Merge tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "The is the bulk of GPIO changes for the v4.16 kernel cycle. It is
  pretty calm this time around I think. I even got time to get to things
  like starting to clean up header includes.

  Core changes:

   - Disallow open drain and open source flags to be set simultaneously.
     This doesn't make electrical sense, and would the hardware actually
     respond to this setting, the result would be short circuit.

   - ACPI GPIO has a new core infrastructure for handling quirks. The
     quirks are there to deal with broken ACPI tables centrally instead
     of pushing the work to individual drivers. In the world of BIOS
     writers, the ACPI tables are perfect. Until they find a mistake in
     it. When such a mistake is found, we can patch it with a quirk. It
     should never happen, the problem is that it happens. So we
     accomodate for it.

   - Several documentation updates.

   - Revert the patch setting up initial direction state from reading
     the device. This was causing bad things for drivers that can't read
     status on all its pins. It is only affecting debugfs information
     quality.

   - Label descriptors with the device name if no explicit label is
     passed in.

   - Pave the ground for transitioning SPI and regulators to use GPIO
     descriptors by implementing some quirks in the device tree GPIO
     parsing code.

  New drivers:

   - New driver for the Access PCIe IDIO 24 family.

  Other:

   - Major refactorings and improvements to the GPIO mockup driver used
     for test and verification.

   - Moved the AXP209 driver over to pin control since it gained a pin
     control back-end. These patches will appear (with the same hashes)
     in the pin control pull request as well.

   - Convert the onewire GPIO driver w1-gpio to use descriptors. This is
     merged here since the W1 maintainers send very few pull requests
     and he ACKed it.

   - Start to clean up driver headers using <linux/gpio.h> to just use
     <linux/gpio/driver.h> as appropriate"

* tag 'gpio-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (103 commits)
  gpio: Timestamp events in hardirq handler
  gpio: Fix kernel stack leak to userspace
  gpio: Fix a documentation spelling mistake
  gpio: Documentation update
  gpiolib: remove redundant initialization of pointer desc
  gpio: of: Fix NPE from OF flags
  gpio: stmpe: Delete an unnecessary variable initialisation in stmpe_gpio_probe()
  gpio: stmpe: Move an assignment in stmpe_gpio_probe()
  gpio: stmpe: Improve a size determination in stmpe_gpio_probe()
  gpio: stmpe: Use seq_putc() in stmpe_dbg_show()
  gpio: No NULL owner
  gpio: stmpe: i2c transfer are forbiden in atomic context
  gpio: davinci: Include proper header
  gpio: da905x: Include proper header
  gpio: cs5535: Include proper header
  gpio: crystalcove: Include proper header
  gpio: bt8xx: Include proper header
  gpio: bcm-kona: Include proper header
  gpio: arizona: Include proper header
  gpio: amd8111: Include proper header
  ...

35 files changed, 1951 insertions, 533 deletions

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d6a8e851ad13..8dbb2280538d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -122,12 +122,6 @@ config GPIO_ATH79
 	  Select this option to enable GPIO driver for
 	  Atheros AR71XX/AR724X/AR913X SoC devices.
 
-config GPIO_AXP209
-	tristate "X-Powers AXP209 PMIC GPIO Support"
-	depends on MFD_AXP20X
-	help
-	  Say yes to enable GPIO support for the AXP209 PMIC
-
 config GPIO_BCM_KONA
 	bool "Broadcom Kona GPIO"
 	depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST)
@@ -704,6 +698,22 @@ config GPIO_TS5500
 	  blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
 	  LCD port.
 
