  0  - 16 Bits per Primary Color
+                              //      1  1  1  - Reserved
+ 
+//Definitions for ucLCDPanel_SpecialHandlingCap:
+
+//Once DAL sees this CAP is set, it will read EDID from LCD on its own instead of using sLCDTiming in ATOM_LVDS_INFO_V12. 
+//Other entries in ATOM_LVDS_INFO_V12 are still valid/useful to DAL 
+#define	LCDPANEL_CAP_V13_READ_EDID              0x1        // = LCDPANEL_CAP_READ_EDID no change comparing to previous version
 
-#define ATOM_LVDS_INFO_LAST  ATOM_LVDS_INFO_V12
+//If a design supports DRR (dynamic refresh rate) on internal panels (LVDS or EDP), this cap is set in ucLCDPanel_SpecialHandlingCap together
+//with multiple supported refresh rates@usSupportedRefreshRate. This cap should not be set when only slow refresh rate is supported (static
+//refresh rate switch by SW. This is only valid from ATOM_LVDS_INFO_V12
+#define	LCDPANEL_CAP_V13_DRR_SUPPORTED          0x2        // = LCDPANEL_CAP_DRR_SUPPORTED no change comparing to previous version
+
+//Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP.
+#define	LCDPANEL_CAP_V13_eDP                    0x4        // = LCDPANEL_CAP_eDP no change comparing to previous version
 
 typedef struct  _ATOM_PATCH_RECORD_MODE
 {
@@ -2944,9 +3417,9 @@ typedef struct _ATOM_DPCD_INFO
 #define MAX_DTD_MODE_IN_VRAM            6
 #define ATOM_DTD_MODE_SUPPORT_TBL_SIZE  (MAX_DTD_MODE_IN_VRAM*28)    //28= (SIZEOF ATOM_DTD_FORMAT) 
 #define ATOM_STD_MODE_SUPPORT_TBL_SIZE  32*8                         //32 is a predefined number,8= (SIZEOF ATOM_STD_FORMAT)
-#define DFP_ENCODER_TYPE_OFFSET					0x80
-#define DP_ENCODER_LANE_NUM_OFFSET			0x84
-#define DP_ENCODER_LINK_RATE_OFFSET			0x88
+//20 bytes for Encoder Type and DPCD in STD EDID area
+#define DFP_ENCODER_TYPE_OFFSET         (ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)    
+#define ATOM_DP_DPCD_OFFSET             (DFP_ENCODER_TYPE_OFFSET + 4 )        
 
 #define ATOM_HWICON1_SURFACE_ADDR       0
 #define ATOM_HWICON2_SURFACE_ADDR       (ATOM_HWICON1_SURFACE_ADDR + ATOM_HWICON_SURFACE_SIZE)
@@ -2997,14 +3470,16 @@ typedef struct _ATOM_DPCD_INFO
 #define ATOM_DFP5_DTD_MODE_TBL_ADDR     (ATOM_DFP5_EDID_ADDR + ATOM_EDID_RAW_DATASIZE)
 #define ATOM_DFP5_STD_MODE_TBL_ADDR     (ATOM_DFP5_DTD_MODE_TBL_ADDR + ATOM_DTD_MODE_SUPPORT_TBL_SIZE)
 
-#define ATOM_DP_TRAINING_TBL_ADDR				(ATOM_DFP5_STD_MODE_TBL_ADDR+ATOM_STD_MODE_SUPPORT_TBL_SIZE)       
+#define ATOM_DP_TRAINING_TBL_ADDR       (ATOM_DFP5_STD_MODE_TBL_ADDR + ATOM_STD_MODE_SUPPORT_TBL_SIZE)
 
-#define ATOM_STACK_STORAGE_START        (ATOM_DP_TRAINING_TBL_ADDR+256)       
-#define ATOM_STACK_STORAGE_END          ATOM_STACK_STORAGE_START+512        
+#define ATOM_STACK_STORAGE_START        (ATOM_DP_TRAINING_TBL_ADDR + 1024)       
+#define ATOM_STACK_STORAGE_END          ATOM_STACK_STORAGE_START + 512        
 
 //The size below is in Kb!
 #define ATOM_VRAM_RESERVE_SIZE         ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)+4)&0xFFFC)
    
+#define ATOM_VRAM_RESERVE_V2_SIZE      32
+
 #define	ATOM_VRAM_OPERATION_FLAGS_MASK         0xC0000000L
 #define ATOM_VRAM_OPERATION_FLAGS_SHIFT        30
 #define	ATOM_VRAM_BLOCK_NEEDS_NO_RESERVATION   0x1
@@ -3206,6 +3681,15 @@ typedef struct  _ATOM_DISPLAY_OBJECT_PATH
   USHORT    usGraphicObjIds[1];                             //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector.
 }ATOM_DISPLAY_OBJECT_PATH;
 
+typedef struct  _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH
+{
+  USHORT    usDeviceTag;                                   //supported device 
+  USHORT    usSize;                                        //the size of ATOM_DISPLAY_OBJECT_PATH
+  USHORT    usConnObjectId;                                //Connector Object ID 
+  USHORT    usGPUObjectId;                                 //GPU ID 
+  USHORT    usGraphicObjIds[2];                            //usGraphicObjIds[0]= GPU internal encoder, usGraphicObjIds[1]= external encoder 
+}ATOM_DISPLAY_EXTERNAL_OBJECT_PATH;
+
 typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE
 {
   UCHAR                           ucNumOfDispPath;
@@ -3261,6 +3745,47 @@ typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT         //usSrcDstTableOffset
 #define EXT_AUXDDC_LUTINDEX_7                   7
 #define MAX_NUMBER_OF_EXT_AUXDDC_LUT_ENTRIES   (EXT_AUXDDC_LUTINDEX_7+1)
 
+//ucChannelMapping are defined as following
+//for DP connector, eDP, DP to VGA/LVDS 
+//Bit[1:0]: Define which pin connect to DP connector DP_Lane0, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[3:2]: Define which pin connect to DP connector DP_Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[5:4]: Define which pin connect to DP connector DP_Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[7:6]: Define which pin connect to DP connector DP_Lane3, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+typedef struct _ATOM_DP_CONN_CHANNEL_MAPPING
+{
+#if ATOM_BIG_ENDIAN
+  UCHAR ucDP_Lane3_Source:2;
+  UCHAR ucDP_Lane2_Source:2;
+  UCHAR ucDP_Lane1_Source:2;
+  UCHAR ucDP_Lane0_Source:2;
+#else
+  UCHAR ucDP_Lane0_Source:2;
+  UCHAR ucDP_Lane1_Source:2;
+  UCHAR ucDP_Lane2_Source:2;
+  UCHAR ucDP_Lane3_Source:2;
+#endif
+}ATOM_DP_CONN_CHANNEL_MAPPING;
+
+//for DVI/HDMI, in dual link case, both links have to have same mapping. 
+//Bit[1:0]: Define which pin connect to DVI connector data Lane2, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[3:2]: Define which pin connect to DVI connector data Lane1, =0: source from GPU pin TX0, =1: from GPU pin TX1, =2: from GPU pin TX2, =3 from GPU pin TX3
+//Bit[5:4]: Define which pin connect to DVI connector data Lane0, =0: source from GPU pin TX0, =1: from GPU pin