Merge tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull a few more MIPS updates from Paul Burton:
 "Some SGI IP27 specific PCI rework and a batch of fixes:

   - A build fix for BMIPS5000 configurations with
     CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery.

   - A fix to report supported ISAs correctly on older Ingenic SoCs
     which incorrectly indicate MIPSr2 support in their cop0 Config
     register.

   - Some PCI modernization for SGI IP27 systems as part of ongoing work
     to support some other SGI systems.

   - A fix allowing use of appended DTB files with generic kernels.

   - DMA mask fixes for SGI IP22 & Alchemy systems"

* tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: add DMA masks for on-chip ethernet
  MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask
  generic: fix appended dtb support
  MIPS: SGI-IP27: abstract chipset irq from bridge
  MIPS: SGI-IP27: use generic PCI driver
  MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA
  MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled

17 files changed, 809 insertions, 659 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 677e5bfeff47..70d3200476bf 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -674,7 +674,10 @@ config SGI_IP27
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_PCI
 	select IRQ_MIPS_CPU
+	select IRQ_DOMAIN_HIERARCHY
 	select NR_CPUS_DEFAULT_64
+	select PCI_DRIVERS_GENERIC
+	select PCI_XTALK_BRIDGE
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1241,6 +1244,9 @@ config IRQ_GT641XX
 config PCI_GT64XXX_PCI0
 	bool
 
+config PCI_XTALK_BRIDGE
+	bool
+
 config NO_EXCEPT_FILL
 	bool
 
diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
index 1454d9f6ab2d..b8f3397c59c9 100644
--- a/arch/mips/alchemy/common/platform.c
+++ b/arch/mips/alchemy/common/platform.c
@@ -131,9 +131,7 @@ static void __init alchemy_setup_uarts(int ctype)
 }
 
 
-/* The dmamask must be set for OHCI/EHCI to work */
-static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32);
-static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32);
+static u64 alchemy_all_dmamask = DMA_BIT_MASK(32);
 
 /* Power on callback for the ehci platform driver */
 static int alchemy_ehci_power_on(struct platform_device *pdev)
@@ -231,7 +229,7 @@ static void __init alchemy_setup_usb(int ctype)
 	res[1].flags = IORESOURCE_IRQ;
 	pdev->name = "ohci-platform";
 	pdev->id = 0;
-	pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+	pdev->dev.dma_mask = &alchemy_all_dmamask;
 	pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 	if (platform_device_register(pdev))
@@ -251,7 +249,7 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].flags = IORESOURCE_IRQ;
 		pdev->name = "ehci-platform";
 		pdev->id = 0;
-		pdev->dev.dma_mask = &alchemy_ehci_dmamask;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
 		pdev->dev.platform_data = &alchemy_ehci_pdata;
 
 		if (platform_device_register(pdev))
@@ -271,7 +269,7 @@ static void __init alchemy_setup_usb(int ctype)
 		res[1].flags = IORESOURCE_IRQ;
 		pdev->name = "ohci-platform";
 		pdev->id = 1;
-		pdev->dev.dma_mask = &alchemy_ohci_dmamask;
+		pdev->dev.dma_mask = &alchemy_all_dmamask;
 		pdev->dev.platform_data = &alchemy_ohci_pdata;
 
 		if (platform_device_register(pdev))
@@ -338,7 +336,11 @@ static struct platform_device au1xxx_eth0_device = {
 	.name		= "au1000-eth",
 	.id		= 0,
 	.num_resources	= MAC_RES_COUNT,
-	.dev.platform_data = &au1xxx_eth0_platform_data,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth0_platform_data,
+	},
 };
 
 static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = {
@@ -370,7 +372,11 @@ static struct platform_device au1xxx_eth1_device = {
 	.name		= "au1000-eth",
 	.id		= 1,
 	.num_resources	= MAC_RES_COUNT,
-	.dev.platform_data = &au1xxx_eth1_platform_data,
+	.dev = {
+		.dma_mask               = &alchemy_all_dmamask,
+		.coherent_dma_mask      = DMA_BIT_MASK(32),
+		.platform_data          = &au1xxx_eth1_platform_data,
+	},
 };
 
 void __init au1xxx_override_eth_cfg(unsigned int port,
diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c
index a106f8113842..a84475f1924f 100644
--- a/arch/mips/generic/init.c
+++ b/arch/mips/generic/init.c
@@ -43,14 +43,14 @@ void __init *plat_get_fdt(void)
 		/* Already set up */
 		return (void *)fdt;
 
