Merge tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.4:
 - New board support: i.MX8MQ Nitrogen8m, Hummingboard Pulse,
   PICO-PI-IMX8M, i.MX8QXP AI_ML, and LS1046A FRWY board.
 - Add gpio-ranges for GPIO devices on i.MX8MQ and i.MX8MM.
 - Update OPP table according to latest data sheet and add opp-suspend
   to OPP table for i.MX8MQ and i.MX8MM.
 - Add IDEL states for i.MX8MM SoC.
 - Correct I2C clock divider for Layerscape SoCs.
 - Add series alias and LPUART baud clock for i.MX8QXP SoC.
 - Add MIPI D-PHY device for i.MX8MQ and enable it on imx8mq-librem5
   board.
 - Enable USB1 and Type-C support for i.MX8MM EVK board.
 - Add Thermal Monitor Unit support for LS1028A SoC.
 - Misc small update and correction on Layerscape and i.MX8 support.

* tag 'imx-dt64-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (41 commits)
  arm64: dts: imx8mq: Add mux controller to iomuxc_gpr
  arm64: dts: fsl: add support for Hummingboard Pulse
  arm64: dts: ls1088a: update gpio compatible
  arm64: dts: imx: Add i.mx8mq nitrogen8m basic dts support
  arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller
  arm64: dts: ls1088a: Add the DSPI controller node
  arm64: dts: imx8mm: Enable cpu-idle driver
  arm64: dts: ls1028a: Add esdhc node in dts
  arm64: dts: ls1028a: Add properties node for Display output pixel clock
  arm64: dts: lx2160a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: Fix incorrect I2C clock divider
  arm64: dts: ls1012a: Fix incorrect I2C clock divider
  arm64: dts: ls1088a: Fix incorrect I2C clock divider
  arm64: dts: ls1028a: fix gpio nodes
  arm64: dts: ls1028a: Add Thermal Monitor Unit node
  arm64: dts: imx8mq-evk: Unbypass audio_pll1
  arm64: dts: imx8mm: Add opp-suspend property to OPP table
  arm64: dts: imx8mq: Add opp-suspend property to OPP table
  arm64: dts: ls1088a: Revise gpio registers to little-endian
  arm64: dts: add the console node for DPAA2 platforms
  ...

Link: https://lore.kernel.org/r/20190825153237.28829-6-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

22 files changed, 2241 insertions, 84 deletions

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 9ca375640f23..93fce8f0c66d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
@@ -23,7 +24,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index ec6257a5b251..124a7e2d8442 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -323,7 +323,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2180000 0x0 0x10000>;
 			interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 0>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -333,7 +333,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2190000 0x0 0x10000>;
 			interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 0>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index de6ef39f3118..5e14e5a19744 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -95,6 +95,14 @@
 	status = "okay";
 };
 
+&esdhc {
+	status = "okay";
+};
+
+&esdhc1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9fb911317ecd..1a69221d9a1b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -83,6 +83,19 @@
 	};
 };
 
+&esdhc {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 7975519b4f56..b139b29cef87 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -29,6 +29,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PW20>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -39,6 +40,7 @@
 			clocks = <&clockgen 1 0>;
 			next-level-cache = <&l2>;
 			cpu-idle-states = <&CPU_PW20>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache {
@@ -70,11 +72,18 @@
 		clock-output-names = "sysclk";
 	};
 
-	dpclk: clock-dp {
+	osc_27m: clock-osc-27m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
-		clock-output-names= "dpclk";
+		clock-output-names = "phy_27m";
+	};
+
+	dpclk: clock-controller@f1f0000 {
+		compatible = "fsl,ls1028a-plldig";
+		reg = <0x0 0xf1f0000 0x0 0xffff>;
+		#clock-cells = <1>;
+		clocks = <&osc_27m>;
 	};
 
 	aclk: clock-axi {
@@ -171,7 +180,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -181,7 +190,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -191,7 +200,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -201,7 +210,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -211,7 +220,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -221,7 +230,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -231,7 +240,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
 			status = "disabled";
 		};
 
@@ -241,7 +250,34 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 1>;
+			clocks = <&clockgen 4 3>;
+			status = "disabled";
+		};
+
+		esdhc: mmc@2140000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			little-endian;
+			bus-width = <4>;
+			status = "disabled";
+		};
+
+		esdhc1: mmc@2150000 {
+			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
+			reg = <0x0 0x2150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <0>; /* fixed up by bootloader */
+			clocks = <&clockgen 2 1>;
+			voltage-ranges = <1800 1800 3300 3300>;
+			sdhci,auto-cmd12;
+			broken-cd;
+			little-endian;
+			bus-width = <4>;
 			status = "disabled";
 		};
 
@@ -277,33 +313,36 @@
 		};
 
 		gpio1: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			little-endian;
 		};
 
 		gpio2: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			little-endian;
 		};
 
 		gpio3: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			little-endian;
 		};
 
 		usb0: usb@3100000 {
@@ -503,6 +542,89 @@
 			status = "disabled";
 		};
 
