Merge tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull non-critical ARM SoC bug fixes from Arnd Bergmann:
 "Bug fixes that did not make it into v3.8, mostly because they were not
  considered important enough, and in some cases because bugs only show
  up in combination with other patches destined for 3.9.  This includes
  a few larger patches for GPIO on the Marvell PXA platform and a lot of
  Samsung specific bug fixes, as well as a series from Arnd to fix older
  build warnings."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  ARM: SPEAr13xx: Enable CONFIG_ARCH_HAS_CPUFREQ
  ARM: imx: MACH_MX31ADS_WM1133_EV1 needs REGULATOR_WM8350
  scripts/sortextable: silence script output
  ARM: s3c: i2c: add platform_device forward declaration
  ARM: mvebu: allow selecting mvebu without Armada XP
  ARM: pick Versatile by default for !MMU
  ARM: integrator: fix build with INTEGRATOR_AP off
  ARM: integrator/versatile: fix NOMMU warnings
  ARM: sa1100: don't warn about mach/ide.h
  ARM: shmobile: fix defconfig warning on CONFIG_USB
  ARM: w90x900: fix legacy assembly syntax
  ARM: samsung: fix assembly syntax for new gas
  ARM: disable virt_to_bus/virt_to_bus almost everywhere
  ARM: dts: Correct pin configuration of SD 4 for exynos4x12-pinctrl
  ARM: SAMSUNG: Silence empty switch warning in fimc-core.h
  ARM: SAMSUNG: Silence empty switch warning in sdhci.h
  ARM: msm: proc_comm_boot_wait should not be __init
  arm: vt8500: Update MAINTAINERS entry for arch-vt8500
  ARM: integrator: ensure ap_syscon_base is initialised when !CONFIG_MMU
  ARM: S5PV210: Fix early uart output in fifo mode
  ...

64 files changed, 221 insertions, 136 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f410cb16dd22..09238c83e6d6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -260,7 +260,8 @@ config MMU
 #
 choice
 	prompt "ARM system type"
-	default ARCH_MULTIPLATFORM
+	default ARCH_VERSATILE if !MMU
+	default ARCH_MULTIPLATFORM if MMU
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
@@ -1449,6 +1450,10 @@ config ISA_DMA
 	bool
 	select ISA_DMA_API
 
+config ARCH_NO_VIRT_TO_BUS
+	def_bool y
+	depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
+
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 80e29c605d4e..4801717566dd 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -324,8 +324,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
 				interrupts = <5 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -335,8 +333,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
 				interrupts = <6 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -346,8 +342,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
 				interrupts = <7 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
@@ -357,8 +351,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
 				interrupts = <8 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 8ecca6948d81..d112c3af8ce2 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -197,9 +197,9 @@
 				};
 
 				usart3 {
-					pinctrl_uart3: usart3-0 {
+					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							<2 22 0x2 0x1	/* PC22 periph B with pullup */
 							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};
 
@@ -402,8 +402,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
 				interrupts = <5 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				status = "disabled";
@@ -413,8 +411,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
 				interrupts = <6 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				status = "disabled";
@@ -424,8 +420,6 @@
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
 				interrupts = <7 4 5>;
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 42eac1ff3cc8..740630f9cd65 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -93,6 +93,7 @@
 			reg = <0xd0400 0x20>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <12>, <13>, <14>, <60>;
 		};
 
@@ -103,6 +104,7 @@
 			reg = <0xd0420 0x20>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <61>;
 		};
 
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index e31bfc4a6f09..2feffc70814c 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -48,13 +48,13 @@
 	};
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
 
@@ -66,7 +66,7 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,pinctrl-exynos4210";
+		compatible = "samsung,exynos4210-pinctrl";
 		reg = <0x03860000 0x1000>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 8e6115adcd97..099cec79e2ae 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -661,7 +661,7 @@
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
+			samsung,pin-function = <4>;
 			samsung,pin-pud = <4>;
 			samsung,pin-drv = <3>;
 		};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 179a62e46c9d..9a8780694909 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -37,13 +37,13 @@
 	};
 
 	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11400000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 
 	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x11000000 0x1000>;
 		interrupts = <0 46 0>;
 
@@ -55,14 +55,14 @@
 	};
 
 	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x03860000 0x1000>;
 		interrupt-parent = <&combiner>;
 		interrupts = <10 0>;
 	};
 
 	pinctrl_3: pinctrl@106E0000 {
-		compatible = "samsung,pinctrl-exynos4x12";
+		compatible = "samsung,exynos4x12-pinctrl";
 		reg = <0x106E0000 0x1000>;
 		interrupts = <0 72 0>;
 	};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 024269de8ee5..5f3562ad6746 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -86,7 +86,7 @@
 	};
 
