ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 1469 insertions, 0 deletions

diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
new file mode 100644
index 000000000000..cb8a0d3109f0
--- /dev/null
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -0,0 +1,1469 @@
+/******************************************************************************
+ *
+ * Module Name: dsopcode - Dispatcher Op Region support and handling of
+ *                         "control" opcodes
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2008, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/accommon.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+#include <acpi/actables.h>
+
+#define _COMPONENT          ACPI_DISPATCHER
+ACPI_MODULE_NAME("dsopcode")
+
+/* Local prototypes */
+static acpi_status
+acpi_ds_execute_arguments(struct acpi_namespace_node *node,
+			  struct acpi_namespace_node *scope_node,
+			  u32 aml_length, u8 * aml_start);
+
+static acpi_status
+acpi_ds_init_buffer_field(u16 aml_opcode,
+			  union acpi_operand_object *obj_desc,
+			  union acpi_operand_object *buffer_desc,
+			  union acpi_operand_object *offset_desc,
+			  union acpi_operand_object *length_desc,
+			  union acpi_operand_object *result_desc);
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_execute_arguments
+ *
+ * PARAMETERS:  Node                - Object NS node
+ *              scope_node          - Parent NS node
+ *              aml_length          - Length of executable AML
+ *              aml_start           - Pointer to the AML
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Late (deferred) execution of region or field arguments
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ds_execute_arguments(struct acpi_namespace_node *node,
+			  struct acpi_namespace_node *scope_node,
+			  u32 aml_length, u8 * aml_start)
+{
+	acpi_status status;
+	union acpi_parse_object *op;
+	struct acpi_walk_state *walk_state;
+
+	ACPI_FUNCTION_TRACE(ds_execute_arguments);
+
+	/*
+	 * Allocate a new parser op to be the root of the parsed tree
+	 */
+	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
+	if (!op) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	/* Save the Node for use in acpi_ps_parse_aml */
+
+	op->common.node = scope_node;
+
+	/* Create and initialize a new parser state */
+
+	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
+	if (!walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
+				       aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
+	if (ACPI_FAILURE(status)) {
+		acpi_ds_delete_walk_state(walk_state);
+		goto cleanup;
+	}
+
+	/* Mark this parse as a deferred opcode */
+
+	walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
+	walk_state->deferred_node = node;
+
+	/* Pass1: Parse the entire declaration */
+
+	status = acpi_ps_parse_aml(walk_state);
+	if (ACPI_FAILURE(status)) {
+		goto cleanup;
+	}
+
+	/* Get and init the Op created above */
+
+	op->common.node = node;
+	acpi_ps_delete_parse_tree(op);
+
+	/* Evaluate the deferred arguments */
+
+	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
+	if (!op) {
+		return_ACPI_STATUS(AE_NO_MEMORY);
+	}
+
+	op->common.node = scope_node;
+
+	/* Create and initialize a new parser state */
+
+	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
+	if (!walk_state) {
+		status = AE_NO_MEMORY;
+		goto cleanup;
+	}
+
+	/* Execute the opcode and arguments */
+
+	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
+				       aml_length, NULL, ACPI_IMODE_EXECUTE);
+	if (ACPI_FAILURE(status)) {
+		acpi_ds_delete_walk_state(walk_state);
+		goto cleanup;
+	}
+
+	/* Mark this execution as a deferred opcode */
+
+	walk_state->deferred_node = node;
+	status = acpi_ps_parse_aml(walk_state);
+
+      cleanup:
+	acpi_ps_delete_parse_tree(op);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_buffer_field_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid buffer_field object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
+ *              evaluation of these field attributes.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
+{
+	union acpi_operand_object *extra_desc;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the AML pointer (method object) and buffer_field node */
+
+	extra_desc = acpi_ns_get_secondary_object(obj_desc);
+	node = obj_desc->buffer_field.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+			(ACPI_TYPE_BUFFER_FIELD, node, NULL));
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
+			  acpi_ut_get_node_name(node)));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
