MIPS: MT: Remove SMTC support

Nobody is maintaining SMTC anymore and there also seems to be no userbase.
Which is a pity - the SMTC technology primarily developed by Kevin D.
Kissell <kevink@paralogos.com> is an ingenious demonstration for the MT
ASE's power and elegance.

Based on Markos Chandras <Markos.Chandras@imgtec.com> patch
https://patchwork.linux-mips.org/patch/6719/ which while very similar did
no longer apply cleanly when I tried to merge it plus some additional
post-SMTC cleanup - SMTC was a feature as tricky to remove as it was to
merge once upon a time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

64 files changed, 71 insertions, 4096 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 45e75b6173b5..e3f040cbaff3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1852,7 +1852,7 @@ config FORCE_MAX_ZONEORDER
 
 config CEVT_GIC
 	bool "Use GIC global counter for clock events"
-	depends on IRQ_GIC && !(MIPS_SEAD3 || MIPS_MT_SMTC)
+	depends on IRQ_GIC && !MIPS_SEAD3
 	help
 	  Use the GIC global counter for the clock events. The R4K clock
 	  event driver is always present, so if the platform ends up not
@@ -1936,24 +1936,6 @@ config MIPS_MT_SMP
 	  Intel Hyperthreading feature. For further information go to
 	  <http://www.imgtec.com/mips/mips-multithreading.asp>.
 
-config MIPS_MT_SMTC
-	bool "Use all TCs on all VPEs for SMP (DEPRECATED)"
-	depends on CPU_MIPS32_R2
-	depends on SYS_SUPPORTS_MULTITHREADING
-	depends on !MIPS_CPS
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select MIPS_MT
-	select SMP
-	select SMP_UP
-	select SYS_SUPPORTS_SMP
-	select NR_CPUS_DEFAULT_8
-	help
-	  This is a kernel model which is known as SMTC. This is
-	  supported on cores with the MT ASE and presents all TCs
-	  available on all VPEs to support SMP. For further
-	  information see <http://www.linux-mips.org/wiki/34K#SMTC>.
-
 endchoice
 
 config MIPS_MT
@@ -1977,7 +1959,7 @@ config SYS_SUPPORTS_MULTITHREADING
 config MIPS_MT_FPAFF
 	bool "Dynamic FPU affinity for FP-intensive threads"
 	default y
-	depends on MIPS_MT_SMP || MIPS_MT_SMTC
+	depends on MIPS_MT_SMP
 
 config MIPS_VPE_LOADER
 	bool "VPE loader support."
@@ -1999,29 +1981,6 @@ config MIPS_VPE_LOADER_MT
 	default "y"
 	depends on MIPS_VPE_LOADER && !MIPS_CMP
 
-config MIPS_MT_SMTC_IM_BACKSTOP
-	bool "Use per-TC register bits as backstop for inhibited IM bits"
-	depends on MIPS_MT_SMTC
-	default n
-	help
-	  To support multiple TC microthreads acting as "CPUs" within
-	  a VPE, VPE-wide interrupt mask bits must be specially manipulated
-	  during interrupt handling. To support legacy drivers and interrupt
-	  controller management code, SMTC has a "backstop" to track and
-	  if necessary restore the interrupt mask. This has some performance
-	  impact on interrupt service overhead.
-
-config MIPS_MT_SMTC_IRQAFF
-	bool "Support IRQ affinity API"
-	depends on MIPS_MT_SMTC
-	default n
-	help
-	  Enables SMP IRQ affinity API (/proc/irq/*/smp_affinity, etc.)
-	  for SMTC Linux kernel. Requires platform support, of which
-	  an example can be found in the MIPS kernel i8259 and Malta
-	  platform code.  Adds some overhead to interrupt dispatch, and
-	  should be used only if you know what you are doing.
-
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
 	depends on MIPS_VPE_LOADER
@@ -2049,7 +2008,7 @@ config MIPS_VPE_APSP_API_MT
 
 config MIPS_CMP
 	bool "MIPS CMP framework support (DEPRECATED)"
-	depends on SYS_SUPPORTS_MIPS_CMP && !MIPS_MT_SMTC
+	depends on SYS_SUPPORTS_MIPS_CMP
 	select MIPS_GIC_IPI
 	select SYNC_R4K
 	select WEAK_ORDERING
@@ -2256,7 +2215,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
+	depends on PERF_EVENTS && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON || CPU_XLP)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 25de29211d76..3a2b775e8458 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -79,15 +79,6 @@ config CMDLINE_OVERRIDE
 
 	  Normally, you will choose 'N' here.
 