+config GPIO_WINBOND
+	tristate "Winbond Super I/O GPIO support"
+	depends on ISA_BUS_API
+	help
+	  This option enables support for GPIOs found on Winbond Super I/O
+	  chips.
+	  Currently, only W83627UHG (also known as Nuvoton NCT6627UD) is
+	  supported.
+
+	  You will need to provide a module parameter "gpios", or a
+	  boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
+	  ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.).
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called gpio-winbond.
+
 config GPIO_WS16C48
 	tristate "WinSystems WS16C48 GPIO support"
 	depends on ISA_BUS_API
@@ -1234,6 +1244,16 @@ config GPIO_PCI_IDIO_16
 	  low). Input filter control is not supported by this driver, and the
 	  input filters are deactivated by this driver.
 
+config GPIO_PCIE_IDIO_24
+	tristate "ACCES PCIe-IDIO-24 GPIO support"
+	select GPIOLIB_IRQCHIP
+	help
+	  Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
+	  PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
+	  when any of the inputs change state (low to high or high to low).
+	  Input filter control is not supported by this driver, and the input
+	  filters are deactivated by this driver.
+
 config GPIO_RDC321X
 	tristate "RDC R-321x GPIO support"
 	select MFD_CORE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4bc24febb889..cccb0d40846c 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -32,7 +32,6 @@ obj-$(CONFIG_GPIO_AMDPT)	+= gpio-amdpt.o
 obj-$(CONFIG_GPIO_ARIZONA)	+= gpio-arizona.o
 obj-$(CONFIG_GPIO_ATH79)	+= gpio-ath79.o
 obj-$(CONFIG_GPIO_ASPEED)	+= gpio-aspeed.o
-obj-$(CONFIG_GPIO_AXP209)	+= gpio-axp209.o
 obj-$(CONFIG_GPIO_BCM_KONA)	+= gpio-bcm-kona.o
 obj-$(CONFIG_GPIO_BD9571MWV)	+= gpio-bd9571mwv.o
 obj-$(CONFIG_GPIO_BRCMSTB)	+= gpio-brcmstb.o
@@ -96,6 +95,7 @@ obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PCI_IDIO_16)	+= gpio-pci-idio-16.o
+obj-$(CONFIG_GPIO_PCIE_IDIO_24)	+= gpio-pcie-idio-24.o
 obj-$(CONFIG_GPIO_PISOSR)	+= gpio-pisosr.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_GPIO_PXA)		+= gpio-pxa.o
@@ -140,6 +140,7 @@ obj-$(CONFIG_GPIO_VIPERBOARD)	+= gpio-viperboard.o
 obj-$(CONFIG_GPIO_VR41XX)	+= gpio-vr41xx.o
 obj-$(CONFIG_GPIO_VX855)	+= gpio-vx855.o
 obj-$(CONFIG_GPIO_WHISKEY_COVE)	+= gpio-wcove.o
+obj-$(CONFIG_GPIO_WINBOND)	+= gpio-winbond.o
 obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
 obj-$(CONFIG_GPIO_WM8994)	+= gpio-wm8994.o
diff --git a/drivers/gpio/devres.c b/drivers/gpio/devres.c
index afbff155a0ba..e82cc763633c 100644
--- a/drivers/gpio/devres.c
+++ b/drivers/gpio/devres.c
@@ -125,6 +125,48 @@ struct gpio_desc *__must_check devm_gpiod_get_index(struct device *dev,
 EXPORT_SYMBOL(devm_gpiod_get_index);
 
