Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Our first batch of fixes this release cycle, unfortunately a bit
  noisier than usual. Two major groups stand out:

   - Some pinctril dts/dtsi changes for stm32 due to a new driver being
     merged during the merge window, and this aligns the DT contents
     between the old format and the new. This could arguably be moved to
     the next merge window but it also seemed relatively harmless to
     include now.

   - Amlogic/meson had driver changes merged that required devicetree
     changes to avoid functional/performance regressions. I've already
     asked them to be more careful about this going forward, and making
     sure drivers are compatible with older DTs when they make these
     kind of changes. The platform is actively being upstreamed so
     there's a few things in flight, we've seen this happen before and
     sometimes it's hard to catch in time.

  Besides that there is the usual mix of minor fixes"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (33 commits)
  ARM: dts: stm32: use right pinctrl compatible for stm32f469
  ARM: dts: stm32: Fix STMPE1600 binding on stm32429i-eval board
  ARM: defconfig: update Gemini defconfig
  ARM: defconfig: FRAMEBUFFER_CONSOLE can no longer be =m
  arm64: dts: rockchip: add the grf clk for dw-mipi-dsi on rk3399
  reset: Restrict RESET_HSDK to ARC_SOC_HSDK or COMPILE_TEST
  ARM: dts: da850-evm: add serial and ethernet aliases
  ARM: dts: am43xx-epos-evm: Remove extra CPSW EMAC entry
  ARM: dts: am33xx: Add spi alias to match SOC schematics
  ARM: OMAP2+: hsmmc: fix logic to call either omap_hsmmc_init or omap_hsmmc_late_init but not both
  ARM: dts: dra7: Set a default parent to mcasp3_ahclkx_mux
  ARM: OMAP2+: dra7xx: Set OPT_CLKS_IN_RESET flag for gpio1
  ARM: dts: nokia n900: drop unneeded/undocumented parts of the dts
  arm64: dts: rockchip: Correct MIPI DPHY PLL clock on rk3399
  arm64: dt marvell: Fix AP806 system controller size
  MAINTAINERS: add Macchiatobin maintainers entry
  ARC: reset: remove the misleading v1 suffix all over
  ARC: reset: add missing DT binding documentation for HSDKv1 reset driver
  ARC: reset: Only build on archs that have IOMEM
  ARM: at91: Replace uses of virt_to_phys with __pa_symbol
  ...

37 files changed, 728 insertions, 456 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 7d7ca054c557..e58fab8aec5d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -36,6 +36,8 @@
 		phy1 = &usb1_phy;
 		ethernet0 = &cpsw_emac0;
 		ethernet1 = &cpsw_emac1;
+		spi0 = &spi0;
+		spi1 = &spi1;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 9d276af7c539..081fa68b6f98 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -388,6 +388,7 @@
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
+	slaves = <1>;
 };
 
 &davinci_mdio {
@@ -402,11 +403,6 @@
 	phy-mode = "rmii";
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rmii";
-};
-
 &phy_sel {
 	rmii-clock-ext;
 };
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index 9c9088c99cc4..60cb084a8d92 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -67,7 +67,10 @@
 
 		usb1: ohci@00400000 {
 			num-ports = <3>;
-			atmel,vbus-gpio = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
@@ -120,7 +123,7 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
 				atmel,use-dma-rx;
-				atmel-use-dma-tx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -178,7 +181,7 @@
 			uart4: serial@fc00c000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
-				pinctrl-name = "default";
+				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
 				status = "okay";
 			};
@@ -330,7 +333,7 @@
 				};
 
 				pinctrl_led_gpio_default: led_gpio_default {
-					pinmux = <PIN_PA27__GPIO>,
+					pinmux = <PIN_PA10__GPIO>,
 						 <PIN_PB1__GPIO>,
 						 <PIN_PA31__GPIO>;
 					bias-pull-up;
@@ -396,7 +399,7 @@
 				};
 
 				pinctrl_usb_default: usb_default {
-					pinmux = <PIN_PA10__GPIO>,
+					pinmux = <PIN_PA27__GPIO>,
 						 <PIN_PD19__GPIO>;
 					bias-disable;
 				};
@@ -520,17 +523,17 @@
 
 		red {
 			label = "red";
-			gpios = <&pioA PIN_PA27 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
 		};
 
 		green {
 			label = "green";
-			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
 		};
 
 		blue {
 			label = "blue";
-			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_LOW>;
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 67e72bc72e80..c75507922f7d 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -15,6 +15,13 @@
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
 	soc@1c00000 {
 		pmx_core: pinmux@14120 {
 			status = "okay";
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index cf229dfabf61..e62b62875cba 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1817,6 +1817,8 @@
 		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
 		ti,bit-shift = <24>;
 		reg = <0x1868>;
+		assigned-clocks = <&mcasp3_ahclkx_mux>;
+		assigned-clock-parents = <&abe_24m_fclk>;
 	};
 
