Merge tag 'realview-broomstick-sweep' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/cleanup

Merge "delete the RealView boardfiles" from Linus Walleij:

This deletes the realview boardfiles, consolidates a bit
around the Kconfig options and leaves the mach-realview
directory nice and tidy, with all boards migrated over to
Device Tree.

* tag 'realview-broomstick-sweep' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: imply device tree boot
  ARM: realview: no need to select SMP_ON_UP explicitly
  ARM: realview: delete the RealView board files

24 files changed, 14 insertions, 3784 deletions

diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 70ab4a25a5f8..1d7c83e73ffb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -2,34 +2,29 @@ menuconfig ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7
 	select ARM_AMBA
+	select ARM_GIC
 	select ARM_TIMER_SP804
+	select CLK_SP810
 	select COMMON_CLK_VERSATILE
 	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-if ARCH_REALVIEW
-
-config REALVIEW_DT
-	bool "Support RealView(R) Device Tree based boot"
-	select ARM_GIC
-	select CLK_SP810
-	select HAVE_SMP
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	select HAVE_PATA_PLATFORM
+	select HAVE_TCM
 	select ICST
 	select MACH_REALVIEW_EB if ARCH_MULTI_V5
 	select MFD_SYSCON
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_SCHED_CLOCK
 	select POWER_RESET
 	select POWER_RESET_VERSATILE
 	select POWER_SUPPLY
-	select SMP_ON_UP if SMP
 	select SOC_REALVIEW
 	select USE_OF
 	help
-	  Include support for booting the ARM(R) RealView(R) evaluation
-	  boards using a device tree machine description.
+	  This enables support for ARM Ltd RealView boards.
+
+if ARCH_REALVIEW
 
 config MACH_REALVIEW_EB
 	bool "Support RealView(R) Emulation Baseboard"
@@ -60,8 +55,6 @@ config REALVIEW_EB_ARM1176
 config REALVIEW_EB_A9MP
 	bool "Support Multicore Cortex-A9 Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V7
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -71,30 +64,15 @@ config REALVIEW_EB_A9MP
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB && ARCH_MULTI_V6
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile fitted to the Realview(R)
 	  Emulation Baseboard platform.
 
-config REALVIEW_EB_ARM11MP_REVB
-	bool "Support ARM11MPCore RevB Tile"
-	depends on REALVIEW_EB_ARM11MP && ARCH_MULTI_V6
-	help
-	  Enable support for the ARM11MPCore Revision B tile on the
-	  Realview(R) Emulation Baseboard platform. Since there are device
-	  address differences, a kernel built with this option enabled is
-	  not compatible with other revisions of the ARM11MPCore tile.
-
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -106,7 +84,6 @@ config MACH_REALVIEW_PB11MP
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
 	depends on ARCH_MULTI_V6
-	select ARM_GIC
 	select CPU_V6
 	select HAVE_TCM
 	select MIGHT_HAVE_CACHE_L2X0
@@ -114,20 +91,9 @@ config MACH_REALVIEW_PB1176
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  ARM1176JZF-S.
 
-config REALVIEW_PB1176_SECURE_FLASH
-	bool "Allow access to the secure flash memory block"
-	depends on MACH_REALVIEW_PB1176
-	default n
-	help
-	  Select this option if Linux will only run in secure mode on the
-	  RealView PB1176 platform and access to the secure flash memory
-	  block (64MB @ 0x3c000000) is required.
-
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
 	  Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
@@ -136,10 +102,6 @@ config MACH_REALVIEW_PBA8
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore for Cortex-A9"
 	depends on ARCH_MULTI_V7
-	select ARM_GIC
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ZONE_DMA
@@ -147,16 +109,4 @@ config MACH_REALVIEW_PBX
 	  Include support for the ARM(R) RealView(R) Platform Baseboard
 	  Explore.
 