 /**
+ * devm_gpiod_get_from_of_node() - obtain a GPIO from an OF node
+ * @dev:	device for lifecycle management
+ * @node:	handle of the OF node
+ * @propname:	name of the DT property representing the GPIO
+ * @index:	index of the GPIO to obtain for the consumer
+ * @dflags:	GPIO initialization flags
+ * @label:	label to attach to the requested GPIO
+ *
+ * Returns:
+ * On successful request the GPIO pin is configured in accordance with
+ * provided @dflags.
+ *
+ * In case of error an ERR_PTR() is returned.
+ */
+struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
+					      struct device_node *node,
+					      const char *propname, int index,
+					      enum gpiod_flags dflags,
+					      const char *label)
+{
+	struct gpio_desc **dr;
+	struct gpio_desc *desc;
+
+	dr = devres_alloc(devm_gpiod_release, sizeof(struct gpio_desc *),
+			  GFP_KERNEL);
+	if (!dr)
+		return ERR_PTR(-ENOMEM);
+
+	desc = gpiod_get_from_of_node(node, propname, index, dflags, label);
+	if (IS_ERR(desc)) {
+		devres_free(dr);
+		return desc;
+	}
+
+	*dr = desc;
+	devres_add(dev, dr);
+
+	return desc;
+}
+EXPORT_SYMBOL(devm_gpiod_get_from_of_node);
+
+/**
  * devm_fwnode_get_index_gpiod_from_child - get a GPIO descriptor from a
  *					    device's child node
  * @dev:	GPIO consumer
diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index 15a1f4b348c4..fb7b620763a2 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -9,12 +9,11 @@
  *  published by the Free Software Foundation.
  */
 
-#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 
diff --git a/drivers/gpio/gpio-adp5520.c b/drivers/gpio/gpio-adp5520.c
index abf199609546..21452622d954 100644
--- a/drivers/gpio/gpio-adp5520.c
+++ b/drivers/gpio/gpio-adp5520.c
@@ -12,8 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/adp5520.h>
-
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 struct adp5520_gpio {
 	struct device *master;
diff --git a/drivers/gpio/gpio-adp5588.c b/drivers/gpio/gpio-adp5588.c
index e717f8dc3966..3530ccd17e04 100644
--- a/drivers/gpio/gpio-adp5588.c
+++ b/drivers/gpio/gpio-adp5588.c
@@ -12,7 +12,7 @@
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
diff --git a/drivers/gpio/gpio-altera.c b/drivers/gpio/gpio-altera.c
index 8e76d390e653..8c3ff6e2366f 100644
--- a/drivers/gpio/gpio-altera.c
+++ b/drivers/gpio/gpio-altera.c
@@ -18,7 +18,8 @@
 
 #include <linux/io.h>
 #include <linux/module.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/of_gpio.h> /* For of_mm_gpio_chip */
 #include <linux/platform_device.h>
 
 #define ALTERA_GPIO_MAX_NGPIO		32
diff --git a/drivers/gpio/gpio-amd8111.c b/drivers/gpio/gpio-amd8111.c
index 30ad7d7c1678..fdcebe59510d 100644
--- a/drivers/gpio/gpio-amd8111.c
+++ b/drivers/gpio/gpio-amd8111.c
@@ -28,7 +28,7 @@
 #include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
index d4e6ba0301bc..ba51ea15f379 100644
--- a/drivers/gpio/gpio-arizona.c
+++ b/drivers/gpio/gpio-arizona.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/module.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/seq_file.h>
diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 6b3ca6601af2..77e485557498 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -60,6 +60,7 @@ struct aspeed_gpio_bank {
 	uint16_t	val_regs;
 	uint16_t	irq_regs;
 	uint16_t	debounce_regs;
+	uint16_t	tolerance_regs;
 	const char	names[4][3];
 };
 
