diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-24 12:50:56 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-24 12:50:56 -0800 |
commit | e2464688b59c6ae9928f385dabf5355e30cff298 (patch) | |
tree | 1039fa8c818e6ac16d6f1504c28e80bfe902b0f3 /arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi | |
parent | e1c10879ed59436cde537b723545430b04d4dec0 (diff) | |
parent | 07d17f09691e549fac0101333eebe0161a472b50 (diff) |
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
"This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.
The executive summary:
- ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
- Avoid useless rebuilds for zboot.
- jz4780: Add NEMC, BCH and NAND device tree nodes
- Initial support for the MicroChip's DT platform. As all the device
drivers are missing this is still of limited use.
- Some Loongson3 cleanups.
- The unavoidable whitespace polishing.
- Reduce clock skew when synchronizing the CPU cycle counters on CPU
startup.
- Add MIPS R6 fixes.
- Lots of cleanups across arch/mips as fallout from KVM.
- Lots of minor fixes and changes for IEEE 754-2008 support to the
FPU emulator / fp-assist software.
- Minor Ralink, BCM47xx and bcm963xx platform support improvments.
- Support SMP on BCM63168"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
MIPS: zboot: Add support for serial debug using the PROM
MIPS: zboot: Avoid useless rebuilds
MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
MIPS: bcm963xx: Update bcm_tag field image_sequence
MIPS: bcm963xx: Move extended flash address to bcm_tag header file
MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
MIPS: bcm63xx: nvram: Use nvram structure definition from header file
MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
MAINTAINERS: Add KVM for MIPS entry
MIPS: KVM: Add missing newline to kvm_err()
MIPS: Move KVM specific opcodes into asm/inst.h
MIPS: KVM: Use cacheops.h definitions
MIPS: Break down cacheops.h definitions
MIPS: Use EXCCODE_ constants with set_except_vector()
MIPS: Update trap codes
MIPS: Move Cause.ExcCode trap codes to mipsregs.h
MIPS: KVM: Make kvm_mips_{init,exit}() static
MIPS: KVM: Refactor added offsetof()s
MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
...
Diffstat (limited to 'arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi')
-rw-r--r-- | arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi new file mode 100644 index 000000000000..ef1335012f43 --- /dev/null +++ b/arch/mips/boot/dts/pic32/pic32mzda-clk.dtsi @@ -0,0 +1,236 @@ +/* + * Device Tree Source for PIC32MZDA clock data + * + * Purna Chandra Mandal <purna.mandal@microchip.com> + * Copyright (C) 2015 Microchip Technology Inc. All rights reserved. + * + * Licensed under GPLv2 or later. + */ + +/* all fixed rate clocks */ + +/ { + POSC:posc_clk { /* On-chip primary oscillator */ + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + FRC:frc_clk { /* internal FRC oscillator */ + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <8000000>; + }; + + BFRC:bfrc_clk { /* internal backup FRC oscillator */ + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <8000000>; + }; + + LPRC:lprc_clk { /* internal low-power FRC oscillator */ + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; + + /* UPLL provides clock to USBCORE */ + UPLL:usb_phy_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "usbphy_clk"; + }; + + TxCKI:txcki_clk { /* external clock input on TxCLKI pin */ + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <4000000>; + status = "disabled"; + }; + + /* external clock input on REFCLKIx pin */ + REFIx:refix_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + status = "disabled"; + }; + + /* PIC32 specific clks */ + pic32_clktree { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1f801200 0x200>; + compatible = "microchip,pic32mzda-clk"; + ranges = <0 0x1f801200 0x200>; + + /* secondary oscillator; external input on SOSCI pin */ + SOSC:sosc_clk@0 { + #clock-cells = <0>; + compatible = "microchip,pic32mzda-sosc"; + clock-frequency = <32768>; + reg = <0x000 0x10>, /* enable reg */ + <0x1d0 0x10>; /* status reg */ + microchip,bit-mask = <0x02>; /* enable mask */ + microchip,status-bit-mask = <0x10>; /* status-mask*/ + }; + + FRCDIV:frcdiv_clk { + #clock-cells = <0>; + compatible = "microchip,pic32mzda-frcdivclk"; + clocks = <&FRC>; + clock-output-names = "frcdiv_clk"; + }; + + /* System PLL clock */ + SYSPLL:spll_clk@020 { + #clock-cells = <0>; + compatible = "microchip,pic32mzda-syspll"; + reg = <0x020 0x10>, /* SPLL register */ + <0x1d0 0x10>; /* CLKSTAT register */ + clocks = <&POSC>, <&FRC>; + clock-output-names = "sys_pll"; + microchip,status-bit-mask = <0x80>; /* SPLLRDY */ + }; + + /* system clock; mux with postdiv & slew */ + SYSCLK:sys_clk@1c0 { + #clock-cells = <0>; + compatible = "microchip,pic32mzda-sysclk-v2"; + reg = <0x1c0 0x04>; /* SLEWCON */ + clocks = <&FRCDIV>, <&SYSPLL>, <&POSC>, <&SOSC>, + <&LPRC>, <&FRCDIV>; + microchip,clock-indices = <0>, <1>, <2>, <4>, + <5>, <7>; + clock-output-names = "sys_clk"; + }; + + /* Peripheral bus1 clock */ + PBCLK1:pb1_clk@140 { + reg = <0x140 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb1_clk"; + /* used by system modules, not gateable */ + microchip,ignore-unused; + }; + + /* Peripheral bus2 clock */ + PBCLK2:pb2_clk@150 { + reg = <0x150 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb2_clk"; + /* avoid gating even if unused */ + microchip,ignore-unused; + }; + + /* Peripheral bus3 clock */ + PBCLK3:pb3_clk@160 { + reg = <0x160 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb3_clk"; + }; + + /* Peripheral bus4 clock(I/O ports, GPIO) */ + PBCLK4:pb4_clk@170 { + reg = <0x170 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb4_clk"; + }; + + /* Peripheral bus clock */ + PBCLK5:pb5_clk@180 { + reg = <0x180 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-pbclk"; + clocks = <&SYSCLK>; + clock-output-names = "pb5_clk"; + }; + + /* Peripheral Bus6 clock; */ + PBCLK6:pb6_clk@190 { + reg = <0x190 0x10>; + compatible = "microchip,pic32mzda-pbclk"; + clocks = <&SYSCLK>; + #clock-cells = <0>; + }; + + /* Peripheral bus7 clock */ + PBCLK7:pb7_clk@1a0 { + reg = <0x1a0 0x10>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-pbclk"; + /* CPU is driven by this clock; so named */ + clock-output-names = "cpu_clk"; + clocks = <&SYSCLK>; + }; + + /* Reference Oscillator clock for SPI/I2S */ + REFCLKO1:refo1_clk@80 { + reg = <0x080 0x20>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, + <5>, <7>, <8>, <9>; + clock-output-names = "refo1_clk"; + }; + + /* Reference Oscillator clock for SQI */ + REFCLKO2:refo2_clk@a0 { + reg = <0x0a0 0x20>; + #clock-cells = <0>; + compatible = "microchip,pic32mzda-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, + <5>, <7>, <8>, <9>; + clock-output-names = "refo2_clk"; + }; + + /* Reference Oscillator clock, ADC */ + REFCLKO3:refo3_clk@c0 { + reg = <0x0c0 0x20>; + compatible = "microchip,pic32mzda-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, + <5>, <7>, <8>, <9>; + #clock-cells = <0>; + clock-output-names = "refo3_clk"; + }; + + /* Reference Oscillator clock */ + REFCLKO4:refo4_clk@e0 { + reg = <0x0e0 0x20>; + compatible = "microchip,pic32mzda-refoclk"; + clocks = <&SYSCLK>, <&PBCLK1>, <&POSC>, <&FRC>, <&LPRC>, + <&SOSC>, <&SYSPLL>, <&REFIx>, <&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, + <5>, <7>, <8>, <9>; + #clock-cells = <0>; + clock-output-names = "refo4_clk"; + }; + + /* Reference Oscillator clock, LCD */ + REFCLKO5:refo5_clk@100 { + reg = <0x100 0x20>; + compatible = "microchip,pic32mzda-refoclk"; + clocks = <&SYSCLK>,<&PBCLK1>,<&POSC>,<&FRC>,<&LPRC>, + <&SOSC>,<&SYSPLL>,<&REFIx>,<&BFRC>; + microchip,clock-indices = <0>, <1>, <2>, <3>, <4>, + <5>, <7>, <8>, <9>; + #clock-cells = <0>; + clock-output-names = "refo5_clk"; + }; + }; +}; |