Merge branch 'pm-cpufreq'

* pm-cpufreq: (167 commits)
  cpufreq: create per policy rwsem instead of per CPU cpu_policy_rwsem
  intel_pstate: Add Baytrail support
  intel_pstate: Refactor driver to support CPUs with different MSR layouts
  cpufreq: Implement light weight ->target_index() routine
  PM / OPP: rename header to linux/pm_opp.h
  PM / OPP: rename data structures to dev_pm equivalents
  PM / OPP: rename functions to dev_pm_opp*
  cpufreq / governor: Remove fossil comment
  cpufreq: exynos4210: Use the common clock framework to set APLL clock rate
  cpufreq: exynos4x12: Use the common clock framework to set APLL clock rate
  cpufreq: Detect spurious invocations of update_policy_cpu()
  cpufreq: pmac64: enable cpufreq on iMac G5 (iSight) model
  cpufreq: pmac64: provide cpufreq transition latency for older G5 models
  cpufreq: pmac64: speed up frequency switch
  cpufreq: highbank-cpufreq: Enable Midway/ECX-2000
  exynos-cpufreq: fix false return check from "regulator_set_voltage"
  speedstep-centrino: Remove unnecessary braces
  acpi-cpufreq: Add comment under ACPI_ADR_SPACE_SYSTEM_IO case
  cpufreq: arm-big-little: use clk_get instead of clk_get_sys
  cpufreq: exynos: Show a list of available frequencies
  ...

Conflicts:
	drivers/devfreq/exynos/exynos5_bus.c

66 files changed, 822 insertions, 2326 deletions

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 534fcb825153..38093e272377 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -17,15 +17,11 @@ config CPU_FREQ
 
 if CPU_FREQ
 
-config CPU_FREQ_TABLE
-	tristate
-
 config CPU_FREQ_GOV_COMMON
 	bool
 
 config CPU_FREQ_STAT
 	tristate "CPU frequency translation statistics"
-	select CPU_FREQ_TABLE
 	default y
 	help
 	  This driver exports CPU frequency statistics information through sysfs
@@ -143,7 +139,6 @@ config CPU_FREQ_GOV_USERSPACE
 
 config CPU_FREQ_GOV_ONDEMAND
 	tristate "'ondemand' cpufreq policy governor"
-	select CPU_FREQ_TABLE
 	select CPU_FREQ_GOV_COMMON
 	help
 	  'ondemand' - This driver adds a dynamic cpufreq policy governor.
@@ -187,7 +182,6 @@ config CPU_FREQ_GOV_CONSERVATIVE
 config GENERIC_CPUFREQ_CPU0
 	tristate "Generic CPU0 cpufreq driver"
 	depends on HAVE_CLK && REGULATOR && PM_OPP && OF
-	select CPU_FREQ_TABLE
 	help
 	  This adds a generic cpufreq driver for CPU0 frequency management.
 	  It supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
@@ -223,7 +217,6 @@ depends on IA64
 
 config IA64_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
 	depends on ACPI_PROCESSOR
 	help
 	This driver adds a CPUFreq driver which utilizes the ACPI
@@ -240,7 +233,6 @@ depends on MIPS
 
 config LOONGSON2_CPUFREQ
 	tristate "Loongson2 CPUFreq Driver"
-	select CPU_FREQ_TABLE
 	help
 	  This option adds a CPUFreq driver for loongson processors which
 	  support software configurable cpu frequency.
@@ -262,7 +254,6 @@ menu "SPARC CPU frequency scaling drivers"
 depends on SPARC64
 config SPARC_US3_CPUFREQ
 	tristate "UltraSPARC-III CPU Frequency driver"
-	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for UltraSPARC-III processors.
 
@@ -272,7 +263,6 @@ config SPARC_US3_CPUFREQ
 
 config SPARC_US2E_CPUFREQ
 	tristate "UltraSPARC-IIe CPU Frequency driver"
-	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for UltraSPARC-IIe processors.
 
@@ -285,7 +275,6 @@ menu "SH CPU Frequency scaling"
 depends on SUPERH
 config SH_CPU_FREQ
 	tristate "SuperH CPU Frequency driver"
-	select CPU_FREQ_TABLE
 	help
 	  This adds the cpufreq driver for SuperH. Any CPU that supports
 	  clock rate rounding through the clock framework can use this
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 0fa204b244bd..701ec95ce954 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -5,7 +5,6 @@
 config ARM_BIG_LITTLE_CPUFREQ
 	tristate "Generic ARM big LITTLE CPUfreq driver"
 	depends on ARM_CPU_TOPOLOGY && PM_OPP && HAVE_CLK
-	select CPU_FREQ_TABLE
 	help
 	  This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
 