@@ -70,48 +71,56 @@ static const struct aspeed_gpio_bank aspeed_gpio_banks[] = {
 		.val_regs = 0x0000,
 		.irq_regs = 0x0008,
 		.debounce_regs = 0x0040,
+		.tolerance_regs = 0x001c,
 		.names = { "A", "B", "C", "D" },
 	},
 	{
 		.val_regs = 0x0020,
 		.irq_regs = 0x0028,
 		.debounce_regs = 0x0048,
+		.tolerance_regs = 0x003c,
 		.names = { "E", "F", "G", "H" },
 	},
 	{
 		.val_regs = 0x0070,
 		.irq_regs = 0x0098,
 		.debounce_regs = 0x00b0,
+		.tolerance_regs = 0x00ac,
 		.names = { "I", "J", "K", "L" },
 	},
 	{
 		.val_regs = 0x0078,
 		.irq_regs = 0x00e8,
 		.debounce_regs = 0x0100,
+		.tolerance_regs = 0x00fc,
 		.names = { "M", "N", "O", "P" },
 	},
 	{
 		.val_regs = 0x0080,
 		.irq_regs = 0x0118,
 		.debounce_regs = 0x0130,
+		.tolerance_regs = 0x012c,
 		.names = { "Q", "R", "S", "T" },
 	},
 	{
 		.val_regs = 0x0088,
 		.irq_regs = 0x0148,
 		.debounce_regs = 0x0160,
+		.tolerance_regs = 0x015c,
 		.names = { "U", "V", "W", "X" },
 	},
 	{
 		.val_regs = 0x01E0,
 		.irq_regs = 0x0178,
 		.debounce_regs = 0x0190,
+		.tolerance_regs = 0x018c,
 		.names = { "Y", "Z", "AA", "AB" },
 	},
 	{
-		.val_regs = 0x01E8,
-		.irq_regs = 0x01A8,
+		.val_regs = 0x01e8,
+		.irq_regs = 0x01a8,
 		.debounce_regs = 0x01c0,
+		.tolerance_regs = 0x01bc,
 		.names = { "AC", "", "", "" },
 	},
 };
@@ -140,7 +149,7 @@ static const struct aspeed_gpio_bank *to_bank(unsigned int offset)
 {
 	unsigned int bank = GPIO_BANK(offset);
 
-	WARN_ON(bank > ARRAY_SIZE(aspeed_gpio_banks));
+	WARN_ON(bank >= ARRAY_SIZE(aspeed_gpio_banks));
 	return &aspeed_gpio_banks[bank];
 }
 
@@ -534,6 +543,30 @@ static int aspeed_gpio_setup_irqs(struct aspeed_gpio *gpio,
 	return 0;
 }
 
+static int aspeed_gpio_reset_tolerance(struct gpio_chip *chip,
+					unsigned int offset, bool enable)
+{
+	struct aspeed_gpio *gpio = gpiochip_get_data(chip);
+	const struct aspeed_gpio_bank *bank;
+	unsigned long flags;
+	u32 val;
+
+	bank = to_bank(offset);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+	val = readl(gpio->base + bank->tolerance_regs);
+
+	if (enable)
+		val |= GPIO_BIT(offset);
+	else
+		val &= ~GPIO_BIT(offset);
+
+	writel(val, gpio->base + bank->tolerance_regs);
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
 static int aspeed_gpio_request(struct gpio_chip *chip, unsigned int offset)
 {
 	if (!have_gpio(gpiochip_get_data(chip), offset))
@@ -771,6 +804,8 @@ static int aspeed_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 			param == PIN_CONFIG_DRIVE_OPEN_SOURCE)
 		/* Return -ENOTSUPP to trigger emulation, as per datasheet */
 		return -ENOTSUPP;
+	else if (param == PIN_CONFIG_PERSIST_STATE)
+		return aspeed_gpio_reset_tolerance(chip, offset, arg);
 
 	return -ENOTSUPP;
 }
diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
index 5fad89dfab7e..3ae7c1876bf4 100644
--- a/drivers/gpio/gpio-ath79.c
+++ b/drivers/gpio/gpio-ath79.c
@@ -324,3 +324,6 @@ static struct platform_driver ath79_gpio_driver = {
 };
 