-	if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
+	if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_passed_dtb)) {
 		/*
 		 * We booted using the UHI boot protocol, so we have been
 		 * provided with the appropriate device tree for the board.
 		 * Make use of it & search for any machine struct based upon
 		 * the root compatible string.
 		 */
-		fdt = (void *)fw_arg1;
+		fdt = (void *)fw_passed_dtb;
 
 		for_each_mips_machine(check_mach) {
 			match = mips_machine_is_compatible(check_mach, fdt);
diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h
index 42ea1313626c..965f0793a5f9 100644
--- a/arch/mips/include/asm/mach-ip27/topology.h
+++ b/arch/mips/include/asm/mach-ip27/topology.h
@@ -7,18 +7,9 @@
 #include <asm/mmzone.h>
 
 struct cpuinfo_ip27 {
-//	cpuid_t		p_cpuid;	/* PROM assigned cpuid */
 	cnodeid_t	p_nodeid;	/* my node ID in compact-id-space */
 	nasid_t		p_nasid;	/* my node ID in numa-as-id-space */
 	unsigned char	p_slice;	/* Physical position on node board */
-#if 0
-	unsigned long		loops_per_sec;
-	unsigned long		ipi_count;
-	unsigned long		irq_attempt[NR_IRQS];
-	unsigned long		smp_local_irq_count;
-	unsigned long		prof_multiplier;
-	unsigned long		prof_counter;
-#endif
 };
 
 extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
@@ -30,7 +21,7 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);
 
-#define cpumask_of_pcibus(bus)	(cpu_online_mask)
+#define cpumask_of_pcibus(bus)	(cpumask_of_node(pcibus_to_node(bus)))
 
 extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
 
diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h
index 23574c27eb40..a92cd30b48c9 100644
--- a/arch/mips/include/asm/pci/bridge.h
+++ b/arch/mips/include/asm/pci/bridge.h
@@ -801,15 +801,13 @@ struct bridge_err_cmdword {
 #define PCI64_ATTR_RMF_SHFT	48
 
 struct bridge_controller {
-	struct pci_controller	pc;
-	struct resource		mem;
-	struct resource		io;
 	struct resource		busn;
 	struct bridge_regs	*base;
-	nasid_t			nasid;
-	unsigned int		widget_id;
-	u64			baddr;
+	unsigned long		baddr;
+	unsigned long		intr_addr;
+	struct irq_domain	*domain;
 	unsigned int		pci_int[8];
+	nasid_t			nasid;
 };
 
 #define BRIDGE_CONTROLLER(bus) \
@@ -822,8 +820,4 @@ struct bridge_controller {
 #define bridge_clr(bc, reg, val)	\
 	__raw_writel(__raw_readl(&bc->base->reg) & ~(val), &bc->base->reg)
 
-extern int request_bridge_irq(struct bridge_controller *bc, int pin);
-
-extern struct pci_ops bridge_pci_ops;
-
 #endif /* _ASM_PCI_BRIDGE_H */
diff --git a/arch/mips/include/asm/sn/irq_alloc.h b/arch/mips/include/asm/sn/irq_alloc.h
new file mode 100644
index 000000000000..09b89cecff56
--- /dev/null
+++ b/arch/mips/include/asm/sn/irq_alloc.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_SN_IRQ_ALLOC_H
+#define __ASM_SN_IRQ_ALLOC_H
+
+struct irq_alloc_info {
+	void *ctrl;
+	nasid_t nasid;
+	int pin;
+};
+
+#endif /* __ASM_SN_IRQ_ALLOC_H */
diff --git a/arch/mips/include/asm/xtalk/xtalk.h b/arch/mips/include/asm/xtalk/xtalk.h
index 26d2ed1fa917..680e7efebbaf 100644
--- a/arch/mips/include/asm/xtalk/xtalk.h
+++ b/arch/mips/include/asm/xtalk/xtalk.h
@@ -47,15 +47,6 @@ typedef struct xtalk_piomap_s *xtalk_piomap_t;
 #define XIO_PORT(x)	((xwidgetnum_t)(((x)&XIO_PORT_BITS) >> XIO_PORT_SHIFT))
 #define XIO_PACK(p, o)	((((uint64_t)(p))<<XIO_PORT_SHIFT) | ((o)&XIO_ADDR_BITS))
 