-config REALVIEW_HIGH_PHYS_OFFSET
-	bool "High physical base address for the RealView platform"
-	depends on MMU && !MACH_REALVIEW_PB1176
-	default y
-	help
-	  RealView boards other than PB1176 have the RAM available at
-	  0x70000000, 256MB of which being mirrored at 0x00000000. If
-	  the board supports 512MB of RAM, this option allows the
-	  memory to be accessed contiguously at the high physical
-	  offset. On the PBX board, disabling this option allows 1GB of
-	  RAM to be used with HIGHMEM.
-
 endif
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index 404882130956..adf39ad71cc3 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -3,16 +3,6 @@
 #
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include
 
-obj-y					:= core.o
-obj-$(CONFIG_REALVIEW_DT)		+= realview-dt.o
+obj-y					+= realview-dt.o
 obj-$(CONFIG_SMP)			+= platsmp-dt.o
-
-ifdef CONFIG_ATAGS
-obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
-obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
-obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
-obj-$(CONFIG_MACH_REALVIEW_PBA8)	+= realview_pba8.o
-obj-$(CONFIG_MACH_REALVIEW_PBX)		+= realview_pbx.o
-obj-$(CONFIG_SMP)			+= platsmp.o
-endif
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/board-eb.h b/arch/arm/mach-realview/board-eb.h
deleted file mode 100644
index a850ae6945b0..000000000000
--- a/arch/arm/mach-realview/board-eb.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2007 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_EB_H
-#define __ASM_ARCH_BOARD_EB_H
-
-#include "platform.h"
-
-/*
- * RealView EB + ARM11MPCore peripheral addresses
- */
-#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
-#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
-#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
-
-#define REALVIEW_EB_FLASH_BASE		0x40000000
-#define REALVIEW_EB_FLASH_SIZE		SZ_64M
-#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x10100000
-#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
-#else
-#define REALVIEW_EB11MP_PRIV_MEM_BASE	0x1F000000
-#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
-#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
-#endif
-
-#define REALVIEW_EB11MP_PRIV_MEM_SIZE	SZ_8K
-#define REALVIEW_EB11MP_PRIV_MEM_OFF(x)	(REALVIEW_EB11MP_PRIV_MEM_BASE + (x))
-
-#define REALVIEW_EB11MP_SCU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0)		/* SCU registers */
-#define REALVIEW_EB11MP_GIC_CPU_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100)	/* Generic interrupt controller CPU interface */
-#define REALVIEW_EB11MP_TWD_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600)
-#define REALVIEW_EB11MP_GIC_DIST_BASE	REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000)	/* Generic interrupt controller distributor */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_EB_PROC_MASK		0xFF000000
-#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
-#define REALVIEW_EB_PROC_ARM9		0x02000000
-#define REALVIEW_EB_PROC_ARM11		0x04000000
-#define REALVIEW_EB_PROC_ARM11MP	0x06000000
-#define REALVIEW_EB_PROC_A9MP		0x0C000000
-
-#define check_eb_proc(proc_type)						\
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
-	 == proc_type)
-
-#ifdef CONFIG_REALVIEW_EB_ARM11MP
-#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
-#else
-#define core_tile_eb11mp()	0
-#endif
-
-#ifdef CONFIG_REALVIEW_EB_A9MP
-#define core_tile_a9mp()	check_eb_proc(REALVIEW_EB_PROC_A9MP)
-#else
-#define core_tile_a9mp()	0
-#endif
-
-#define machine_is_realview_eb_mp() \
-	(machine_is_realview_eb() && (core_tile_eb11mp() || core_tile_a9mp()))
-
-#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/board-pb1176.h b/arch/arm/mach-realview/board-pb1176.h
deleted file mode 100644
index 29c04a9e1344..000000000000
--- a/arch/arm/mach-realview/board-pb1176.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB1176_H
-#define __ASM_ARCH_BOARD_PB1176_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB1176_UART4_BASE		0x10009000 /* UART 4 */
-#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
-#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
-#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
-#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
-#define REALVIEW_PB1176_FLASH_BASE		0x30000000
-#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
-#define REALVIEW_PB1176_SEC_FLASH_BASE		0x3C000000 /* Secure flash */
-#define REALVIEW_PB1176_SEC_FLASH_SIZE		SZ_64M
-
-#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
-#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
-#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
-#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
-#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
-#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
-#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
-#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
-#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
-#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