+					   extra_desc->extra.aml_length,
+					   extra_desc->extra.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_bank_field_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid bank_field object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get bank_field bank_value. This implements the late
+ *              evaluation of these field attributes.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc)
+{
+	union acpi_operand_object *extra_desc;
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_bank_field_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the AML pointer (method object) and bank_field node */
+
+	extra_desc = acpi_ns_get_secondary_object(obj_desc);
+	node = obj_desc->bank_field.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+			(ACPI_TYPE_LOCAL_BANK_FIELD, node, NULL));
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BankField Arg Init\n",
+			  acpi_ut_get_node_name(node)));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
+					   extra_desc->extra.aml_length,
+					   extra_desc->extra.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_buffer_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid Buffer object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
+ *              the late evaluation of these attributes.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
+{
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the Buffer node */
+
+	node = obj_desc->buffer.node;
+	if (!node) {
+		ACPI_ERROR((AE_INFO,
+			    "No pointer back to NS node in buffer obj %p",
+			    obj_desc));
+		return_ACPI_STATUS(AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, node,
+					   obj_desc->buffer.aml_length,
+					   obj_desc->buffer.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_package_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid Package object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get Package length and initializer byte list.  This implements
+ *              the late evaluation of these attributes.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
+{
+	struct acpi_namespace_node *node;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
+
+	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	/* Get the Package node */
+
+	node = obj_desc->package.node;
+	if (!node) {
+		ACPI_ERROR((AE_INFO,
+			    "No pointer back to NS node in package %p",
+			    obj_desc));
+		return_ACPI_STATUS(AE_AML_INTERNAL);
+	}
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
+
+	/* Execute the AML code for the term_arg arguments */
+
+	status = acpi_ds_execute_arguments(node, node,
+					   obj_desc->package.aml_length,
+					   obj_desc->package.aml_start);
+	return_ACPI_STATUS(status);
+}
+
+/*****************************************************************************
+ *
+ * FUNCTION:    acpi_ds_get_region_arguments
+ *
+ * PARAMETERS:  obj_desc        - A valid region object
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Get region address and length.  This implements the late
+ *              evaluation of these region attributes.
+ *
+ ****************************************************************************/
+
+acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
+{
+	struct acpi_namespace_node *node;
+	acpi_status status;
+	union acpi_operand_object *extra_desc;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
+
+	if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
+		return_ACPI_STATUS(AE_OK);
+	}
+
+	extra_desc = acpi_ns_get_secondary_object(obj_desc);
+	if (!extra_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	/* Get the Region node */
+
+	node = obj_desc->region.node;
+
+	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
+			(ACPI_TYPE_REGION, node, NULL));
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
+			  acpi_ut_get_node_name(node),
+			  extra_desc->extra.aml_start));
+
+	/* Execute the argument AML */
+
+	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
+					   extra_desc->extra.aml_length,
+					   extra_desc->extra.aml_start);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Validate the region address/length via the host OS */
+
+	status = acpi_os_validate_address(obj_desc->region.space_id,
+					  obj_desc->region.address,
+					  (acpi_size) obj_desc->region.length,
+					  acpi_ut_get_node_name(node));
+
+	if (ACPI_FAILURE(status)) {
+		/*
+		 * Invalid address/length. We will emit an error message and mark
+		 * the region as invalid, so that it will cause an additional error if
+		 * it is ever used. Then return AE_OK.