-#ifdef CONFIG_PCI
-extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
-#else
-static inline int bridge_probe(nasid_t nasid, int widget, int masterwid)
-{
-	return 0;
-}
-#endif
-
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_XTALK_XTALK_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index d5e335e6846a..6126b77d5a62 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -1973,6 +1973,14 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 		panic("Unknown Ingenic Processor ID!");
 		break;
 	}
+
+	/*
+	 * The config0 register in the Xburst CPUs with a processor ID of
+	 * PRID_COMP_INGENIC_D0 report themselves as MIPS32r2 compatible,
+	 * but they don't actually support this ISA.
+	 */
+	if ((c->processor_id & PRID_COMP_MASK) == PRID_COMP_INGENIC_D0)
+		c->isa_level &= ~MIPS_CPU_ISA_M32R2;
 }
 
 static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c
index 413863508f6f..d67fb64e908c 100644
--- a/arch/mips/kernel/perf_event_mipsxx.c
+++ b/arch/mips/kernel/perf_event_mipsxx.c
@@ -64,17 +64,11 @@ struct mips_perf_event {
 	#define CNTR_EVEN	0x55555555
 	#define CNTR_ODD	0xaaaaaaaa
 	#define CNTR_ALL	0xffffffff
-#ifdef CONFIG_MIPS_MT_SMP
 	enum {
 		T  = 0,
 		V  = 1,
 		P  = 2,
 	} range;
-#else
-	#define T
-	#define V
-	#define P
-#endif
 };
 
 static struct mips_perf_event raw_event;
@@ -325,9 +319,7 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 {
 	struct perf_event *event = container_of(evt, struct perf_event, hw);
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-#ifdef CONFIG_MIPS_MT_SMP
 	unsigned int range = evt->event_base >> 24;
-#endif /* CONFIG_MIPS_MT_SMP */
 
 	WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
 
@@ -336,21 +328,15 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 		/* Make sure interrupt enabled. */
 		MIPS_PERFCTRL_IE;
 
-#ifdef CONFIG_CPU_BMIPS5000
-	{
+	if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) {
 		/* enable the counter for the calling thread */
 		cpuc->saved_ctrl[idx] |=
 			(1 << (12 + vpe_id())) | BRCM_PERFCTRL_TC;
-	}
-#else
-#ifdef CONFIG_MIPS_MT_SMP
-	if (range > V) {
+	} else if (IS_ENABLED(CONFIG_MIPS_MT_SMP) && range > V) {
 		/* The counter is processor wide. Set it up to count all TCs. */
 		pr_debug("Enabling perf counter for all TCs\n");
 		cpuc->saved_ctrl[idx] |= M_TC_EN_ALL;
-	} else
-#endif /* CONFIG_MIPS_MT_SMP */
-	{
+	} else {
 		unsigned int cpu, ctrl;
 