-config SMTC_IDLE_HOOK_DEBUG
-	bool "Enable additional debug checks before going into CPU idle loop"
-	depends on DEBUG_KERNEL && MIPS_MT_SMTC
-	help
-	  This option enables Enable additional debug checks before going into
-	  CPU idle loop.  For details on these checks, see
-	  arch/mips/kernel/smtc.c.  This debugging option result in significant
-	  overhead so should be disabled in production kernels.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/configs/maltasmtc_defconfig b/arch/mips/configs/maltasmtc_defconfig
deleted file mode 100644
index eb316447588c..000000000000
--- a/arch/mips/configs/maltasmtc_defconfig
+++ /dev/null
@@ -1,196 +0,0 @@
-CONFIG_MIPS_MALTA=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_PAGE_SIZE_16KB=y
-CONFIG_MIPS_MT_SMTC=y
-# CONFIG_MIPS_MT_FPAFF is not set
-CONFIG_NR_CPUS=9
-CONFIG_HZ_48=y
-CONFIG_LOCALVERSION="smtc"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PCI=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-# CONFIG_INET_LRO is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_CLS_IND=y
-# CONFIG_WIRELESS is not set
-CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_IDE=y
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_ADAPTEC is not set
-# CONFIG_NET_VENDOR_ALTEON is not set
-CONFIG_PCNET32=y
-# CONFIG_NET_VENDOR_ATHEROS is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_BROCADE is not set
-# CONFIG_NET_VENDOR_CHELSIO is not set
-# CONFIG_NET_VENDOR_CISCO is not set
-# CONFIG_NET_VENDOR_DEC is not set
-# CONFIG_NET_VENDOR_DLINK is not set
-# CONFIG_NET_VENDOR_EMULEX is not set
-# CONFIG_NET_VENDOR_EXAR is not set
-# CONFIG_NET_VENDOR_HP is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MELLANOX is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MYRI is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_NVIDIA is not set
-# CONFIG_NET_VENDOR_OKI is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_VENDOR_QLOGIC is not set
-# CONFIG_NET_VENDOR_REALTEK is not set
-# CONFIG_NET_VENDOR_RDC is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SILAN is not set
-# CONFIG_NET_VENDOR_SIS is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_SUN is not set
-# CONFIG_NET_VENDOR_TEHUTI is not set
-# CONFIG_NET_VENDOR_TI is not set
-# CONFIG_NET_VENDOR_TOSHIBA is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_WLAN is not set
-# CONFIG_VT is not set
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_G=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_FTRACE is not set
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index b464b8b1147a..f7db79a846bb 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -17,26 +17,8 @@
 #ifdef CONFIG_64BIT
 #include <asm/asmmacro-64.h>
 #endif
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-#endif
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	.macro	local_irq_enable reg=t0
-	mfc0	\reg, CP0_TCSTATUS
-	ori	\reg, \reg, TCSTATUS_IXMT
-	xori	\reg, \reg, TCSTATUS_IXMT
-	mtc0	\reg, CP0_TCSTATUS
-	_ehb
-	.endm
 
-	.macro	local_irq_disable reg=t0
-	mfc0	\reg, CP0_TCSTATUS
-	ori	\reg, \reg, TCSTATUS_IXMT
-	mtc0	\reg, CP0_TCSTATUS
-	_ehb
-	.endm
-#elif defined(CONFIG_CPU_MIPSR2)
+#ifdef CONFIG_CPU_MIPSR2
 	.macro	local_irq_enable reg=t0
 	ei
 	irq_enable_hazard
@@ -71,7 +53,7 @@
 	sw      \reg, TI_PRE_COUNT($28)
 #endif
 	.endm
-#endif /* CONFIG_MIPS_MT_SMTC */
+#endif /* CONFIG_CPU_MIPSR2 */
 