 module_platform_driver(ath79_gpio_driver);
+
+MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpio/gpio-axp209.c b/drivers/gpio/gpio-axp209.c
deleted file mode 100644
index 4a346b7b4172..000000000000
--- a/drivers/gpio/gpio-axp209.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * AXP20x GPIO driver
- *
- * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under  the terms of the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/bitops.h>
-#include <linux/device.h>
-#include <linux/gpio/driver.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/axp20x.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-
-#define AXP20X_GPIO_FUNCTIONS		0x7
-#define AXP20X_GPIO_FUNCTION_OUT_LOW	0
-#define AXP20X_GPIO_FUNCTION_OUT_HIGH	1
-#define AXP20X_GPIO_FUNCTION_INPUT	2
-
-struct axp20x_gpio {
-	struct gpio_chip	chip;
-	struct regmap		*regmap;
-};
-
-static int axp20x_gpio_get_reg(unsigned offset)
-{
-	switch (offset) {
-	case 0:
-		return AXP20X_GPIO0_CTRL;
-	case 1:
-		return AXP20X_GPIO1_CTRL;
-	case 2:
-		return AXP20X_GPIO2_CTRL;
-	}
-
-	return -EINVAL;
-}
-
-static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	int reg;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
-
-	return regmap_update_bits(gpio->regmap, reg,
-				  AXP20X_GPIO_FUNCTIONS,
-				  AXP20X_GPIO_FUNCTION_INPUT);
-}
-
-static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val);
-	if (ret)
-		return ret;
-
-	return !!(val & BIT(offset + 4));
-}
-
-static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	unsigned int val;
-	int reg, ret;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
-
-	ret = regmap_read(gpio->regmap, reg, &val);
-	if (ret)
-		return ret;
-
-	/*
-	 * This shouldn't really happen if the pin is in use already,
-	 * or if it's not in use yet, it doesn't matter since we're
-	 * going to change the value soon anyway. Default to output.
-	 */
-	if ((val & AXP20X_GPIO_FUNCTIONS) > 2)
-		return 0;
-
-	/*
-	 * The GPIO directions are the three lowest values.
-	 * 2 is input, 0 and 1 are output
-	 */
-	return val & 2;
-}
-
-static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset,
-			      int value)
-{
-	struct axp20x_gpio *gpio = gpiochip_get_data(chip);
-	int reg;
-
-	reg = axp20x_gpio_get_reg(offset);
-	if (reg < 0)
-		return reg;
-
-	return regmap_update_bits(gpio->regmap, reg,
-				  AXP20X_GPIO_FUNCTIONS,
-				  value ? AXP20X_GPIO_FUNCTION_OUT_HIGH
-				  : AXP20X_GPIO_FUNCTION_OUT_LOW);
-}
-
-static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset,
-			    int value)
-{
-	axp20x_gpio_output(chip, offset, value);
-}
-
-static int axp20x_gpio_probe(struct platform_device *pdev)
-{
-	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
-	struct axp20x_gpio *gpio;
-	int ret;
-
-	if (!of_device_is_available(pdev->dev.of_node))
-		return -ENODEV;
-
-	if (!axp20x) {
-		dev_err(&pdev->dev, "Parent drvdata not set\n");
-		return -EINVAL;
-	}
-
-	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
-	if (!gpio)
-		return -ENOMEM;
-
-	gpio->chip.base			= -1;
-	gpio->chip.can_sleep		= true;
-	gpio->chip.parent		= &pdev->dev;
-	gpio->chip.label		= dev_name(&pdev->dev);
-	gpio->chip.owner		= THIS_MODULE;
-	gpio->chip.get			= axp20x_gpio_get;
-	gpio->chip.get_direction	= axp20x_gpio_get_direction;
-	gpio->chip.set			= axp20x_gpio_set;
-	gpio->chip.direction_input	= axp20x_gpio_input;
-	gpio->chip.direction_output	= axp20x_gpio_output;
-	gpio->chip.ngpio		= 3;
-
-	gpio->regmap = axp20x->regmap;
-
-	ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register GPIO chip\n");
-		return ret;
-	}
-
-	dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n");
-
-	return 0;
-}
-
-static const struct of_device_id axp20x_gpio_match[] = {
-	{ .compatible = "x-powers,axp209-gpio" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, axp20x_gpio_match);
-
-static struct platform_driver axp20x_gpio_driver = {
-	.probe		= axp20x_gpio_probe,
-	.driver = {
-		.name		= "axp20x-gpio",
-		.of_match_table	= axp20x_gpio_match,
-	},
-};
-
-module_platform_driver(axp20x_gpio_driver);
-
-MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
-MODULE_DESCRIPTION("AXP20x PMIC GPIO driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
index 76861a00bb92..eb8369b21e90 100644
--- a/drivers/gpio/gpio-bcm-kona.c
+++ b/drivers/gpio/gpio-bcm-kona.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/init.h>
@@ -127,7 +127,7 @@ static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
 	u32 val;
 