+		 */
+		ACPI_EXCEPTION((AE_INFO, status,
+				"During address validation of OpRegion [%4.4s]",
+				node->name.ascii));
+		obj_desc->common.flags |= AOPOBJ_INVALID;
+		status = AE_OK;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_initialize_region
+ *
+ * PARAMETERS:  obj_handle      - Region namespace node
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Front end to ev_initialize_region
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
+{
+	union acpi_operand_object *obj_desc;
+	acpi_status status;
+
+	obj_desc = acpi_ns_get_attached_object(obj_handle);
+
+	/* Namespace is NOT locked */
+
+	status = acpi_ev_initialize_region(obj_desc, FALSE);
+	return (status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_buffer_field
+ *
+ * PARAMETERS:  aml_opcode      - create_xxx_field
+ *              obj_desc        - buffer_field object
+ *              buffer_desc     - Host Buffer
+ *              offset_desc     - Offset into buffer
+ *              length_desc     - Length of field (CREATE_FIELD_OP only)
+ *              result_desc     - Where to store the result
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Perform actual initialization of a buffer field
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ds_init_buffer_field(u16 aml_opcode,
+			  union acpi_operand_object *obj_desc,
+			  union acpi_operand_object *buffer_desc,
+			  union acpi_operand_object *offset_desc,
+			  union acpi_operand_object *length_desc,
+			  union acpi_operand_object *result_desc)
+{
+	u32 offset;
+	u32 bit_offset;
+	u32 bit_count;
+	u8 field_flags;
+	acpi_status status;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
+
+	/* Host object must be a Buffer */
+
+	if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
+		ACPI_ERROR((AE_INFO,
+			    "Target of Create Field is not a Buffer object - %s",
+			    acpi_ut_get_object_type_name(buffer_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup;
+	}
+
+	/*
+	 * The last parameter to all of these opcodes (result_desc) started
+	 * out as a name_string, and should therefore now be a NS node
+	 * after resolution in acpi_ex_resolve_operands().
+	 */
+	if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
+		ACPI_ERROR((AE_INFO,
+			    "(%s) destination not a NS Node [%s]",
+			    acpi_ps_get_opcode_name(aml_opcode),
+			    acpi_ut_get_descriptor_name(result_desc)));
+
+		status = AE_AML_OPERAND_TYPE;
+		goto cleanup;
+	}
+
+	offset = (u32) offset_desc->integer.value;
+
+	/*
+	 * Setup the Bit offsets and counts, according to the opcode
+	 */
+	switch (aml_opcode) {
+	case AML_CREATE_FIELD_OP:
+
+		/* Offset is in bits, count is in bits */
+
+		field_flags = AML_FIELD_ACCESS_BYTE;
+		bit_offset = offset;
+		bit_count = (u32) length_desc->integer.value;
+
+		/* Must have a valid (>0) bit count */
+
+		if (bit_count == 0) {
+			ACPI_ERROR((AE_INFO,
+				    "Attempt to CreateField of length zero"));
+			status = AE_AML_OPERAND_VALUE;
+			goto cleanup;
+		}
+		break;
+
+	case AML_CREATE_BIT_FIELD_OP:
+
+		/* Offset is in bits, Field is one bit */
+
+		bit_offset = offset;
+		bit_count = 1;
+		field_flags = AML_FIELD_ACCESS_BYTE;
+		break;
+
+	case AML_CREATE_BYTE_FIELD_OP:
+
+		/* Offset is in bytes, field is one byte */
+
+		bit_offset = 8 * offset;
+		bit_count = 8;
+		field_flags = AML_FIELD_ACCESS_BYTE;
+		break;
+
+	case AML_CREATE_WORD_FIELD_OP:
+
+		/* Offset is in bytes, field is one word */
+
+		bit_offset = 8 * offset;
+		bit_count = 16;
+		field_flags = AML_FIELD_ACCESS_WORD;
+		break;
+
+	case AML_CREATE_DWORD_FIELD_OP:
+
+		/* Offset is in bytes, field is one dword */
+
+		bit_offset = 8 * offset;
+		bit_count = 32;
+		field_flags = AML_FIELD_ACCESS_DWORD;
+		break;
+
+	case AML_CREATE_QWORD_FIELD_OP:
+
+		/* Offset is in bytes, field is one qword */
+
+		bit_offset = 8 * offset;
+		bit_count = 64;
+		field_flags = AML_FIELD_ACCESS_QWORD;
+		break;
+
+	default:
+
+		ACPI_ERROR((AE_INFO,
+			    "Unknown field creation opcode %02x", aml_opcode));
+		status = AE_AML_BAD_OPCODE;
+		goto cleanup;
+	}
+
+	/* Entire field must fit within the current length of the buffer */
+
+	if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
+		ACPI_ERROR((AE_INFO,
+			    "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
+			    acpi_ut_get_node_name(result_desc),
+			    bit_offset + bit_count,