 	.macro	fpu_save_16even thread tmp=t0
 	cfc1	\tmp, fcr31
diff --git a/arch/mips/include/asm/cpu-info.h b/arch/mips/include/asm/cpu-info.h
index dc2135be2a3a..7ba0e07a9091 100644
--- a/arch/mips/include/asm/cpu-info.h
+++ b/arch/mips/include/asm/cpu-info.h
@@ -65,18 +65,13 @@ struct cpuinfo_mips {
 #ifdef CONFIG_64BIT
 	int			vmbits; /* Virtual memory size in bits */
 #endif
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 	/*
-	 * In the MIPS MT "SMTC" model, each TC is considered
-	 * to be a "CPU" for the purposes of scheduling, but
-	 * exception resources, ASID spaces, etc, are common
-	 * to all TCs within the same VPE.
+	 * There is not necessarily a 1:1 mapping of VPE num to CPU number
+	 * in particular on multi-core systems.
 	 */
 	int			vpe_id;	 /* Virtual Processor number */
 #endif
-#ifdef CONFIG_MIPS_MT_SMTC
-	int			tc_id;	 /* Thread Context number */
-#endif
 	void			*data;	/* Additional data */
 	unsigned int		watch_reg_count;   /* Number that exist */
 	unsigned int		watch_reg_use_cnt; /* Usable by ptrace */
@@ -117,7 +112,7 @@ struct proc_cpuinfo_notifier_args {
 	unsigned long n;
 };
 
-#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_MIPS_MT_SMP
 # define cpu_vpe_id(cpuinfo)	((cpuinfo)->vpe_id)
 #else
 # define cpu_vpe_id(cpuinfo)	0
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 8c012af2f451..6842ffafd1e7 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -48,11 +48,7 @@
 enum fixed_addresses {
 #define FIX_N_COLOURS 8
 	FIX_CMAP_BEGIN,
-#ifdef CONFIG_MIPS_MT_SMTC
-	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS * 2),
-#else
 	FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * 2),
-#endif
 #ifdef CONFIG_HIGHMEM
 	/* reserved pte's for temporary kernel mappings */
 	FIX_KMAP_BEGIN = FIX_CMAP_END + 1,
diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h
index 7bc2cdb35057..ae1f7b24dd1a 100644
--- a/arch/mips/include/asm/irq.h
+++ b/arch/mips/include/asm/irq.h
@@ -26,104 +26,8 @@ static inline int irq_canonicalize(int irq)
 #define irq_canonicalize(irq) (irq)	/* Sane hardware, sane code ... */
 #endif
 
-#ifdef CONFIG_MIPS_MT_SMTC
-
-struct irqaction;
-
-extern unsigned long irq_hwmask[];
-extern int setup_irq_smtc(unsigned int irq, struct irqaction * new,
-			  unsigned long hwmask);
-
-static inline void smtc_im_ack_irq(unsigned int irq)
-{
-	if (irq_hwmask[irq] & ST0_IM)
-		set_c0_status(irq_hwmask[irq] & ST0_IM);
-}
-
-#else
-
-static inline void smtc_im_ack_irq(unsigned int irq)
-{
-}
-
-#endif /* CONFIG_MIPS_MT_SMTC */
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-#include <linux/cpumask.h>
-
-extern int plat_set_irq_affinity(struct irq_data *d,
-				 const struct cpumask *affinity, bool force);
-extern void smtc_forward_irq(struct irq_data *d);
-
-/*
- * IRQ affinity hook invoked at the beginning of interrupt dispatch
- * if option is enabled.
- *
- * Up through Linux 2.6.22 (at least) cpumask operations are very
- * inefficient on MIPS.	 Initial prototypes of SMTC IRQ affinity
- * used a "fast path" per-IRQ-descriptor cache of affinity information
- * to reduce latency.  As there is a project afoot to optimize the
- * cpumask implementations, this version is optimistically assuming
- * that cpumask.h macro overhead is reasonable during interrupt dispatch.
- */
-static inline int handle_on_other_cpu(unsigned int irq)
-{
-	struct irq_data *d = irq_get_irq_data(irq);
-
-	if (cpumask_test_cpu(smp_processor_id(), d->affinity))
-		return 0;
-	smtc_forward_irq(d);
-	return 1;
-}
-
-#else /* Not doing SMTC affinity */
-
-static inline int handle_on_other_cpu(unsigned int irq) { return 0; }
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
-#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
-
-static inline void smtc_im_backstop(unsigned int irq)
-{
-	if (irq_hwmask[irq] & 0x0000ff00)
-		write_c0_tccontext(read_c0_tccontext() &
-				   ~(irq_hwmask[irq] & 0x0000ff00));
-}
-
-/*
- * Clear interrupt mask handling "backstop" if irq_hwmask
- * entry so indicates. This implies that the ack() or end()
- * functions will take over re-enabling the low-level mask.
- * Otherwise it will be done on return from exception.
- */
-static inline int smtc_handle_on_other_cpu(unsigned int irq)
-{
-	int ret = handle_on_other_cpu(irq);
-
-	if (!ret)
-		smtc_im_backstop(irq);
-	return ret;
-}
-
-#else
-
-static inline void smtc_im_backstop(unsigned int irq) { }
-static inline int smtc_handle_on_other_cpu(unsigned int irq)
-{
-	return handle_on_other_cpu(irq);
-}
-
-#endif
-
 extern void do_IRQ(unsigned int irq);
 
