Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions from Arnd Bergmann:
 "These are device tree conversions for a number of platforms, with the
  intention of turning code from board files into device tree
  descriptions.  Notable changes are:

   - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c

   - nomadik bindings for all devices, removing the board files

   - bcm2835 bindings for mmc and i2c

   - tegra bindings for hdmi, keyboard, audio, as well as some updates

   - at91 bindings for hardware ecc and for devices on RM9200

   - mxs bindings for cfa100xx

   - sunxi support for Miniand Hackberry board"

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits)
  Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree"
  Revert "sunxi: a13-olinuxino: Add user LED to the device tree"
  clk: tegra: initialise parent of uart clocks
  ARM: tegra: remove clock-frequency properties from serial nodes
  clk: tegra: fix driver to match DT binding
  clk: tegra: local arrays should be static
  clk: tegra: Add missing spinlock for hclk and pclk
  clk: tegra: Implement locking for super clock
  clk: tegra: fix wrong clock index between se to sata_cold
  sunxi: a13-olinuxino: Add user LED to the device tree
  ARM: davinci: da850 DT: add support for machine reboot
  ARM: davinci: da850: add wdt DT node
  ARM: davinci: da850: add DT node for I2C0
  ARM: at91: at91sam9n12: add DT parameters to enable PMECC
  ARM: at91: at91sam9x5: add DT parameters to enable PMECC
  ARM: at91: add EMAC bindings to RM9200 DT
  ARM: at91: add SSC bindings to RM9200 DT
  ARM: at91: add MMC bindings to RM9200 DT
  ARM: at91: Animeo IP: enable watchdog support
  ARM: nomadik: fix OF compilation regression
  ...

49 files changed, 2631 insertions, 742 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c370c869beb..2cb9c35b14e7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -896,10 +896,12 @@ config ARCH_NOMADIK
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
+	select CLKSRC_NOMADIK_MTU
 	select COMMON_CLK
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
+	select USE_OF
 	select PINCTRL
 	select PINCTRL_STN8815
 	select SPARSE_IRQ
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 042f2111485b..411ab1614a0e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -96,11 +96,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-apf28dev.dtb \
 	imx28-apx4devkit.dtb \
 	imx28-cfa10036.dtb \
+	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
 	imx28-tx28.dtb
+dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
@@ -135,8 +137,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
 	spear320-hmi.dtb
 dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \
+	sun4i-a10-hackberry.dtb \
 	sun5i-a13-olinuxino.dtb
 dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+	tegra20-iris-512.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
 	tegra20-plutux.dtb \
@@ -145,6 +149,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
 	tegra20-trimslice.dtb \
 	tegra20-ventana.dtb \
 	tegra20-whistler.dtb \
+	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
 	tegra114-dalmore.dtb \
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 74d92cd29d87..5160210f74da 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -78,6 +78,10 @@
 					bus-width = <4>;
 				};
 			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 222047f1ece9..b0268a5f4b4e 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -29,6 +29,9 @@
 		gpio3 = &pioD;
 		tcb0 = &tcb0;
 		tcb1 = &tcb1;
+		ssc0 = &ssc0;
+		ssc1 = &ssc1;
+		ssc2 = &ssc2;
 	};
 	cpus {
 		cpu@0 {
@@ -88,6 +91,52 @@
 				interrupts = <20 4 0 21 4 0 22 4 0>;
 			};
 
+			mmc0: mmc@fffb4000 {
+				compatible = "atmel,hsmci";
+				reg = <0xfffb4000 0x4000>;
+				interrupts = <10 4 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ssc0: ssc@fffd0000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd0000 0x4000>;
+				interrupts = <14 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disable";
+			};
+
+			ssc1: ssc@fffd4000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd4000 0x4000>;
+				interrupts = <15 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+				status = "disable";
+			};
+
+			ssc2: ssc@fffd8000 {
+				compatible = "atmel,at91rm9200-ssc";
+				reg = <0xfffd8000 0x4000>;
+				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
+				status = "disable";
+			};
+
+			macb0: ethernet@fffbc000 {
+				compatible = "cdns,at91rm9200-emac", "cdns,emac";
+				reg = <0xfffbc000 0x4000>;
+				interrupts = <24 4 3>;
+				phy-mode = "rmii";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb_rmii>;
+				status = "disabled";
+			};
+
 			pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -207,6 +256,115 @@
 					};
 				};
 