-#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
-#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
-#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
-#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
-
-/*
- * PCI regions
- */
-#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
-#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
-#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
-#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
-#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
-#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
-
-#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
-#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
-
-#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
-#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
-#define REALVIEW_DC1176_ROM_BASE		0x10200000 /* 16KiB NRAM preudo-ROM, on devchip */
-#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
-#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
-#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
-
-/*
- * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
- */
-#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
-
-#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/board-pb11mp.h b/arch/arm/mach-realview/board-pb11mp.h
deleted file mode 100644
index b16e6e85e92d..000000000000
--- a/arch/arm/mach-realview/board-pb11mp.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PB11MP_H
-#define __ASM_ARCH_BOARD_PB11MP_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
-#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
-#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
-#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
-#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
-#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
-#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
-#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
-#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
-#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
-#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
-#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
-#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
-
-/*
- * PB11MPCore PCI regions
- */
-#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Testchip peripheral and fpga gic regions
- */
-#define REALVIEW_TC11MP_PRIV_MEM_BASE		0x1F000000
-#define REALVIEW_TC11MP_PRIV_MEM_SIZE		SZ_8K
-#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
-#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
-#define REALVIEW_TC11MP_TWD_BASE		0x1F000600
-#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
-#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
-
- /*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
-
-#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/board-pba8.h b/arch/arm/mach-realview/board-pba8.h
deleted file mode 100644
index 6a1391f50373..000000000000
--- a/arch/arm/mach-realview/board-pba8.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2008 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_BOARD_PBA8_H
-#define __ASM_ARCH_BOARD_PBA8_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
-#define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
-#define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
-#define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
-#define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBA8_FLASH0_BASE		0x40000000
-#define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBA8_FLASH1_BASE		0x44000000
-#define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-#define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74
-
-/*
- * PBA8 PCI regions
- */
-#define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-#endif	/* __ASM_ARCH_BOARD_PBA8_H */
diff --git a/arch/arm/mach-realview/board-pbx.h b/arch/arm/mach-realview/board-pbx.h
deleted file mode 100644
index 5cda480b12bb..000000000000
--- a/arch/arm/mach-realview/board-pbx.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * Copyright (C) 2009 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_BOARD_PBX_H
-#define __ASM_ARCH_BOARD_PBX_H
-
-#include "platform.h"
-
-/*
- * Peripheral addresses
- */
-#define REALVIEW_PBX_UART0_BASE			0x10009000	/* UART 0 */
-#define REALVIEW_PBX_UART1_BASE			0x1000A000	/* UART 1 */
-#define REALVIEW_PBX_UART2_BASE			0x1000B000	/* UART 2 */
-#define REALVIEW_PBX_UART3_BASE			0x1000C000	/* UART 3 */
-#define REALVIEW_PBX_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
-#define REALVIEW_PBX_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
-#define REALVIEW_PBX_WATCHDOG_BASE		0x10010000	/* watchdog interface */
-#define REALVIEW_PBX_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
-#define REALVIEW_PBX_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
-#define REALVIEW_PBX_GPIO0_BASE			0x10013000	/* GPIO port 0 */
-#define REALVIEW_PBX_RTC_BASE			0x10017000	/* Real Time Clock */