+			    acpi_ut_get_node_name(buffer_desc->buffer.node),
+			    8 * (u32) buffer_desc->buffer.length));
+		status = AE_AML_BUFFER_LIMIT;
+		goto cleanup;
+	}
+
+	/*
+	 * Initialize areas of the field object that are common to all fields
+	 * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
+	 * UPDATE_RULE = 0 (UPDATE_PRESERVE)
+	 */
+	status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
+						  bit_offset, bit_count);
+	if (ACPI_FAILURE(status)) {
+		goto cleanup;
+	}
+
+	obj_desc->buffer_field.buffer_obj = buffer_desc;
+
+	/* Reference count for buffer_desc inherits obj_desc count */
+
+	buffer_desc->common.reference_count = (u16)
+	    (buffer_desc->common.reference_count +
+	     obj_desc->common.reference_count);
+
+      cleanup:
+
+	/* Always delete the operands */
+
+	acpi_ut_remove_reference(offset_desc);
+	acpi_ut_remove_reference(buffer_desc);
+
+	if (aml_opcode == AML_CREATE_FIELD_OP) {
+		acpi_ut_remove_reference(length_desc);
+	}
+
+	/* On failure, delete the result descriptor */
+
+	if (ACPI_FAILURE(status)) {
+		acpi_ut_remove_reference(result_desc);	/* Result descriptor */
+	} else {
+		/* Now the address and length are valid for this buffer_field */
+
+		obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_buffer_field_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid buffer_field Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get buffer_field Buffer and Index
+ *              Called from acpi_ds_exec_end_op during buffer_field parse tree walk
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
+				   union acpi_parse_object *op)
+{
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+	struct acpi_namespace_node *node;
+	union acpi_parse_object *next_op;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
+
+	/*
+	 * This is where we evaluate the address and length fields of the
+	 * create_xxx_field declaration
+	 */
+	node = op->common.node;
+
+	/* next_op points to the op that holds the Buffer */
+
+	next_op = op->common.value.arg;
+
+	/* Evaluate/create the address and length operands */
+
+	status = acpi_ds_create_operands(walk_state, next_op);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	obj_desc = acpi_ns_get_attached_object(node);
+	if (!obj_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	/* Resolve the operands */
+
+	status = acpi_ex_resolve_operands(op->common.aml_opcode,
+					  ACPI_WALK_OPERANDS, walk_state);
+	if (ACPI_FAILURE(status)) {
+		ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
+			    acpi_ps_get_opcode_name(op->common.aml_opcode),
+			    status));
+
+		return_ACPI_STATUS(status);
+	}
+
+	/* Initialize the Buffer Field */
+
+	if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
+
+		/* NOTE: Slightly different operands for this opcode */
+
+		status =
+		    acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
+					      walk_state->operands[0],
+					      walk_state->operands[1],
+					      walk_state->operands[2],
+					      walk_state->operands[3]);
+	} else {
+		/* All other, create_xxx_field opcodes */
+
+		status =
+		    acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
+					      walk_state->operands[0],
+					      walk_state->operands[1], NULL,
+					      walk_state->operands[2]);
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_region_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid region Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get region address and length
+ *              Called from acpi_ds_exec_end_op during op_region parse tree walk
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
+			     union acpi_parse_object *op)
+{
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+	union acpi_operand_object *operand_desc;
+	struct acpi_namespace_node *node;
+	union acpi_parse_object *next_op;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
+
+	/*
+	 * This is where we evaluate the address and length fields of the
+	 * op_region declaration
+	 */
+	node = op->common.node;
+
+	/* next_op points to the op that holds the space_iD */
+
+	next_op = op->common.value.arg;
+
+	/* next_op points to address op */
+
+	next_op = next_op->common.next;
+
+	/* Evaluate/create the address and length operands */
+
+	status = acpi_ds_create_operands(walk_state, next_op);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Resolve the length and address operands to numbers */