 	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@1868 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 26c20e1167b9..4acd32a1c4ef 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -144,15 +144,6 @@
 		io-channel-names = "temp", "bsi", "vbat";
 	};
 
-	rear_camera: camera@0 {
-		compatible = "linux,camera";
-
-		module {
-			model = "TCM8341MD";
-			sensor = <&cam1>;
-		};
-	};
-
 	pwm9: dmtimer-pwm {
 		compatible = "ti,omap-dmtimer-pwm";
 		#pwm-cells = <3>;
@@ -189,10 +180,8 @@
 				clock-lanes = <1>;
 				data-lanes = <0>;
 				lane-polarity = <0 0>;
-				clock-inv = <0>;
 				/* Select strobe = <1> for back camera, <0> for front camera */
 				strobe = <1>;
-				crc = <0>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index 97b1c2321ba9..293ecb957227 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
@@ -202,10 +203,8 @@
 	stmpe1600: stmpe1600@42 {
 		compatible = "st,stmpe1600";
 		reg = <0x42>;
-		irq-gpio = <&gpioi 8 0>;
-		irq-trigger = <3>;
 		interrupts = <8 3>;
-		interrupt-parent = <&exti>;
+		interrupt-parent = <&gpioi>;
 		interrupt-controller;
 		wakeup-source;
 
