diff options
author | Ard Biesheuvel <ardb@kernel.org> | 2020-04-13 18:21:35 +0200 |
---|---|---|
committer | Ard Biesheuvel <ardb@kernel.org> | 2020-05-19 18:23:22 +0200 |
commit | d0f9ca9be11f25ef4151195eab7ea36d136084f6 (patch) | |
tree | 842ac1c29d90b20a67b1d1f535246b707189c758 /drivers/firmware/efi/libstub/arm32-stub.c | |
parent | 35d57d1215ed0da3349180275b845f0c2ee62d08 (diff) |
ARM: decompressor: run decompressor in place if loaded via UEFI
The decompressor can load from anywhere in memory, and the only reason
the EFI stub code relocates it is to ensure it appears within the first
128 MiB of memory, so that the uncompressed kernel ends up at the right
offset in memory.
We can short circuit this, and simply jump into the decompressor startup
code at the point where it knows where the base of memory lives. This
also means there is no need to disable the MMU and caches, create new
page tables and re-enable them.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Diffstat (limited to 'drivers/firmware/efi/libstub/arm32-stub.c')
-rw-r--r-- | drivers/firmware/efi/libstub/arm32-stub.c | 45 |
1 files changed, 6 insertions, 39 deletions
diff --git a/drivers/firmware/efi/libstub/arm32-stub.c b/drivers/firmware/efi/libstub/arm32-stub.c index 7826553af2ba..0050d811bf20 100644 --- a/drivers/firmware/efi/libstub/arm32-stub.c +++ b/drivers/firmware/efi/libstub/arm32-stub.c @@ -199,14 +199,8 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, unsigned long kernel_base; efi_status_t status; - /* - * Verify that the DRAM base address is compatible with the ARM - * boot protocol, which determines the base of DRAM by masking - * off the low 27 bits of the address at which the zImage is - * loaded. These assumptions are made by the decompressor, - * before any memory map is available. - */ - kernel_base = round_up(dram_base, SZ_128M); + /* use a 16 MiB aligned base for the decompressed kernel */ + kernel_base = round_up(dram_base, SZ_16M) + TEXT_OFFSET; /* * Note that some platforms (notably, the Raspberry Pi 2) put @@ -215,41 +209,14 @@ efi_status_t handle_kernel_image(unsigned long *image_addr, * base of the kernel image is only partially used at the moment. * (Up to 5 pages are used for the swapper page tables) */ - kernel_base += TEXT_OFFSET - 5 * PAGE_SIZE; - - status = reserve_kernel_base(kernel_base, reserve_addr, reserve_size); + status = reserve_kernel_base(kernel_base - 5 * PAGE_SIZE, reserve_addr, + reserve_size); if (status != EFI_SUCCESS) { pr_efi_err("Unable to allocate memory for uncompressed kernel.\n"); return status; } - /* - * Relocate the zImage, so that it appears in the lowest 128 MB - * memory window. - */ - *image_addr = (unsigned long)image->image_base; - *image_size = image->image_size; - status = efi_relocate_kernel(image_addr, *image_size, *image_size, - kernel_base + MAX_UNCOMP_KERNEL_SIZE, 0, 0); - if (status != EFI_SUCCESS) { - pr_efi_err("Failed to relocate kernel.\n"); - efi_free(*reserve_size, *reserve_addr); - *reserve_size = 0; - return status; - } - - /* - * Check to see if we were able to allocate memory low enough - * in memory. The kernel determines the base of DRAM from the - * address at which the zImage is loaded. - */ - if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) { - pr_efi_err("Failed to relocate kernel, no low memory available.\n"); - efi_free(*reserve_size, *reserve_addr); - *reserve_size = 0; - efi_free(*image_size, *image_addr); - *image_size = 0; - return EFI_LOAD_ERROR; - } + *image_addr = kernel_base; + *image_size = 0; return EFI_SUCCESS; } |