+
+	status = acpi_ex_resolve_operands(op->common.aml_opcode,
+					  ACPI_WALK_OPERANDS, walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	obj_desc = acpi_ns_get_attached_object(node);
+	if (!obj_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	/*
+	 * Get the length operand and save it
+	 * (at Top of stack)
+	 */
+	operand_desc = walk_state->operands[walk_state->num_operands - 1];
+
+	obj_desc->region.length = (u32) operand_desc->integer.value;
+	acpi_ut_remove_reference(operand_desc);
+
+	/*
+	 * Get the address and save it
+	 * (at top of stack - 1)
+	 */
+	operand_desc = walk_state->operands[walk_state->num_operands - 2];
+
+	obj_desc->region.address = (acpi_physical_address)
+	    operand_desc->integer.value;
+	acpi_ut_remove_reference(operand_desc);
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
+			  obj_desc,
+			  ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
+			  obj_desc->region.length));
+
+	/* Now the address and length are valid for this opregion */
+
+	obj_desc->region.flags |= AOPOBJ_DATA_VALID;
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_table_region_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid region Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get region address and length
+ *              Called from acpi_ds_exec_end_op during data_table_region parse tree walk
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
+				   union acpi_parse_object *op)
+{
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+	union acpi_operand_object **operand;
+	struct acpi_namespace_node *node;
+	union acpi_parse_object *next_op;
+	u32 table_index;
+	struct acpi_table_header *table;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op);
+
+	/*
+	 * This is where we evaluate the signature_string and oem_iDString
+	 * and oem_table_iDString of the data_table_region declaration
+	 */
+	node = op->common.node;
+
+	/* next_op points to signature_string op */
+
+	next_op = op->common.value.arg;
+
+	/*
+	 * Evaluate/create the signature_string and oem_iDString
+	 * and oem_table_iDString operands
+	 */
+	status = acpi_ds_create_operands(walk_state, next_op);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/*
+	 * Resolve the signature_string and oem_iDString
+	 * and oem_table_iDString operands
+	 */
+	status = acpi_ex_resolve_operands(op->common.aml_opcode,
+					  ACPI_WALK_OPERANDS, walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	operand = &walk_state->operands[0];
+
+	/* Find the ACPI table */
+
+	status = acpi_tb_find_table(operand[0]->string.pointer,
+				    operand[1]->string.pointer,
+				    operand[2]->string.pointer, &table_index);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	acpi_ut_remove_reference(operand[0]);
+	acpi_ut_remove_reference(operand[1]);
+	acpi_ut_remove_reference(operand[2]);
+
+	status = acpi_get_table_by_index(table_index, &table);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	obj_desc = acpi_ns_get_attached_object(node);
+	if (!obj_desc) {
+		return_ACPI_STATUS(AE_NOT_EXIST);
+	}
+
+	obj_desc->region.address =
+	    (acpi_physical_address) ACPI_TO_INTEGER(table);
+	obj_desc->region.length = table->length;
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
+			  obj_desc,
+			  ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
+			  obj_desc->region.length));
+
+	/* Now the address and length are valid for this opregion */
+
+	obj_desc->region.flags |= AOPOBJ_DATA_VALID;
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_data_object_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid data_object Op object
+ *              obj_desc        - data_object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get the operands and complete the following data object types:
+ *              Buffer, Package.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
+				  union acpi_parse_object *op,
+				  union acpi_operand_object *obj_desc)
+{
+	acpi_status status;
+	union acpi_operand_object *arg_desc;
+	u32 length;
+
+	ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
+
+	/* The first operand (for all of these data objects) is the length */
+
+	/*
+	 * Set proper index into operand stack for acpi_ds_obj_stack_push
+	 * invoked inside acpi_ds_create_operand.