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
new file mode 100644
index 000000000000..7f3560c0211d
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -0,0 +1,343 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
+#include <dt-bindings/mfd/stm32f4-rcc.h>
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x40020000 0x3000>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&syscfg 0x8>;
+			pins-are-numbered;
+
+			gpioa: gpio@40020000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
+				st,bank-name = "GPIOA";
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
+				st,bank-name = "GPIOB";
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOC)>;
+				st,bank-name = "GPIOC";
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0xc00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOD)>;
+				st,bank-name = "GPIOD";
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOE)>;
+				st,bank-name = "GPIOE";
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOF)>;
+				st,bank-name = "GPIOF";
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOG)>;
+				st,bank-name = "GPIOG";
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x1c00 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOH)>;
+				st,bank-name = "GPIOH";
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2000 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOI)>;
+				st,bank-name = "GPIOI";
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2400 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOJ)>;
+				st,bank-name = "GPIOJ";
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x2800 0x400>;
+				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOK)>;
+				st,bank-name = "GPIOK";
+			};
+
+			usart1_pins_a: usart1@0 {
+				pins1 {
+					pinmux = <STM32F429_PA9_FUNC_USART1_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PA10_FUNC_USART1_RX>;
+					bias-disable;
+				};
+			};
+
+			usart3_pins_a: usart3@0 {
+				pins1 {
+					pinmux = <STM32F429_PB10_FUNC_USART3_TX>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32F429_PB11_FUNC_USART3_RX>;
+					bias-disable;
+				};
+			};
+
+			usbotg_fs_pins_a: usbotg_fs@0 {
+				pins {
+					pinmux = <STM32F429_PA10_FUNC_OTG_FS_ID>,
+						 <STM32F429_PA11_FUNC_OTG_FS_DM>,
+						 <STM32F429_PA12_FUNC_OTG_FS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_fs_pins_b: usbotg_fs@1 {
+				pins {
+					pinmux = <STM32F429_PB12_FUNC_OTG_HS_ID>,
+						 <STM32F429_PB14_FUNC_OTG_HS_DM>,
+						 <STM32F429_PB15_FUNC_OTG_HS_DP>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			usbotg_hs_pins_a: usbotg_hs@0 {
+				pins {
+					pinmux = <STM32F429_PH4_FUNC_OTG_HS_ULPI_NXT>,
+						 <STM32F429_PI11_FUNC_OTG_HS_ULPI_DIR>,
+						 <STM32F429_PC0_FUNC_OTG_HS_ULPI_STP>,
+						 <STM32F429_PA5_FUNC_OTG_HS_ULPI_CK>,
+						 <STM32F429_PA3_FUNC_OTG_HS_ULPI_D0>,
+						 <STM32F429_PB0_FUNC_OTG_HS_ULPI_D1>,
+						 <STM32F429_PB1_FUNC_OTG_HS_ULPI_D2>,
+						 <STM32F429_PB10_FUNC_OTG_HS_ULPI_D3>,
+						 <STM32F429_PB11_FUNC_OTG_HS_ULPI_D4>,
+						 <STM32F429_PB12_FUNC_OTG_HS_ULPI_D5>,
+						 <STM32F429_PB13_FUNC_OTG_HS_ULPI_D6>,
+						 <STM32F429_PB5_FUNC_OTG_HS_ULPI_D7>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <2>;
+				};
+			};
+
+			ethernet_mii: mii@0 {
+				pins {
+					pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+						 <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+						 <STM32F429_PC2_FUNC_ETH_MII_TXD2>,
+						 <STM32F429_PB8_FUNC_ETH_MII_TXD3>,
+						 <STM32F429_PC3_FUNC_ETH_MII_TX_CLK>,
+						 <STM32F429_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+						 <STM32F429_PA2_FUNC_ETH_MDIO>,
+						 <STM32F429_PC1_FUNC_ETH_MDC>,
+						 <STM32F429_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+						 <STM32F429_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+						 <STM32F429_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+						 <STM32F429_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>,
+						 <STM32F429_PH6_FUNC_ETH_MII_RXD2>,
+						 <STM32F429_PH7_FUNC_ETH_MII_RXD3>;
+					slew-rate = <2>;
+				};
+			};
+
+			adc3_in8_pin: adc@200 {
+				pins {
+					pinmux = <STM32F429_PF10_FUNC_ANALOG>;
+				};
+			};
+
+			pwm1_pins: pwm@1 {
+				pins {
+					pinmux = <STM32F429_PA8_FUNC_TIM1_CH1>,
+						 <STM32F429_PB13_FUNC_TIM1_CH1N>,
+						 <STM32F429_PB12_FUNC_TIM1_BKIN>;
+				};
+			};
+
+			pwm3_pins: pwm@3 {
+				pins {
+					pinmux = <STM32F429_PB4_FUNC_TIM3_CH1>,
+						 <STM32F429_PB5_FUNC_TIM3_CH2>;
+				};
+			};
+
+			i2c1_pins: i2c1@0 {
+				pins {
+					pinmux = <STM32F429_PB9_FUNC_I2C1_SDA>,
+						 <STM32F429_PB6_FUNC_I2C1_SCL>;
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
+			ltdc_pins: ltdc@0 {
+				pins {
+					pinmux = <STM32F429_PI12_FUNC_LCD_HSYNC>,
+						 <STM32F429_PI13_FUNC_LCD_VSYNC>,
+						 <STM32F429_PI14_FUNC_LCD_CLK>,
+						 <STM32F429_PI15_FUNC_LCD_R0>,
+						 <STM32F429_PJ0_FUNC_LCD_R1>,
+						 <STM32F429_PJ1_FUNC_LCD_R2>,
+						 <STM32F429_PJ2_FUNC_LCD_R3>,
+						 <STM32F429_PJ3_FUNC_LCD_R4>,
+						 <STM32F429_PJ4_FUNC_LCD_R5>,
+						 <STM32F429_PJ5_FUNC_LCD_R6>,
+						 <STM32F429_PJ6_FUNC_LCD_R7>,
+						 <STM32F429_PJ7_FUNC_LCD_G0>,
+						 <STM32F429_PJ8_FUNC_LCD_G1>,
+						 <STM32F429_PJ9_FUNC_LCD_G2>,
+						 <STM32F429_PJ10_FUNC_LCD_G3>,
+						 <STM32F429_PJ11_FUNC_LCD_G4>,
+						 <STM32F429_PJ12_FUNC_LCD_B0>,
+						 <STM32F429_PJ13_FUNC_LCD_B1>,
+						 <STM32F429_PJ14_FUNC_LCD_B2>,
+						 <STM32F429_PJ15_FUNC_LCD_B3>,
+						 <STM32F429_PK0_FUNC_LCD_G5>,
+						 <STM32F429_PK1_FUNC_LCD_G6>,
+						 <STM32F429_PK2_FUNC_LCD_G7>,
+						 <STM32F429_PK3_FUNC_LCD_B4>,
+						 <STM32F429_PK4_FUNC_LCD_B5>,
+						 <STM32F429_PK5_FUNC_LCD_B6>,
+						 <STM32F429_PK6_FUNC_LCD_B7>,
+						 <STM32F429_PK7_FUNC_LCD_DE>;
+					slew-rate = <2>;
+				};
+			};
+
+			dcmi_pins: dcmi@0 {
+				pins {
+					pinmux = <STM32F429_PA4_FUNC_DCMI_HSYNC>,
+						 <STM32F429_PB7_FUNC_DCMI_VSYNC>,
+						 <STM32F429_PA6_FUNC_DCMI_PIXCLK>,
+						 <STM32F429_PC6_FUNC_DCMI_D0>,
+						 <STM32F429_PC7_FUNC_DCMI_D1>,
+						 <STM32F429_PC8_FUNC_DCMI_D2>,
+						 <STM32F429_PC9_FUNC_DCMI_D3>,
+						 <STM32F429_PC11_FUNC_DCMI_D4>,
+						 <STM32F429_PD3_FUNC_DCMI_D5>,
+						 <STM32F429_PB8_FUNC_DCMI_D6>,
+						 <STM32F429_PE6_FUNC_DCMI_D7>,
+						 <STM32F429_PC10_FUNC_DCMI_D8>,
+						 <STM32F429_PC12_FUNC_DCMI_D9>,
+						 <STM32F429_PD6_FUNC_DCMI_D10>,
+						 <STM32F429_PD2_FUNC_DCMI_D11>;
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <3>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index c66d617e4245..5ceb2cf3777f 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -47,6 +47,7 @@
 