+		tmu: tmu@1f00000 {
+			compatible = "fsl,qoriq-tmu";
+			reg = <0x0 0x1f80000 0x0 0x10000>;
+			interrupts = <0 23 0x4>;
+			fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
+			fsl,tmu-calibration = <0x00000000 0x00000024
+					       0x00000001 0x0000002b
+					       0x00000002 0x00000031
+					       0x00000003 0x00000038
+					       0x00000004 0x0000003f
+					       0x00000005 0x00000045
+					       0x00000006 0x0000004c
+					       0x00000007 0x00000053
+					       0x00000008 0x00000059
+					       0x00000009 0x00000060
+					       0x0000000a 0x00000066
+					       0x0000000b 0x0000006d
+
+					       0x00010000 0x0000001c
+					       0x00010001 0x00000024
+					       0x00010002 0x0000002c
+					       0x00010003 0x00000035
+					       0x00010004 0x0000003d
+					       0x00010005 0x00000045
+					       0x00010006 0x0000004d
+					       0x00010007 0x00000045
+					       0x00010008 0x0000005e
+					       0x00010009 0x00000066
+					       0x0001000a 0x0000006e
+
+					       0x00020000 0x00000018
+					       0x00020001 0x00000022
+					       0x00020002 0x0000002d
+					       0x00020003 0x00000038
+					       0x00020004 0x00000043
+					       0x00020005 0x0000004d
+					       0x00020006 0x00000058
+					       0x00020007 0x00000063
+					       0x00020008 0x0000006e
+
+					       0x00030000 0x00000010
+					       0x00030001 0x0000001c
+					       0x00030002 0x00000029
+					       0x00030003 0x00000036
+					       0x00030004 0x00000042
+					       0x00030005 0x0000004f
+					       0x00030006 0x0000005b
+					       0x00030007 0x00000068>;
+			little-endian;
+			#thermal-sensor-cells = <1>;
+		};
+
+		thermal-zones {
+			core-cluster {
+				polling-delay-passive = <1000>;
+				polling-delay = <5000>;
+				thermal-sensors = <&tmu 0>;
+
+				trips {
+					core_cluster_alert: core-cluster-alert {
+						temperature = <85000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
+
+					core_cluster_crit: core-cluster-crit {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "critical";
+					};
+				};
+
+				cooling-maps {
+					map0 {
+						trip = <&core_cluster_alert>;
+						cooling-device =
+							<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					};
+				};
+			};
+		};
+
 		pcie@1f0000000 { /* Integrated Endpoint Root Complex */
 			compatible = "pci-host-ecam-generic";
 			reg = <0x01 0xf0000000 0x0 0x100000>;
@@ -551,9 +673,10 @@
 		interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 223 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "DE", "SE";
-		clocks = <&dpclk>, <&aclk>, <&aclk>, <&pclk>;
+		clocks = <&dpclk 0>, <&aclk>, <&aclk>, <&pclk>;
 		clock-names = "pxlclk", "mclk", "aclk", "pclk";
 		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+		arm,malidp-arqos-value = <0xd000d000>;
 
 		port {
 			dp0_out: endpoint {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
new file mode 100644
index 000000000000..3595be0f2527
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Freescale Layerscape-1046A family SoC.
+ *
+ * Copyright 2019 NXP.
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1046a.dtsi"
+
+/ {
+	model = "LS1046A FRWY Board";
+	compatible = "fsl,ls1046a-frwy", "fsl,ls1046a";
+
+	aliases {
+		serial0 = &duart0;
+		serial1 = &duart1;
+		serial2 = &duart2;
+		serial3 = &duart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "LT8642SEV-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&duart2 {
+	status = "okay";
+};
+
+&duart3 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			power-monitor@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			temperature-sensor@4c {
+				compatible = "nxp,sa56004";
+				reg = <0x4c>;
+				vcc-supply = <&sb_3v3>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+			};
+
+			eeprom@52 {
+				compatible = "atmel,24c512";
+				reg = <0x52>;
+			};
+
+			eeprom@53 {
+				compatible = "atmel,24c512";
+				reg = <0x53>;
+			};
+
+		};
+	};
+};
+
+&ifc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	/* NAND Flash */
+	ranges = <0x0 0x0 0x0 0x7e800000 0x00010000>;
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "fsl,ifc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x10000>;
+	};
+
+};
+
+#include "fsl-ls1046-post.dtsi"
+
+&fman0 {
+	ethernet@e0000 {
+		phy-handle = <&qsgmii_phy4>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@e8000 {
+		phy-handle = <&qsgmii_phy2>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@ea000 {
+		phy-handle = <&qsgmii_phy1>;
+		phy-connection-type = "qsgmii";
+	};
+
+	ethernet@f2000 {
+		phy-handle = <&qsgmii_phy3>;
+		phy-connection-type = "qsgmii";
+	};
+
+	mdio@fd000 {
+		qsgmii_phy1: ethernet-phy@1c {
+			reg = <0x1c>;
+		};
+
+		qsgmii_phy2: ethernet-phy@1d {
+			reg = <0x1d>;
+		};
+
+		qsgmii_phy3: ethernet-phy@1e {
+			reg = <0x1e>;
+		};
+
+		qsgmii_phy4: ethernet-phy@1f {
+			reg = <0x1f>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 6f48d21b97c0..120e62dad154 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -17,6 +17,39 @@
 	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
 };
 