+	 */
+	walk_state->operand_index = walk_state->num_operands;
+
+	status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	status = acpi_ex_resolve_operands(walk_state->opcode,
+					  &(walk_state->
+					    operands[walk_state->num_operands -
+						     1]), walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	/* Extract length operand */
+
+	arg_desc = walk_state->operands[walk_state->num_operands - 1];
+	length = (u32) arg_desc->integer.value;
+
+	/* Cleanup for length operand */
+
+	status = acpi_ds_obj_stack_pop(1, walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	acpi_ut_remove_reference(arg_desc);
+
+	/*
+	 * Create the actual data object
+	 */
+	switch (op->common.aml_opcode) {
+	case AML_BUFFER_OP:
+
+		status =
+		    acpi_ds_build_internal_buffer_obj(walk_state, op, length,
+						      &obj_desc);
+		break;
+
+	case AML_PACKAGE_OP:
+	case AML_VAR_PACKAGE_OP:
+
+		status =
+		    acpi_ds_build_internal_package_obj(walk_state, op, length,
+						       &obj_desc);
+		break;
+
+	default:
+		return_ACPI_STATUS(AE_AML_BAD_OPCODE);
+	}
+
+	if (ACPI_SUCCESS(status)) {
+		/*
+		 * Return the object in the walk_state, unless the parent is a package -
+		 * in this case, the return object will be stored in the parse tree
+		 * for the package.
+		 */
+		if ((!op->common.parent) ||
+		    ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
+		     (op->common.parent->common.aml_opcode !=
+		      AML_VAR_PACKAGE_OP)
+		     && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
+			walk_state->result_obj = obj_desc;
+		}
+	}
+
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_eval_bank_field_operands
+ *
+ * PARAMETERS:  walk_state      - Current walk
+ *              Op              - A valid bank_field Op object
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Get bank_field bank_value
+ *              Called from acpi_ds_exec_end_op during bank_field parse tree walk
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state,
+				 union acpi_parse_object *op)
+{
+	acpi_status status;
+	union acpi_operand_object *obj_desc;
+	union acpi_operand_object *operand_desc;
+	struct acpi_namespace_node *node;
+	union acpi_parse_object *next_op;
+	union acpi_parse_object *arg;
+
+	ACPI_FUNCTION_TRACE_PTR(ds_eval_bank_field_operands, op);
+
+	/*
+	 * This is where we evaluate the bank_value field of the
+	 * bank_field declaration
+	 */
+
+	/* next_op points to the op that holds the Region */
+
+	next_op = op->common.value.arg;
+
+	/* next_op points to the op that holds the Bank Register */
+
+	next_op = next_op->common.next;
+
+	/* next_op points to the op that holds the Bank Value */
+
+	next_op = next_op->common.next;
+
+	/*
+	 * Set proper index into operand stack for acpi_ds_obj_stack_push
+	 * invoked inside acpi_ds_create_operand.
+	 *
+	 * We use walk_state->Operands[0] to store the evaluated bank_value
+	 */
+	walk_state->operand_index = 0;
+
+	status = acpi_ds_create_operand(walk_state, next_op, 0);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	status = acpi_ex_resolve_to_value(&walk_state->operands[0], walk_state);
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
+	ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS,
+			   acpi_ps_get_opcode_name(op->common.aml_opcode), 1);
+	/*
+	 * Get the bank_value operand and save it
+	 * (at Top of stack)
+	 */
+	operand_desc = walk_state->operands[0];
+
+	/* Arg points to the start Bank Field */
+
+	arg = acpi_ps_get_arg(op, 4);
+	while (arg) {
+
+		/* Ignore OFFSET and ACCESSAS terms here */
+
+		if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
+			node = arg->common.node;
+
+			obj_desc = acpi_ns_get_attached_object(node);
+			if (!obj_desc) {
+				return_ACPI_STATUS(AE_NOT_EXIST);
+			}
+
+			obj_desc->bank_field.value =
+			    (u32) operand_desc->integer.value;
+		}
+
+		/* Move to next field in the list */
+
+		arg = arg->common.next;
+	}
+
+	acpi_ut_remove_reference(operand_desc);
+	return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_exec_begin_control_op
+ *
+ * PARAMETERS:  walk_list       - The list that owns the walk stack
+ *              Op              - The control Op
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Handles all control ops encountered during control method
+ *              execution.
+ *
+ **********************