 /dts-v1/;
 #include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
 
 / {
diff --git a/arch/arm/boot/dts/stm32f429-pinctrl.dtsi b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
new file mode 100644
index 000000000000..3e7a17d9112e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2017 - Alexandre Torgue <alexandre.torgue@st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "stm32f4-pinctrl.dtsi"
+
+/ {
+	soc {
+		pinctrl: pin-controller {
+			compatible = "st,stm32f429-pinctrl";
+
+			gpioa: gpio@40020000 {
+				gpio-ranges = <&pinctrl 0 0 16>;
+			};
+
+			gpiob: gpio@40020400 {
+				gpio-ranges = <&pinctrl 0 16 16>;
+			};
+
+			gpioc: gpio@40020800 {
+				gpio-ranges = <&pinctrl 0 32 16>;
+			};
+
+			gpiod: gpio@40020c00 {
+				gpio-ranges = <&pinctrl 0 48 16>;
+			};
+
+			gpioe: gpio@40021000 {
+				gpio-ranges = <&pinctrl 0 64 16>;
+			};
+
+			gpiof: gpio@40021400 {
+				gpio-ranges = <&pinctrl 0 80 16>;
+			};
+
+			gpiog: gpio@40021800 {
+				gpio-ranges = <&pinctrl 0 96 16>;
+			};
+
+			gpioh: gpio@40021c00 {
+				gpio-ranges = <&pinctrl 0 112 16>;
+			};
+
+			gpioi: gpio@40022000 {
+				gpio-ranges = <&pinctrl 0 128 16>;
+			};
+
+			gpioj: gpio@40022400 {
+				gpio-ranges = <&pinctrl 0 144 16>;
+			};
+
+			gpiok: gpio@40022800 {
+				gpio-ranges = <&pinctrl 0 160 8>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index dd7e99b1f43b..5b36eb114ddc 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -47,7 +47,6 @@
 
 #include "skeleton.dtsi"
 #include "armv7-m.dtsi"
-#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
 #include <dt-bindings/clock/stm32fx-clock.h>
 #include <dt-bindings/mfd/stm32f4-rcc.h>
 
@@ -591,302 +590,6 @@
 			status = "disabled";
 		};
 
-		pinctrl: pin-controller {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "st,stm32f429-pinctrl";
-			ranges = <0 0x40020000 0x3000>;
-			interrupt-parent = <&exti>;
-			st,syscfg = <&syscfg 0x8>;
-			pins-are-numbered;
-
-			gpioa: gpio@40020000 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x0 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOA)>;
-				st,bank-name = "GPIOA";
-			};
-
-			gpiob: gpio@40020400 {
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				reg = <0x400 0x400>;
-				clocks = <&rcc 0 STM32F4_AHB1_CLOCK(GPIOB)>;
-				st,bank-name = "GPIOB";
-			};
-
-			gpioc: gpio@40020800 {
-				gpio-controller;
-				#gpio-cells = <2>;