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index dacd8cf03a7f..d1469b0747c7 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -252,6 +252,19 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		dspi: spi@2100000 {
+			compatible = "fsl,ls1088a-dspi",
+				     "fsl,ls1021a-v1.0-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dspi";
+			clocks = <&clockgen 4 1>;
+			spi-num-chipselects = <6>;
+			status = "disabled";
+		};
+
 		duart0: serial@21c0500 {
 			compatible = "fsl,ns16550", "ns16550a";
 			reg = <0x0 0x21c0500 0x0 0x100>;
@@ -269,9 +282,10 @@
 		};
 
 		gpio0: gpio@2300000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2300000 0x0 0x10000>;
 			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -279,9 +293,10 @@
 		};
 
 		gpio1: gpio@2310000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2310000 0x0 0x10000>;
 			interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -289,9 +304,10 @@
 		};
 
 		gpio2: gpio@2320000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2320000 0x0 0x10000>;
 			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -299,9 +315,10 @@
 		};
 
 		gpio3: gpio@2330000 {
-			compatible = "fsl,qoriq-gpio";
+			compatible = "fsl,ls1088a-gpio", "fsl,qoriq-gpio";
 			reg = <0x0 0x2330000 0x0 0x10000>;
 			interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -324,7 +341,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 7>;
 			status = "disabled";
 		};
 
@@ -334,7 +351,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 7>;
 			status = "disabled";
 		};
 
@@ -344,7 +361,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 7>;
 			status = "disabled";
 		};
 
@@ -354,7 +371,7 @@
 			#size-cells = <0>;
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clockgen 4 3>;
+			clocks = <&clockgen 4 7>;
 			status = "disabled";
 		};
 
@@ -609,6 +626,11 @@
 				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
 		ptp-timer@8b95000 {
 			compatible = "fsl,dpaa2-ptp";
 			reg = <0x0 0x8b95000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 3ace91945b72..64101c9962ce 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -321,6 +321,11 @@
 			};
 		};
 
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
 		ptp-timer@8b95000 {
 			compatible = "fsl,dpaa2-ptp";
 			reg = <0x0 0x8b95000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e6fdba39453c..408e0ecdce6a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -485,7 +485,7 @@
 			reg = <0x0 0x2000000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
 			status = "disabled";
 		};
@@ -497,7 +497,7 @@
 			reg = <0x0 0x2010000 0x0 0x10000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			status = "disabled";
 		};
 
@@ -508,7 +508,7 @@
 			reg = <0x0 0x2020000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			status = "disabled";
 		};
 
@@ -519,7 +519,7 @@
 			reg = <0x0 0x2030000 0x0 0x10000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			status = "disabled";
 		};
 
@@ -530,7 +530,7 @@
 			reg = <0x0 0x2040000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
 			status = "disabled";
 		};
@@ -542,7 +542,7 @@
 			reg = <0x0 0x2050000 0x0 0x10000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			status = "disabled";
 		};
 
@@ -553,7 +553,7 @@
 			reg = <0x0 0x2060000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			status = "disabled";
 		};
 
@@ -564,7 +564,7 @@
 			reg = <0x0 0x2070000 0x0 0x10000>;
 			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "i2c";
-			clocks = <&clockgen 4 7>;
+			clocks = <&clockgen 4 15>;
 			status = "disabled";
 		};
 
@@ -848,6 +848,11 @@
 			dma-coherent;
 		};
 
+		console@8340020 {
+			compatible = "fsl,dpaa2-console";
+			reg = <0x00000000 0x08340020 0 0x2>;
+		};
+
 		ptp-timer@8b95000 {
 			compatible = "fsl,dpaa2-ptp";
 			reg = <0x0 0x8b95000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index ee7f2b2fc1ff..f7a15f3904c2 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/usb/pd.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -89,9 +90,6 @@
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
-			at803x,led-act-blind-workaround;
-			at803x,eee-okay;
-			at803x,vddio-1p8v;
 		};
 	};
 };
@@ -115,6 +113,21 @@
 	status = "okay";
 };
 
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
 &usdhc2 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
@@ -257,6 +270,42 @@
 	};
 };
 
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec1>;
+		reg = <0x50>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 8>;
+		status = "okay";
+
+		port {
+			typec1_dr_sw: endpoint {
+				remote-endpoint = <&usb1_drd_sw>;
+			};
+		};
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 
@@ -299,6 +348,13 @@
 		>;
 	};
 
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+