@@ -18,7 +17,6 @@ config ARM_DT_BL_CPUFREQ
 
 config ARM_EXYNOS_CPUFREQ
 	bool
-	select CPU_FREQ_TABLE
 
 config ARM_EXYNOS4210_CPUFREQ
 	bool "SAMSUNG EXYNOS4210"
@@ -58,7 +56,6 @@ config ARM_EXYNOS5440_CPUFREQ
 	depends on SOC_EXYNOS5440
 	depends on HAVE_CLK && PM_OPP && OF
 	default y
-	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Samsung EXYNOS5440
 	  SoC. The nature of exynos5440 clock controller is
@@ -85,7 +82,6 @@ config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6Q cpufreq support"
 	depends on SOC_IMX6Q
 	depends on REGULATOR_ANATOP
-	select CPU_FREQ_TABLE
 	help
 	  This adds cpufreq driver support for Freescale i.MX6Q SOC.
 
@@ -101,7 +97,6 @@ config ARM_INTEGRATOR
 
 config ARM_KIRKWOOD_CPUFREQ
 	def_bool ARCH_KIRKWOOD && OF
-	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
@@ -110,7 +105,6 @@ config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
 	depends on ARCH_OMAP2PLUS
 	default ARCH_OMAP2PLUS
-	select CPU_FREQ_TABLE
 
 config ARM_S3C_CPUFREQ
 	bool
@@ -165,7 +159,6 @@ config ARM_S3C2412_CPUFREQ
 config ARM_S3C2416_CPUFREQ
 	bool "S3C2416 CPU Frequency scaling support"
 	depends on CPU_S3C2416
-	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for the Samsung S3C2416 and
 	  S3C2450 SoC. The S3C2416 supports changing the rate of the
@@ -196,7 +189,6 @@ config ARM_S3C2440_CPUFREQ
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410
-	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
@@ -206,7 +198,6 @@ config ARM_S3C64XX_CPUFREQ
 config ARM_S5PV210_CPUFREQ
 	bool "Samsung S5PV210 and S5PC110"
 	depends on CPU_S5PV210
-	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver for Samsung S5PV210 and
@@ -223,7 +214,6 @@ config ARM_SA1110_CPUFREQ
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR
-	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
@@ -231,7 +221,6 @@ config ARM_SPEAR_CPUFREQ
 config ARM_TEGRA_CPUFREQ
 	bool "TEGRA CPUFreq support"
 	depends on ARCH_TEGRA
-	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the CPUFreq driver support for TEGRA SOCs.
diff --git a/drivers/cpufreq/Kconfig.powerpc b/drivers/cpufreq/Kconfig.powerpc
index 25ca9db62e09..ca0021a96e19 100644
--- a/drivers/cpufreq/Kconfig.powerpc
+++ b/drivers/cpufreq/Kconfig.powerpc
@@ -1,7 +1,6 @@
 config CPU_FREQ_CBE
 	tristate "CBE frequency scaling"
 	depends on CBE_RAS && PPC_CELL
-	select CPU_FREQ_TABLE
 	default m
 	help
 	  This adds the cpufreq driver for Cell BE processors.
@@ -20,7 +19,6 @@ config CPU_FREQ_CBE_PMI
 config CPU_FREQ_MAPLE
 	bool "Support for Maple 970FX Evaluation Board"
 	depends on PPC_MAPLE
-	select CPU_FREQ_TABLE
 	help
 	  This adds support for frequency switching on Maple 970FX
 	  Evaluation Board and compatible boards (IBM JS2x blades).
@@ -28,7 +26,6 @@ config CPU_FREQ_MAPLE
 config PPC_CORENET_CPUFREQ
 	tristate "CPU frequency scaling driver for Freescale E500MC SoCs"
 	depends on PPC_E500MC && OF && COMMON_CLK
-	select CPU_FREQ_TABLE
 	select CLK_PPC_CORENET
 	help
 	  This adds the CPUFreq driver support for Freescale e500mc,
@@ -38,7 +35,6 @@ config PPC_CORENET_CPUFREQ
 config CPU_FREQ_PMAC
 	bool "Support for Apple PowerBooks"
 	depends on ADB_PMU && PPC32
-	select CPU_FREQ_TABLE
 	help
 	  This adds support for frequency switching on Apple PowerBooks,
 	  this currently includes some models of iBook & Titanium
@@ -47,7 +43,6 @@ config CPU_FREQ_PMAC
 config CPU_FREQ_PMAC64
 	bool "Support for some Apple G5s"
 	depends on PPC_PMAC && PPC64
-	select CPU_FREQ_TABLE
 	help
 	  This adds support for frequency switching on Apple iMac G5,
 	  and some of the more recent desktop G5 machines as well.
@@ -55,7 +50,6 @@ config CPU_FREQ_PMAC64
 config PPC_PASEMI_CPUFREQ
 	bool "Support for PA Semi PWRficient"
 	depends on PPC_PASEMI
-	select CPU_FREQ_TABLE
 	default y
 	help
 	  This adds the support for frequency switching on PA Semi
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index e2b6eabef221..6897ad85b046 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -31,7 +31,6 @@ config X86_PCC_CPUFREQ
 