 	pinctrl {
-		compatible = "samsung,pinctrl-exynos5440";
+		compatible = "samsung,exynos5440-pinctrl";
 		reg = <0xE0000 0x1000>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
@@ -154,6 +154,6 @@
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x130000 0x1000>;
-		interrupts = <0 16 0>, <0 17 0>;
+		interrupts = <0 17 0>, <0 16 0>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index d6265ca97119..ff1205ea5719 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -866,7 +866,7 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
-				clocks = <&clks 117>, <&clks 117>, <&clks 177>;
+				clocks = <&clks 117>, <&clks 117>, <&clks 190>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
index a3d37ec2655d..73187173117c 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts
@@ -70,7 +70,7 @@
 		compatible = "arm,sp805", "arm,primecell";
 		status = "disabled";
 		reg = <0 0x2b060000 0 0x1000>;
-		interrupts = <98>;
+		interrupts = <0 98 4>;
 		clocks = <&oscclk7>;
 		clock-names = "apb_pclk";
 	};
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index cf8071ad22d5..dfe371ec2749 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -72,7 +72,7 @@
 	wdt@2a490000 {
 		compatible = "arm,sp805", "arm,primecell";
 		reg = <0 0x2a490000 0 0x1000>;
-		interrupts = <98>;
+		interrupts = <0 98 4>;
 		clocks = <&oscclk6a>, <&oscclk6a>;
 		clock-names = "wdogclk", "apb_pclk";
 	};
diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig
index 728a43c446f8..afb17d630d44 100644
--- a/arch/arm/configs/marzen_defconfig
+++ b/arch/arm/configs/marzen_defconfig
@@ -83,7 +83,6 @@ CONFIG_USB=y
 CONFIG_USB_RCAR_PHY=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHI=y
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index b5bc96cb65a7..cbd91bce1ca9 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -33,6 +33,8 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_I2C=y
+CONFIG_I2C_MV64XXX=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index caa07db90cf5..e319b2c56f11 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -73,7 +73,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 231dca604737..426270fe080d 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -66,9 +66,9 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_AB8500_BM=y
-CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_AB8500_BM is not set
+# CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL is not set
 CONFIG_THERMAL=y
 CONFIG_CPU_THERMAL=y
 CONFIG_MFD_STMPE=y
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 5694a0d6576b..58b8c6a0ab1f 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -105,7 +105,7 @@ extern void set_dma_sg(unsigned int chan, struct scatterlist *sg, int nr_sg);
  */
 extern void __set_dma_addr(unsigned int chan, void *addr);
 #define set_dma_addr(chan, addr)				\
-	__set_dma_addr(chan, bus_to_virt(addr))
+	__set_dma_addr(chan, (void *)__bus_to_virt(addr))
 
 /* Set the DMA byte count for this channel
  *
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 64c770d24198..57870ab313c5 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -245,6 +245,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 #define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
+#ifdef CONFIG_VIRT_TO_BUS
 static inline __deprecated unsigned long virt_to_bus(void *x)
 {
 	return __virt_to_bus((unsigned long)x);
@@ -254,6 +255,7 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 {
 	return (void *)__bus_to_virt(x);
 }
+#endif
 
 /*
  * Conversion between a struct page and a physical address.
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 1a89824a5f78..0c7e3ad7ba93 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -299,6 +299,7 @@ void exynos4_restart(char mode, const char *cmd)
 
 void exynos5_restart(char mode, const char *cmd)
 {
+	struct device_node *np;
 	u32 val;
 	void __iomem *addr;
 
@@ -306,8 +307,9 @@ void exynos5_restart(char mode, const char *cmd)
 		val = 0x1;
 		addr = EXYNOS_SWRESET;
 	} else if (of_machine_is_compatible("samsung,exynos5440")) {
-		val = (0x10 << 20) | (0x1 << 16);
-		addr = EXYNOS5440_SWRESET;
+		np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
+		addr = of_iomap(np, 0) + 0xcc;
+		val = (0xfff << 20) | (0x1 << 16);
 	} else {
 		pr_err("%s: cannot support non-DT\n", __func__);
 		return;
@@ -1031,8 +1033,8 @@ static int __init exynos_init_irq_eint(void)
 	 * interrupt support code here can be completely removed.
 	 */
 	static const struct of_device_id exynos_pinctrl_ids[] = {
-		{ .compatible = "samsung,pinctrl-exynos4210", },
-		{ .compatible = "samsung,pinctrl-exynos4x12", },
+		{ .compatible = "samsung,exynos4210-pinctrl", },
+		{ .compatible = "samsung,exynos4x12-pinctrl", },
 	};
 	struct device_node *pctrl_np, *wkup_np;
 	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index b9b539cac81e..5106ab83e593 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -91,8 +91,8 @@ static int exynos_cpu_suspend(unsigned long arg)
 	/* issue the standby signal into the pm unit. */
 	cpu_do_idle();
 
-	/* we should never get past here */
-	panic("sleep resumed to originator?");
+	pr_info("Failed to suspend the system\n");
+	return 1; /* Aborting suspend */
 }
 
 static void exynos_pm_prepare(void)
@@ -282,6 +282,8 @@ static void exynos_pm_resume(void)
 	if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
 		tmp |= S5P_CENTRAL_LOWPWR_CFG;
 		__raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+		/* clear the wakeup state register */
+		__raw_writel(0x0, S5P_WAKEUP_STAT);
 		/* No need to perform below restore code */
 		goto early_wakeup;
 	}
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0a2349dc7018..64b40a4615b5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -488,7 +488,7 @@ config MACH_MX31ADS_WM1133_EV1
 	bool "Support Wolfson Microelectronics 1133-EV1 module"
 	depends on MACH_MX31ADS
 	depends on MFD_WM8350_I2C
-	depends on REGULATOR_WM8350
+	depends on REGULATOR_WM8350 = y
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8352_CONFIG_MODE_0
 	help
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index 2c570cdaae7b..69858c78f40d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -224,6 +224,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate)
 
 	clk_prepare_enable(clk[emi_ahb]);
 
+	/* Clock source for gpt must be derived from AHB */
+	clk_set_parent(clk[per5_sel], clk[ahb]);
+
 	clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
 	clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
 
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 1ffe3b534e51..e30369a58e4e 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -228,9 +228,12 @@ int __init mx27_clocks_init(unsigned long fre