 		/*
@@ -365,7 +351,6 @@ static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
 		cpuc->saved_ctrl[idx] |= ctrl;
 		pr_debug("Enabling perf counter for CPU%d\n", cpu);
 	}
-#endif /* CONFIG_CPU_BMIPS5000 */
 	/*
 	 * We do not actually let the counter run. Leave it until start().
 	 */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c4f976593061..d6de4cb2e31c 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_PCI_AR2315)	+= pci-ar2315.o
 obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
 obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
 obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
+obj-$(CONFIG_PCI_XTALK_BRIDGE)	+= pci-xtalk-bridge.o
 #
 # These are still pretty much in the old state, watch, go blind.
 #
@@ -39,7 +40,7 @@ obj-$(CONFIG_MIPS_MALTA)	+= fixup-malta.o pci-malta.o
 obj-$(CONFIG_PMC_MSP7120_GW)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_EVAL)	+= fixup-pmcmsp.o ops-pmcmsp.o
 obj-$(CONFIG_PMC_MSP7120_FPGA)	+= fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_SGI_IP27)		+= ops-bridge.o pci-ip27.o
+obj-$(CONFIG_SGI_IP27)		+= pci-ip27.o
 obj-$(CONFIG_SGI_IP32)		+= fixup-ip32.o ops-mace.o pci-ip32.o
 obj-$(CONFIG_SIBYTE_SB1250)	+= fixup-sb1250.o pci-sb1250.o
 obj-$(CONFIG_SIBYTE_BCM112X)	+= fixup-sb1250.o pci-sb1250.o
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
deleted file mode 100644
index df95b0da08f2..000000000000
--- a/arch/mips/pci/ops-bridge.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999, 2000, 04, 06 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#include <linux/pci.h>
-#include <asm/paccess.h>
-#include <asm/pci/bridge.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Most of the IOC3 PCI config register aren't present
- * we emulate what is needed for a normal PCI enumeration
- */
-static u32 emulate_ioc3_cfg(int where, int size)
-{
-	if (size == 1 && where == 0x3d)
-		return 0x01;
-	else if (size == 2 && where == 0x3c)
-		return 0x0100;
-	else if (size == 4 && where == 0x3c)
-		return 0x00000100;
-
-	return 0;
-}
-
-/*
- * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
- * not really documented, so right now I can't write code which uses it.
- * Therefore we use type 0 accesses for now even though they won't work
- * correctly for PCI-to-PCI bridges.
- *
- * The function is complicated by the ultimate brokenness of the IOC3 chip
- * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
- * accesses and does only decode parts of it's address space.
- */
-
-static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 * value)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
-	struct bridge_regs *bridge = bc->base;
-	int slot = PCI_SLOT(devfn);
-	int fn = PCI_FUNC(devfn);
-	volatile void *addr;
-	u32 cf, shift, mask;
-	int res;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * IOC3 is broken beyond belief ...  Don't even give the
-	 * generic PCI code a chance to look at it for real ...
-	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
-
-	if (size == 1)
-		res = get_dbe(*value, (u8 *) addr);
-	else if (size == 2)
-		res = get_dbe(*value, (u16 *) addr);
-	else
-		res = get_dbe(*value, (u32 *) addr);
-
-	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-		*value = emulate_ioc3_cfg(where, size);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	*value = (cf >> shift) & mask;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
-				 int where, int size, u32 * value)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
-	struct bridge_regs *bridge = bc->base;
-	int busno = bus->number;
-	int slot = PCI_SLOT(devfn);
-	int fn = PCI_FUNC(devfn);
-	volatile void *addr;
-	u32 cf, shift, mask;
-	int res;
-
-	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
-	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * IOC3 is broken beyond belief ...  Don't even give the
-	 * generic PCI code a chance to look at it for real ...
-	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
-
-	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
-	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
-
-	if (size == 1)
-		res = get_dbe(*value, (u8 *) addr);
-	else if (size == 2)
-		res = get_dbe(*value, (u16 *) addr);
-	else
-		res = get_dbe(*value, (u32 *) addr);
-
-	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
-		*value = emulate_ioc3_cfg(where, size);
-		return PCIBIOS_SUCCESSFUL;
-	}
-
-	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
-	addr = &bridge->b_type1_cfg.c[(fn << 8) | where];
-
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	*value = (cf >> shift) & mask;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
-			   int where, int size, u32 * value)
-{
-	if (!pci_is_root_bus(bus))
-		return pci_conf1_read_config(bus, devfn, where, size, value);
-
-	return pci_conf0_read_config(bus, devfn, where, size, value);
-}
-
-static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
-				  int where, int size, u32 value)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
-	struct bridge_regs *bridge = bc->base;
-	int slot = PCI_SLOT(devfn);
-	int fn = PCI_FUNC(devfn);
-	volatile void *addr;
-	u32 cf, shift, mask, smask;
-	int res;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * IOC3 is broken beyond belief ...  Don't even give the
-	 * generic PCI code a chance to look at it for real ...
-	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
-
-	if (size == 1) {
-		res = put_dbe(value, (u8 *) addr);
-	} else if (size == 2) {
-		res = put_dbe(value, (u16 *) addr);
-	} else {
-		res = put_dbe(value, (u32 *) addr);
-	}
-
-	if (res)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
-		return PCIBIOS_SUCCESSFUL;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	smask = mask << shift;
-
-	cf = (cf & ~smask) | ((value & mask) << shift);
-	if (put_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