 config X86_ACPI_CPUFREQ
 	tristate "ACPI Processor P-States driver"
-	select CPU_FREQ_TABLE
 	depends on ACPI_PROCESSOR
 	help
 	  This driver adds a CPUFreq driver which utilizes the ACPI
@@ -60,7 +59,6 @@ config X86_ACPI_CPUFREQ_CPB
 
 config ELAN_CPUFREQ
 	tristate "AMD Elan SC400 and SC410"
-	select CPU_FREQ_TABLE
 	depends on MELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC400 and SC410
@@ -76,7 +74,6 @@ config ELAN_CPUFREQ
 
 config SC520_CPUFREQ
 	tristate "AMD Elan SC520"
-	select CPU_FREQ_TABLE
 	depends on MELAN
 	---help---
 	  This adds the CPUFreq driver for AMD Elan SC520 processor.
@@ -88,7 +85,6 @@ config SC520_CPUFREQ
 
 config X86_POWERNOW_K6
 	tristate "AMD Mobile K6-2/K6-3 PowerNow!"
-	select CPU_FREQ_TABLE
 	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
@@ -100,7 +96,6 @@ config X86_POWERNOW_K6
 
 config X86_POWERNOW_K7
 	tristate "AMD Mobile Athlon/Duron PowerNow!"
-	select CPU_FREQ_TABLE
 	depends on X86_32
 	help
 	  This adds the CPUFreq driver for mobile AMD K7 mobile processors.
@@ -118,7 +113,6 @@ config X86_POWERNOW_K7_ACPI
 
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
-	select CPU_FREQ_TABLE
 	depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ
 	help
 	  This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors.
@@ -132,7 +126,6 @@ config X86_POWERNOW_K8
 config X86_AMD_FREQ_SENSITIVITY
 	tristate "AMD frequency sensitivity feedback powersave bias"
 	depends on CPU_FREQ_GOV_ONDEMAND && X86_ACPI_CPUFREQ && CPU_SUP_AMD
-	select CPU_FREQ_TABLE
 	help
 	  This adds AMD-specific powersave bias function to the ondemand
 	  governor, which allows it to make more power-conscious frequency
@@ -160,7 +153,6 @@ config X86_GX_SUSPMOD
 
 config X86_SPEEDSTEP_CENTRINO
 	tristate "Intel Enhanced SpeedStep (deprecated)"
-	select CPU_FREQ_TABLE
 	select X86_SPEEDSTEP_CENTRINO_TABLE if X86_32
 	depends on X86_32 || (X86_64 && ACPI_PROCESSOR)
 	help
@@ -190,7 +182,6 @@ config X86_SPEEDSTEP_CENTRINO_TABLE
 
 config X86_SPEEDSTEP_ICH
 	tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
-	select CPU_FREQ_TABLE
 	depends on X86_32
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
@@ -204,7 +195,6 @@ config X86_SPEEDSTEP_ICH
 
 config X86_SPEEDSTEP_SMI
 	tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
-	select CPU_FREQ_TABLE
 	depends on X86_32
 	help
 	  This adds the CPUFreq driver for certain mobile Intel Pentium III
@@ -217,7 +207,6 @@ config X86_SPEEDSTEP_SMI
 
 config X86_P4_CLOCKMOD
 	tristate "Intel Pentium 4 clock modulation"
-	select CPU_FREQ_TABLE
 	help
 	  This adds the CPUFreq driver for Intel Pentium 4 / XEON
 	  processors.  When enabled it will lower CPU temperature by skipping
@@ -259,7 +248,6 @@ config X86_LONGRUN
 
 config X86_LONGHAUL
 	tristate "VIA Cyrix III Longhaul"
-	select CPU_FREQ_TABLE
 	depends on X86_32 && ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for VIA Samuel/CyrixIII,
@@ -272,7 +260,6 @@ config X86_LONGHAUL
 
 config X86_E_POWERSAVER
 	tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
-	select CPU_FREQ_TABLE
 	depends on X86_32 && ACPI_PROCESSOR
 	help
 	  This adds the CPUFreq driver for VIA C7 processors.  However, this driver
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ad5866c2ada0..b7948bbbbf1f 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -1,5 +1,5 @@
 # CPUfreq core
-obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
+obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o freq_table.o
 # CPUfreq stats
 obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o
 
@@ -11,9 +11,6 @@ obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND)	+= cpufreq_ondemand.o
 obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)	+= cpufreq_conservative.o
 obj-$(CONFIG_CPU_FREQ_GOV_COMMON)		+= cpufreq_governor.o
 