+				macb {
+					pinctrl_macb_rmii: macb_rmii-0 {
+						atmel,pins =
+							<0 7 0x1 0x0	/* PA7 periph A */
+							 0 8 0x1 0x0	/* PA8 periph A */
+							 0 9 0x1 0x0	/* PA9 periph A */
+							 0 10 0x1 0x0	/* PA10 periph A */
+							 0 11 0x1 0x0	/* PA11 periph A */
+							 0 12 0x1 0x0	/* PA12 periph A */
+							 0 13 0x1 0x0	/* PA13 periph A */
+							 0 14 0x1 0x0	/* PA14 periph A */
+							 0 15 0x1 0x0	/* PA15 periph A */
+							 0 16 0x1 0x0>;	/* PA16 periph A */
+					};
+
+					pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
+						atmel,pins =
+							<1 12 0x2 0x0	/* PB12 periph B */
+							 1 13 0x2 0x0	/* PB13 periph B */
+							 1 14 0x2 0x0	/* PB14 periph B */
+							 1 15 0x2 0x0	/* PB15 periph B */
+							 1 16 0x2 0x0	/* PB16 periph B */
+							 1 17 0x2 0x0	/* PB17 periph B */
+							 1 18 0x2 0x0	/* PB18 periph B */
+							 1 19 0x2 0x0>;	/* PB19 periph B */
+					};
+				};
+
+				mmc0 {
+					pinctrl_mmc0_clk: mmc0_clk-0 {
+						atmel,pins =
+							<0 27 0x1 0x0>;	/* PA27 periph A */
+					};
+
+					pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
+						atmel,pins =
+							<0 28 0x1 0x1	/* PA28 periph A with pullup */
+							 0 29 0x1 0x1>;	/* PA29 periph A with pullup */
+					};
+
+					pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
+						atmel,pins =
+							<1 3 0x2 0x1	/* PB3 periph B with pullup */
+							 1 4 0x2 0x1	/* PB4 periph B with pullup */
+							 1 5 0x2 0x1>;	/* PB5 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
+						atmel,pins =
+							<0 8 0x2 0x1	/* PA8 periph B with pullup */
+							 0 9 0x2 0x1>;	/* PA9 periph B with pullup */
+					};
+
+					pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
+						atmel,pins =
+							<0 10 0x2 0x1	/* PA10 periph B with pullup */
+							 0 11 0x2 0x1	/* PA11 periph B with pullup */
+							 0 12 0x2 0x1>;	/* PA12 periph B with pullup */
+					};
+				};
+
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 0 0x1 0x0	/* PB0 periph A */
+							 1 1 0x1 0x0	/* PB1 periph A */
+							 1 2 0x1 0x0>;	/* PB2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 3 0x1 0x0	/* PB3 periph A */
+							 1 4 0x1 0x0	/* PB4 periph A */
+							 1 5 0x1 0x0>;	/* PB5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<1 6 0x1 0x0	/* PB6 periph A */
+							 1 7 0x1 0x0	/* PB7 periph A */
+							 1 8 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<1 9 0x1 0x0	/* PB9 periph A */
+							 1 10 0x1 0x0	/* PB10 periph A */
+							 1 11 0x1 0x0>;	/* PB11 periph A */
+					};
+				};
+
+				ssc2 {
+					pinctrl_ssc2_tx: ssc2_tx-0 {
+						atmel,pins =
+							<1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0	/* PB13 periph A */
+							 1 14 0x1 0x0>;	/* PB14 periph A */
+					};
+
+					pinctrl_ssc2_rx: ssc2_rx-0 {
+						atmel,pins =
+							<1 15 0x1 0x0	/* PB15 periph A */
+							 1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0>;	/* PB17 periph A */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8aa48931e0a2..e586d85f8e23 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -44,6 +44,11 @@
 				status = "okay";
 			};
 
+			macb0: ethernet@fffbc000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
 			usb1: gadget@fffb0000 {
 				atmel,vbus-gpio = <&pioD 4 0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 4801717566dd..7750f98dd764 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -382,8 +382,9 @@
 			reg = < 0x40000000 0x10000000
 				0xffffe000 0x00000600
 				0xffffe600 0x00000200
-				0x00100000 0x00100000
+				0x00108000 0x00018000
 			       >;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 0376bf4fd66b..d400f8de4387 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -71,7 +71,10 @@
 
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <2>;
+			atmel,pmecc-sector-size = <512>;
 			nand-on-flash-bbt;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index d112c3af8ce2..aa98e641931f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -512,7 +512,11 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x40000000 0x10000000
+			       0xffffe000 0x600		/* PMECC Registers */
+			       0xffffe600 0x200		/* PMECC Error Location Registers */
+			       0x00108000 0x18000	/* PMECC looup table in ROM code  */
 			      >;
+			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
 			atmel,nand-addr-offset = <21>;
 			atmel,nand-cmd-offset = <22>;
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 31e7be23703d..4027ac7e4502 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -26,7 +26,10 @@
 	ahb {
 		nand0: nand@40000000 {
 			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;	/* Enable PMECC */
+			atmel,pmecc-cap = <2>;
+			atmel,pmecc-sector-size = <512>;
 			nand-on-flash-bbt;
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index 9b72054a0bc0..aafda174a605 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,5 +1,4 @@
 /dts-v1/;
-/memreserve/ 0x0c000000 0x04000000;
 /include/ "bcm2835.dtsi"
 