-				  int where, int size, u32 value)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
-	struct bridge_regs *bridge = bc->base;
-	int slot = PCI_SLOT(devfn);
-	int fn = PCI_FUNC(devfn);
-	int busno = bus->number;
-	volatile void *addr;
-	u32 cf, shift, mask, smask;
-	int res;
-
-	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
-	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * IOC3 is broken beyond belief ...  Don't even give the
-	 * generic PCI code a chance to look at it for real ...
-	 */
-	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16)))
-		goto is_ioc3;
-
-	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
-
-	if (size == 1) {
-		res = put_dbe(value, (u8 *) addr);
-	} else if (size == 2) {
-		res = put_dbe(value, (u16 *) addr);
-	} else {
-		res = put_dbe(value, (u32 *) addr);
-	}
-
-	if (res)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-
-is_ioc3:
-
-	/*
-	 * IOC3 special handling
-	 */
-	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
-		return PCIBIOS_SUCCESSFUL;
-
-	addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
-
-	if (get_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	shift = ((where & 3) << 3);
-	mask = (0xffffffffU >> ((4 - size) << 3));
-	smask = mask << shift;
-
-	cf = (cf & ~smask) | ((value & mask) << shift);
-	if (put_dbe(cf, (u32 *) addr))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
-	int where, int size, u32 value)
-{
-	if (!pci_is_root_bus(bus))
-		return pci_conf1_write_config(bus, devfn, where, size, value);
-
-	return pci_conf0_write_config(bus, devfn, where, size, value);
-}
-
-struct pci_ops bridge_pci_ops = {
-	.read	= pci_read_config,
-	.write	= pci_write_config,
-};
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 3c177b4d0609..441eb9383b20 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -7,162 +7,7 @@
  * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  */
-#include <linux/kernel.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/dma-direct.h>
-#include <asm/sn/arch.h>
 #include <asm/pci/bridge.h>
-#include <asm/paccess.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/sn0/hub.h>
-
-/*
- * Max #PCI busses we can handle; ie, max #PCI bridges.
- */
-#define MAX_PCI_BUSSES		40
-
-/*
- * XXX: No kmalloc available when we do our crosstalk scan,
- *	we should try to move it later in the boot process.
- */
-static struct bridge_controller bridges[MAX_PCI_BUSSES];
-
-extern struct pci_ops bridge_pci_ops;
-
-int bridge_probe(nasid_t nasid, int widget_id, int masterwid)
-{
-	unsigned long offset = NODE_OFFSET(nasid);
-	struct bridge_controller *bc;
-	static int num_bridges = 0;
-	int slot;
-
-	pci_set_flags(PCI_PROBE_ONLY);
-
-	printk("a bridge\n");
-
-	/* XXX: kludge alert.. */
-	if (!num_bridges)
-		ioport_resource.end = ~0UL;
-
-	bc = &bridges[num_bridges];
-
-	bc->pc.pci_ops		= &bridge_pci_ops;
-	bc->pc.mem_resource	= &bc->mem;
-	bc->pc.io_resource	= &bc->io;
-
-	bc->pc.index		= num_bridges;
-
-	bc->mem.name		= "Bridge PCI MEM";
-	bc->pc.mem_offset	= offset;
-	bc->mem.start		= 0;
-	bc->mem.end		= ~0UL;
-	bc->mem.flags		= IORESOURCE_MEM;
-
-	bc->io.name		= "Bridge IO MEM";
-	bc->pc.io_offset	= offset;
-	bc->io.start		= 0UL;
-	bc->io.end		= ~0UL;
-	bc->io.flags		= IORESOURCE_IO;
-
-	bc->widget_id = widget_id;
-	bc->nasid = nasid;
-
-	bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR;
-
-	/*
-	 * point to this bridge
-	 */
-	bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id);
-
-	/*
-	 * Clear all pending interrupts.
-	 */
-	bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
-
-	/*
-	 * Until otherwise set up, assume all interrupts are from slot 0
-	 */
-	bridge_write(bc, b_int_device, 0x0);
-
-	/*
-	 * swap pio's to pci mem and io space (big windows)
-	 */
-	bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP |
-				      BRIDGE_CTRL_MEM_SWAP);
-#ifdef CONFIG_PAGE_SIZE_4KB
-	bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#else /* 16kB or larger */
-	bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
-#endif
-
-	/*
-	 * Hmm...  IRIX sets additional bits in the address which
-	 * are documented as reserved in the bridge docs.
-	 */
-	bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16));
-	bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/
-	bridge_write(bc, b_dir_map, (masterwid << 20));	/* DMA */
-	bridge_write(bc, b_int_enable, 0);
-
-	for (slot = 0; slot < 8; slot ++) {
-		bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
-		bc->pci_int[slot] = -1;
-	}
-	bridge_read(bc, b_wid_tflush);	  /* wait until Bridge PIO complete */
-
-	register_pci_controller(&bc->pc);
-
-	num_bridges++;
-
-	return 0;
-}
-
-/*
- * All observed requests have pin == 1. We could have a global here, that
- * gets incremented and returned every time - unfortunately, pci_map_irq
- * may be called on the same device over and over, and need to return the
- * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
- *
- * A given PCI device, in general, should be able to intr any of the cpus
- * on any one of the hubs connected to its xbow.
- */
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return 0;
-}
-
-static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev)
-{
-	while (dev->bus->parent) {
-		/* Move up the chain of bridges. */
-		dev = dev->bus->self;
-	}
-
-	return dev;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	struct pci_dev *rdev = bridge_root_dev(dev);
-	int slot = PCI_SLOT(rdev->devfn);
-	int irq;
-
-	irq = bc->pci_int[slot];
-	if (irq == -1) {
-		irq = request_bridge_irq(bc, slot);
-		if (irq < 0)
-			return irq;
-
-		bc->pci_int[slot] = irq;
-	}
-	dev->irq = irq;
-
-	return 0;
-}
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
@@ -177,29 +22,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
 	return dma_addr & ~(0xffUL << 56);
 }
 