-#define REALVIEW_PBX_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
-#define REALVIEW_PBX_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
-#define REALVIEW_PBX_SCTL_BASE			0x1001A000	/* System Controller */
-#define REALVIEW_PBX_CLCD_BASE			0x10020000	/* CLCD */
-#define REALVIEW_PBX_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
-#define REALVIEW_PBX_DMC_BASE			0x100E0000	/* DMC configuration */
-#define REALVIEW_PBX_SMC_BASE			0x100E1000	/* SMC configuration */
-#define REALVIEW_PBX_CAN_BASE			0x100E2000	/* CAN bus */
-#define REALVIEW_PBX_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_FLASH0_BASE		0x40000000
-#define REALVIEW_PBX_FLASH0_SIZE		SZ_64M
-#define REALVIEW_PBX_FLASH1_BASE		0x44000000
-#define REALVIEW_PBX_FLASH1_SIZE		SZ_64M
-#define REALVIEW_PBX_ETH_BASE			0x4E000000	/* Ethernet */
-#define REALVIEW_PBX_USB_BASE			0x4F000000	/* USB */
-#define REALVIEW_PBX_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
-#define REALVIEW_PBX_LT_BASE			0xC0000000	/* Logic Tile expansion */
-#define REALVIEW_PBX_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
-#define REALVIEW_PBX_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
-
-/*
- * Tile-specific addresses
- */
-#define REALVIEW_PBX_TILE_SCU_BASE		0x1F000000      /* SCU registers */
-#define REALVIEW_PBX_TILE_GIC_CPU_BASE		0x1F000100      /* Private Generic interrupt controller CPU interface */
-#define REALVIEW_PBX_TILE_TWD_BASE		0x1F000600
-#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE	0x1F000700
-#define REALVIEW_PBX_TILE_TWD_SIZE		0x00000100
-#define REALVIEW_PBX_TILE_GIC_DIST_BASE		0x1F001000      /* Private Generic interrupt controller distributor */
-#define REALVIEW_PBX_TILE_L220_BASE		0x1F002000      /* L220 registers */
-
-#define REALVIEW_PBX_SYS_PLD_CTRL1		0x74
-
-/*
- * PBX PCI regions
- */
-#define REALVIEW_PBX_PCI_BASE			0x90040000	/* PCI-X Unit base */
-#define REALVIEW_PBX_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
-#define REALVIEW_PBX_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
-
-#define REALVIEW_PBX_PCI_BASE_SIZE		0x10000		/* 16 Kb */
-#define REALVIEW_PBX_PCI_IO_SIZE		0x1000		/* 4 Kb */
-#define REALVIEW_PBX_PCI_MEM_SIZE		0x20000000	/* 512 MB */
-
-/*
- * Core tile identification (REALVIEW_SYS_PROCID)
- */
-#define REALVIEW_PBX_PROC_MASK          0xFF000000
-#define REALVIEW_PBX_PROC_ARM7TDMI      0x00000000
-#define REALVIEW_PBX_PROC_ARM9          0x02000000
-#define REALVIEW_PBX_PROC_ARM11         0x04000000
-#define REALVIEW_PBX_PROC_ARM11MP       0x06000000
-#define REALVIEW_PBX_PROC_A9MP          0x0C000000
-#define REALVIEW_PBX_PROC_A8            0x0E000000
-
-#define check_pbx_proc(proc_type)                                            \
-	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
-	== proc_type)
-
-#ifdef CONFIG_MACH_REALVIEW_PBX
-#define core_tile_pbx11mp()     check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
-#define core_tile_pbxa9mp()     check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
-#define core_tile_pbxa8()       check_pbx_proc(REALVIEW_PBX_PROC_A8)
-#else
-#define core_tile_pbx11mp()     0
-#define core_tile_pbxa9mp()     0
-#define core_tile_pbxa8()       0
-#endif
-
-#endif	/* __ASM_ARCH_BOARD_PBX_H */
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
deleted file mode 100644
index baf174542e36..000000000000
--- a/arch/arm/mach-realview/core.c
+++ /dev/null
@@ -1,404 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/core.c
- *
- *  Copyright (C) 1999 - 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/io.h>
-#include <linux/smsc911x.h>
-#include <linux/smc91x.h>
-#include <linux/ata_platform.h>
-#include <linux/amba/mmci.h>
-#include <linux/gfp.h>
-#include <linux/mtd/physmap.h>
-#include <linux/memblock.h>
-
-#include <clocksource/timer-sp804.h>
-#include "hardware.h"
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware/icst.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "platform.h"
-
-#include <plat/sched_clock.h>
-
-#include "core.h"
-
-#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)
-
-static void realview_flash_set_vpp(struct platform_device *pdev, int on)
-{
-	u32 val;
-
-	val = __raw_readl(REALVIEW_FLASHCTRL);
-	if (on)
-		val |= REALVIEW_FLASHPROG_FLVPPEN;
-	else
-		val &= ~REALVIEW_FLASHPROG_FLVPPEN;
-	__raw_writel(val, REALVIEW_FLASHCTRL);
-}
-
-static struct physmap_flash_data realview_flash_data = {
-	.width			= 4,
-	.set_vpp		= realview_flash_set_vpp,
-};
-
-struct platform_device realview_flash_device = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev			= {
-		.platform_data	= &realview_flash_data,
-	},
-};
-
-int realview_flash_register(struct resource *res, u32 num)
-{
-	realview_flash_device.resource = res;
-	realview_flash_device.num_resources = num;
-	return platform_device_register(&realview_flash_device);
-}
-
-static struct smsc911x_platform_config smsc911x_config = {
-	.flags		= SMSC911X_USE_32BIT,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,