 	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
-	return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
+	return !!val;
 }
 
 static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
@@ -144,7 +144,7 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
 	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
 
 	/* this function only applies to output pin */
-	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
 		goto out;
 
 	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
@@ -170,7 +170,7 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
 	reg_base = kona_gpio->reg_base;
 	raw_spin_lock_irqsave(&kona_gpio->lock, flags);
 
-	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
+	if (bcm_kona_gpio_get_dir(chip, gpio) == 1)
 		reg_offset = GPIO_IN_STATUS(bank_id);
 	else
 		reg_offset = GPIO_OUT_STATUS(bank_id);
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index bb4f8cf18bd9..16c7f9f49416 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -19,7 +19,6 @@
 #include <linux/irqdomain.h>
 #include <linux/irqchip/chained_irq.h>
 #include <linux/interrupt.h>
-#include <linux/bitops.h>
 
 enum gio_reg_index {
 	GIO_REG_ODEN = 0,
diff --git a/drivers/gpio/gpio-bt8xx.c b/drivers/gpio/gpio-bt8xx.c
index acefb25e8eca..b8ec75cbd4b5 100644
--- a/drivers/gpio/gpio-bt8xx.c
+++ b/drivers/gpio/gpio-bt8xx.c
@@ -46,7 +46,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/spinlock.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/slab.h>
 
 /* Steal the hardware definitions from the bttv driver. */
diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c
index b6f0f729656c..58531d8b8c6e 100644
--- a/drivers/gpio/gpio-crystalcove.c
+++ b/drivers/gpio/gpio-crystalcove.c
@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/seq_file.h>
 #include <linux/bitops.h>
 #include <linux/regmap.h>
diff --git a/drivers/gpio/gpio-cs5535.c b/drivers/gpio/gpio-cs5535.c
index 90278b19aa0e..8814c8f47e57 100644
--- a/drivers/gpio/gpio-cs5535.c
+++ b/drivers/gpio/gpio-cs5535.c
@@ -12,7 +12,7 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/io.h>
 #include <linux/cs5535.h>
 #include <asm/msr.h>
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index dd8977cf3e85..b6d3e997eb26 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -15,7 +15,7 @@
 #include <linux/fs.h>
 #include <linux/uaccess.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/syscalls.h>
 #include <linux/seq_file.h>
 
diff --git a/drivers/gpio/gpio-da9055.c b/drivers/gpio/gpio-da9055.c
index 82053b52cba0..2f1b5d23b10c 100644
--- a/drivers/gpio/gpio-da9055.c
+++ b/drivers/gpio/gpio-da9055.c
@@ -13,7 +13,7 @@
  */
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 #include <linux/mfd/da9055/core.h>
 #include <linux/mfd/da9055/reg.h>
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index e4b3d7db68c9..0b951ca78ec4 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -9,7 +9,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
diff --git a/drivers/gpio/gpio-ftgpio010.c b/drivers/gpio/gpio-ftgpio010.c
index 7b3394fdc624..b7a3a2db699b 100644
--- a/drivers/gpio/gpio-ftgpio010.c
+++ b/drivers/gpio/gpio-ftgpio010.c
@@ -176,8 +176,8 @@ static int ftgpio_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(g->base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (!irq)
-		return -EINVAL;
+	if (irq <= 0)
+		return irq ? irq : -EINVAL;
 
 	ret = bgpio_init(&g->gc, dev, 4,
 			 g->base + GPIO_DATA_IN,
diff --git a/drivers/gpio/gpio-iop.c b/drivers/gp