-/*
- * Device might live on a subordinate PCI bus.	XXX Walk up the chain of buses
- * to find the slot number in sense of the bridge device register.
- * XXX This also means multiple devices might rely on conflicting bridge
- * settings.
- */
-
-static inline void pci_disable_swapping(struct pci_dev *dev)
-{
-	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
-	struct bridge_regs *bridge = bc->base;
-	int slot = PCI_SLOT(dev->devfn);
-
-	/* Turn off byte swapping */
-	bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR;
-	bridge->b_widget.w_tflush;	/* Flush */
-}
-
-static void pci_fixup_ioc3(struct pci_dev *d)
-{
-	pci_disable_swapping(d);
-}
-
 #ifdef CONFIG_NUMA
 int pcibus_to_node(struct pci_bus *bus)
 {
@@ -209,6 +31,3 @@ int pcibus_to_node(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pcibus_to_node);
 #endif /* CONFIG_NUMA */
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
-	pci_fixup_ioc3);
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
new file mode 100644
index 000000000000..bcf7f559789a
--- /dev/null
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
+ * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/dma-direct.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/xtalk-bridge.h>
+
+#include <asm/pci/bridge.h>
+#include <asm/paccess.h>
+#include <asm/sn/irq_alloc.h>
+
+/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+	if (size == 1 && where == 0x3d)
+		return 0x01;
+	else if (size == 2 && where == 0x3c)
+		return 0x0100;
+	else if (size == 4 && where == 0x3c)
+		return 0x00000100;
+
+	return 0;
+}
+
+static void bridge_disable_swapping(struct pci_dev *dev)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
+	int slot = PCI_SLOT(dev->devfn);
+
+	/* Turn off byte swapping */
+	bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
+	bridge_read(bc, b_widget.w_tflush);	/* Flush */
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
+	bridge_disable_swapping);
+
+
+/*
+ * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
+ * not really documented, so right now I can't write code which uses it.
+ * Therefore we use type 0 accesses for now even though they won't work
+ * correctly for PCI-to-PCI bridges.
+ *
+ * The function is complicated by the ultimate brokenness of the IOC3 chip
+ * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
+ * accesses and does only decode parts of it's address space.
+ */
+static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
+				 int where, int size, u32 *value)
+{
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct bridge_regs *bridge = bc->base;
+	int slot = PCI_SLOT(devfn);
+	int fn = PCI_FUNC(devfn);
+	void *addr;
+	u32 cf, shift, mask;
+	int res;
+
+	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
+	if (get_dbe(cf, (u32 *)addr))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * IOC3 is broken beyond belief ...  Don't even give the
+	 * generic PCI