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-
-extern void do_IRQ_no_affinity(unsigned int irq);
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
 extern void arch_init_irq(void);
 extern void spurious_interrupt(void);
 
diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h
index 45c00951888b..0fa5fdcd1f01 100644
--- a/arch/mips/include/asm/irqflags.h
+++ b/arch/mips/include/asm/irqflags.h
@@ -17,7 +17,7 @@
 #include <linux/stringify.h>
 #include <asm/hazards.h>
 
-#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
+#ifdef CONFIG_CPU_MIPSR2
 
 static inline void arch_local_irq_disable(void)
 {
@@ -118,30 +118,15 @@ void arch_local_irq_disable(void);
 unsigned long arch_local_irq_save(void);
 void arch_local_irq_restore(unsigned long flags);
 void __arch_local_irq_restore(unsigned long flags);
-#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
-
-
-extern void smtc_ipi_replay(void);
+#endif /* CONFIG_CPU_MIPSR2 */
 
 static inline void arch_local_irq_enable(void)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of call overhead on each local_irq_enable()
-	 */
-	smtc_ipi_replay();
-#endif
 	__asm__ __volatile__(
 	"	.set	push						\n"
 	"	.set	reorder						\n"
 	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1	# SMTC - clear TCStatus.IXMT	\n"
-	"	ori	$1, 0x400					\n"
-	"	xori	$1, 0x400					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
+#if   defined(CONFIG_CPU_MIPSR2)
 	"	ei							\n"
 #else
 	"	mfc0	$1,$12						\n"
@@ -163,11 +148,7 @@ static inline unsigned long arch_local_save_flags(void)
 	asm __volatile__(
 	"	.set	push						\n"
 	"	.set	reorder						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	%[flags], $2, 1					\n"
-#else
 	"	mfc0	%[flags], $12					\n"
-#endif
 	"	.set	pop						\n"
 	: [flags] "=r" (flags));
 
@@ -177,14 +158,7 @@ static inline unsigned long arch_local_save_flags(void)
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC model uses TCStatus.IXMT to disable interrupts for a thread/CPU
-	 */
-	return flags & 0x400;
-#else
 	return !(flags & 1);
-#endif
 }
 
 #endif /* #ifndef __ASSEMBLY__ */
diff --git a/arch/mips/include/asm/mach-malta/kernel-entry-init.h b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
index 7c5e17a17849..77eeda77e73c 100644
--- a/arch/mips/include/asm/mach-malta/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-malta/kernel-entry-init.h
@@ -80,36 +80,6 @@
 	.endm
 
 	.macro	kernel_entry_setup
-#ifdef CONFIG_MIPS_MT_SMTC
-	mfc0	t0, CP0_CONFIG
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 1
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 2
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 3
-	and	t0, 1<<2
-	bnez	t0, 0f
-9:
-	/* Assume we came from YAMON... */
-	PTR_LA	v0, 0x9fc00534	/* YAMON print */
-	lw	v0, (v0)
-	move	a0, zero
-	PTR_LA	a1, nonmt_processor
-	jal	v0
-
-	PTR_LA	v0, 0x9fc00520	/* YAMON exit */
-	lw	v0, (v0)
-	li	a0, 1
-	jal	v0
-
-1:	b	1b
-
-	__INITDATA
-nonmt_processor:
-	.asciz	"SMTC kernel requires the MT ASE to run\n"
-	__FINIT
-#endif
 
 #ifdef CONFIG_EVA
 	sync
diff --git a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
index 3dfbd8e7947f..6cccd4d558d7 100644
--- a/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
+++ b/arch/mips/include/asm/mach-sead3/kernel-entry-init.h
@@ -10,37 +10,6 @@
 #define __ASM_MACH_MIPS_KERNEL_ENTRY_INIT_H
 
 	.macro	kernel_entry_setup
-#ifdef CONFIG_MIPS_MT_SMTC
-	mfc0	t0, CP0_CONFIG
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 1
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 2
-	bgez	t0, 9f
-	mfc0	t0, CP0_CONFIG, 3
-	and	t0, 1<<2
-	bnez	t0, 0f
-9 :
-	/* Ass