-# CPUfreq cross-arch helpers
-obj-$(CONFIG_CPU_FREQ_TABLE)		+= freq_table.o
-
 obj-$(CONFIG_GENERIC_CPUFREQ_CPU0)	+= cpufreq-cpu0.o
 
 ##################################################################################
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index 506fd23c7550..e4bc19552d2b 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -424,17 +424,17 @@ static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
 }
 
 static int acpi_cpufreq_target(struct cpufreq_policy *policy,
-			       unsigned int target_freq, unsigned int relation)
+			       unsigned int index)
 {
 	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
 	struct acpi_processor_performance *perf;
 	struct cpufreq_freqs freqs;
 	struct drv_cmd cmd;
-	unsigned int next_state = 0; /* Index into freq_table */
 	unsigned int next_perf_state = 0; /* Index into perf table */
 	int result = 0;
 
-	pr_debug("acpi_cpufreq_target %d (%d)\n", target_freq, policy->cpu);
+	pr_debug("acpi_cpufreq_target %d (%d)\n",
+			data->freq_table[index].frequency, policy->cpu);
 
 	if (unlikely(data == NULL ||
 	     data->acpi_data == NULL || data->freq_table == NULL)) {
@@ -442,16 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	}
 
 	perf = data->acpi_data;
-	result = cpufreq_frequency_table_target(policy,
-						data->freq_table,
-						target_freq,
-						relation, &next_state);
-	if (unlikely(result)) {
-		result = -ENODEV;
-		goto out;
-	}
-
-	next_perf_state = data->freq_table[next_state].driver_data;
+	next_perf_state = data->freq_table[index].driver_data;
 	if (perf->state == next_perf_state) {
 		if (unlikely(data->resume)) {
 			pr_debug("Called after resume, resetting to P%d\n",
@@ -493,7 +484,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		cmd.mask = cpumask_of(policy->cpu);
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
-	freqs.new = data->freq_table[next_state].frequency;
+	freqs.new = data->freq_table[index].frequency;
 	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
 
 	drv_write(&cmd);
@@ -516,15 +507,6 @@ out:
 	return result;
 }
 
-static int acpi_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	struct acpi_cpufreq_data *data = per_cpu(acfreq_data, policy->cpu);
-
-	pr_debug("acpi_cpufreq_verify\n");
-
-	return cpufreq_frequency_table_verify(policy, data->freq_table);
-}
-
 static unsigned long
 acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
 {
@@ -837,7 +819,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
 	perf->state = 0;
 
-	result = cpufreq_frequency_table_cpuinfo(policy, data->freq_table);
+	result = cpufreq_table_validate_and_show(policy, data->freq_table);
 	if (result)
 		goto err_freqfree;
 
@@ -846,12 +828,16 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 
 	switch (perf->control_register.space_id) {
 	case ACPI_ADR_SPACE_SYSTEM_IO:
-		/* Current speed is unknown and not detectable by IO port */
+		/*
+		 * The core will not set policy->cur, because
+		 * cpufreq_driver->get is NULL, so we need to set it here.
+		 * However, we have to guess it, because the current speed is
+		 * unknown and not detectable via IO ports.
+		 */
 		policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
 		break;
 	case ACPI_ADR_SPACE_FIXED_HARDWARE:
 		acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
-		policy->cur = get_cur_freq_on_cpu(cpu);
 		break;
 	default:
 		break;
@@ -868,8 +854,6 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 			(u32) perf->states[i].power,
 			(u32) perf->states[i].transition_latency);
 
-	cpufreq_frequency_table_get_attr(data->freq_table, policy->cpu);
-
 	/*
 	 * the first call to ->target() should result in us actually
 	 * writing something to the appropriate registers.
@@ -929,8 +913,8 @@ static struct freq_attr *acpi_cpufreq_attr[] = {
 };
 
 static struct cpufreq_driver acpi_cpufreq_driver = {
-	.verify		= acpi_cpufreq_verify,
-	.target		= acpi_cpufreq_target,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= acpi_cpufreq_target,
 	.bios_limit	= acpi_processor_get_bios_limit,
 	.init		= acpi_cpufreq_cpu_init,
 	.exit		= acpi_cpufreq_cpu_exit,
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index 3549f0784af1..163e3378fe17 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -25,7 +25,7 @@
 #include <linux/cpumask.h>
 #include <linux/export.h>
 #include <linux/of_platform.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/topology.h>
 #include <linux/types.h>
@@ -47,38 +47,23 @@ static unsigned int bL_cpufreq_get(unsigned int cpu)
 	return clk_get_rate(clk[cur_cluster]) / 1000;
 }
 
-/* Validate policy frequency range */