 / {
@@ -25,3 +24,18 @@
 		brcm,function = <7>; /* alt3 */
 	};
 };
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&sdhci {
+	status = "okay";
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 8917550fd1bb..4bf2a8774aa7 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -63,5 +63,49 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		i2c0: i2c@20205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clk_i2c>;
+			status = "disabled";
+		};
+
+		sdhci: sdhci {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clk_mmc>;
+			status = "disabled";
+		};
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		clk_mmc: mmc {
+			compatible = "fixed-clock";
+			reg = <0>;
+			#clock-cells = <0>;
+			clock-frequency = <100000000>;
+		};
+
+		clk_i2c: i2c {
+			compatible = "fixed-clock";
+			reg = <1>;
+			#clock-cells = <0>;
+			clock-frequency = <150000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 37dc5a3243b8..f712fb607a42 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,9 @@
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
 	soc {
+		pmx_core: pinmux@1c14120 {
+			status = "okay";
+		};
 		serial0: serial@1c42000 {
 			status = "okay";
 		};
@@ -24,5 +27,22 @@
 		serial2: serial@1d0d000 {
 			status = "okay";
 		};
+		rtc0: rtc@1c23000 {
+			status = "okay";
+		};
+		i2c0: i2c@1c22000 {
+			status = "okay";
+			clock-frequency = <100000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+		};
+		wdt: wdt@1c21000 {
+			status = "okay";
+		};
+	};
+	nand_cs3@62000000 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&nand_cs3_pins>;
 	};
 };
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 640ab75c20db..3ec1bda64356 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -28,14 +28,47 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x01c00000 0x400000>;
+		interrupt-parent = <&intc>;
 
+		pmx_core: pinmux@1c14120 {
+			compatible = "pinctrl-single";
+			reg = <0x14120 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-single,bit-per-mux;
+			pinctrl-single,register-width = <32>;
+			pinctrl-single,function-mask = <0xffffffff>;
+			status = "disabled";
+
+			nand_cs3_pins: pinmux_nand_pins {
+				pinctrl-single,bits = <
+					/* EMA_OE, EMA_WE */
+					0x1c 0x00110000  0x00ff0000
+					/* EMA_CS[4],EMA_CS[3]*/
+					0x1c 0x00000110  0x00000ff0
+					/*
+					 * EMA_D[0], EMA_D[1], EMA_D[2],
+					 * EMA_D[3], EMA_D[4], EMA_D[5],
+					 * EMA_D[6], EMA_D[7]
+					 */
+					0x24 0x11111111  0xffffffff
+					/* EMA_A[1], EMA_A[2] */
+					0x30 0x01100000  0x0ff00000
+				>;
+			};
+			i2c0_pins: pinmux_i2c0_pins {
+				pinctrl-single,bits = <
+					/* I2C0_SDA,I2C0_SCL */
+					0x10 0x00002200 0x0000ff00
+				>;
+			};
+		};
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
 			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <25>;
-			interrupt-parent = <&intc>;
 			status = "disabled";
 		};
 		serial1: serial@1d0c000 {
@@ -44,7 +77,6 @@
 			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <53>;
-			interrupt-parent = <&intc>;
 			status = "disabled";
 		};
 		serial2: serial@1d0d000 {
@@ -53,8 +85,40 @@
 			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <61>;
-			interrupt-parent = <&intc>;
 			status = "disabled";
 		};
+		rtc0: rtc@1c23000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x23000 0x1000>;
+			interrupts = <19
+				      19>;
+			status = "disabled";
+		};
+		i2c0: i2c@1c22000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x22000 0x1000>;
+			interrupts = <15>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+		wdt: wdt@1c21000 {
+			compatible = "ti,davinci-wdt";
+			reg = <0x21000 0x1000>;
+			status = "disabled";
+		};
+	};
+	nand_cs3@62000000 {
+		compatible = "ti,davinci-nand";
+		reg = <0x62000000 0x807ff
+		       0x68000000 0x8000>;
+		ti,davinci-chipselect = <1>;
+		ti,davinci-mask-ale = <0>;
+		ti,davinci-mask-cle = <0>;
+		ti,davinci-mask-chipsel = <0>;
+		ti,davinci-ecc-mode = "hw";
+		ti,davinci-ecc-bits = <4>;
+		ti,davinci-nand-use-bbt;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
new file mode 100644
index 000000000000..c2ef3a3d655e
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10037 Board";
+	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10037>;
+
+				hog_pins_cfa10037: hog-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index bdc80a4453dd..a0d3e9f1738e 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -23,69 +23,120 @@
 		apbh@80000000 {
 			pinctrl@80018000 {
 				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10049>;
+				pinctrl-1 = <&hog_pins_cfa10049
+					&hog_pins_cfa10049_pullup>;
 
 				hog_pins_cfa10049: hog-10049@0 {