diff options
author | Olof Johansson <olof@lixom.net> | 2019-12-12 09:38:22 -0800 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2019-12-12 09:38:23 -0800 |
commit | 89f33b984a51364465b32f8239eeb1daf62a6c03 (patch) | |
tree | 875fbf105b5ba9d524829392b8e1ec20a4983850 /arch | |
parent | 9103bb419aef8b908a169ebed0e1c16ae060576a (diff) | |
parent | 7947e3238b64c00c396e6f5738f94c4d653bc6a2 (diff) |
Merge tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.5:
- Add missing jedec,spi-nor compatible for imx6ul-14x14-evk board,
so that SPI NOR device can be probed.
- Fix power button of E60K02 board by removing LDORTC2 regulator.
- A couple of fixes on serial number support of i.MX6ULL/ULZ SoCs to
remove the boot regression caused by 8267ff89b713 ("ARM: imx: Add
serial number support for i.MX6/7 SoCs").
- A couple of fixes on LS1028A SoC TMU regarding to calibration data
and reboot register configuration.
- Fix a regression seen on imx6ul-evk board by marking always-on for
the regulator that is shared by many peripherals.
- Explicitly restore CONFIG_DEBUG_FS in imx_v6_v7_defconfig.
* tag 'imx-fixes-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: Fix boot crash if ocotp is not found
ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
ARM: dts: imx6ul-evk: Fix peripheral regulator
arm64: dts: ls1028a: fix reboot node
arm64: dts: ls1028a: fix typo in TMU calibration data
ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
ARM: dts: e60k02: fix power button
ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing
Link: https://lore.kernel.org/r/20191212122427.GK15858@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arm/boot/dts/e60k02.dtsi | 5 | ||||
-rw-r--r-- | arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 28 | ||||
-rw-r--r-- | arch/arm/configs/imx_v6_v7_defconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-imx/cpu.c | 8 | ||||
-rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 10 |
5 files changed, 35 insertions, 17 deletions
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi index 6472b056a001..5a2c5320437d 100644 --- a/arch/arm/boot/dts/e60k02.dtsi +++ b/arch/arm/boot/dts/e60k02.dtsi @@ -265,11 +265,6 @@ regulator-name = "LDORTC1"; regulator-boot-on; }; - - ldortc2_reg: LDORTC2 { - regulator-name = "LDORTC2"; - regulator-boot-on; - }; }; }; }; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index 1506eb12b21e..212144511b66 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -30,14 +30,26 @@ enable-active-high; }; - reg_sensors: regulator-sensors { + reg_peri_3v3: regulator-peri-3v3 { compatible = "regulator-fixed"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sensors_reg>; - regulator-name = "sensors-supply"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "VPERI_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio5 2 GPIO_ACTIVE_LOW>; + /* + * If you want to want to make this dynamic please + * check schematics and test all affected peripherals: + * + * - sensors + * - ethernet phy + * - can + * - bluetooth + * - wm8960 audio codec + * - ov5640 camera + */ + regulator-always-on; }; reg_can_3v3: regulator-can-3v3 { @@ -140,6 +152,7 @@ pinctrl-0 = <&pinctrl_enet1>; phy-mode = "rmii"; phy-handle = <ðphy0>; + phy-supply = <®_peri_3v3>; status = "okay"; }; @@ -148,6 +161,7 @@ pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rmii"; phy-handle = <ðphy1>; + phy-supply = <®_peri_3v3>; status = "okay"; mdio { @@ -193,8 +207,8 @@ magnetometer@e { compatible = "fsl,mag3110"; reg = <0x0e>; - vdd-supply = <®_sensors>; - vddio-supply = <®_sensors>; + vdd-supply = <®_peri_3v3>; + vddio-supply = <®_peri_3v3>; }; }; @@ -227,7 +241,7 @@ flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; @@ -462,7 +476,7 @@ >; }; - pinctrl_sensors_reg: sensorsreggrp { + pinctrl_peri_3v3: peri3v3grp { fsl,pins = < MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0 >; diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 26d6dee67aa6..3608e55eaecd 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -462,6 +462,7 @@ CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set CONFIG_PROVE_LOCKING=y # CONFIG_DEBUG_BUGVERBOSE is not set diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index d8118031c51f..871f98342d50 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -84,7 +84,7 @@ struct device * __init imx_soc_device_init(void) const char *ocotp_compat = NULL; struct soc_device *soc_dev; struct device_node *root; - struct regmap *ocotp; + struct regmap *ocotp = NULL; const char *soc_id; u64 soc_uid = 0; u32 val; @@ -148,11 +148,11 @@ struct device * __init imx_soc_device_init(void) soc_id = "i.MX6UL"; break; case MXC_CPU_IMX6ULL: - ocotp_compat = "fsl,imx6ul-ocotp"; + ocotp_compat = "fsl,imx6ull-ocotp"; soc_id = "i.MX6ULL"; break; case MXC_CPU_IMX6ULZ: - ocotp_compat = "fsl,imx6ul-ocotp"; + ocotp_compat = "fsl,imx6ull-ocotp"; soc_id = "i.MX6ULZ"; break; case MXC_CPU_IMX6SLL: @@ -175,7 +175,9 @@ struct device * __init imx_soc_device_init(void) ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat); if (IS_ERR(ocotp)) pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat); + } + if (!IS_ERR_OR_NULL(ocotp)) { regmap_read(ocotp, OCOTP_UID_H, &val); soc_uid = val; regmap_read(ocotp, OCOTP_UID_L, &val); diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 8e8a77eb596a..13a3cbe89b5a 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -88,7 +88,7 @@ reboot { compatible ="syscon-reboot"; - regmap = <&dcfg>; + regmap = <&rst>; offset = <0xb0>; mask = <0x02>; }; @@ -178,6 +178,12 @@ big-endian; }; + rst: syscon@1e60000 { + compatible = "syscon"; + reg = <0x0 0x1e60000 0x0 0x10000>; + little-endian; + }; + scfg: syscon@1fc0000 { compatible = "fsl,ls1028a-scfg", "syscon"; reg = <0x0 0x1fc0000 0x0 0x10000>; @@ -584,7 +590,7 @@ 0x00010004 0x0000003d 0x00010005 0x00000045 0x00010006 0x0000004d - 0x00010007 0x00000045 + 0x00010007 0x00000055 0x00010008 0x0000005e 0x00010009 0x00000066 0x0001000a 0x0000006e |