Merge tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "This series is larger than I would like to submit for -rc4. My
  original intent were to sent it to either -rc2 or -rc3. Unfortunately,
  due to my vacations, I got a lot of pending stuff after my return, and
  had to do some biz trips, with prevented me to send this earlier.

  Several fixes:

   - some fixes at atomisp staging driver

   - several gcc 7 warning fixes

   - cleanup media SVG files, in order to fix PDF build on some distros

   - fix random Kconfig build of venus driver

   - some fixes for the venus driver

   - some changes from semaphone to mutex in ngene's driver

   - some locking fixes at dib0700 driver

   - several fixes on ngene's driver and frontends to make it properly
     support some new boards added on Kernel 4.13

   - some fixes to CEC drivers

   - omap_vout: vrfb: convert to dmaengine

   - docs-rst: document EBUSY for VIDIOC_S_FMT

  Please notice that the big diffstat changes here are at the SVG files.

  Visually, the images look the same, but the file size is now a lot
  smaller than before, and they don't use some XML tags that would cause
  them to be badly parsed by some ImageMagick versions, or to require a
  lot of memory by TeTex, with would break PDF output on some
  distributions"

* tag 'media/v4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (68 commits)
  media: atomisp2: array underflow in imx_enum_frame_size()
  media: atomisp2: array underflow in ap1302_enum_frame_size()
  media: atomisp2: Array underflow in atomisp_enum_input()
  media: platform: davinci: drop VPFE_CMD_S_CCDC_RAW_PARAMS
  media: platform: davinci: return -EINVAL for VPFE_CMD_S_CCDC_RAW_PARAMS ioctl
  media: venus: don't abuse dma_alloc for non-DMA allocations
  media: venus: hfi: fix error handling in hfi_sys_init_done()
  media: venus: fix compile-test build on non-qcom ARM platform
  media: venus: mark PM functions as __maybe_unused
  media: cec-notifier: small improvements
  media: pulse8-cec: persistent_config should be off by default
  media: cec: cec_transmit_attempt_done: ignore CEC_TX_STATUS_MAX_RETRIES
  media: staging: atomisp: array underflow in ioctl
  media: lirc: LIRC_GET_REC_RESOLUTION should return microseconds
  media: svg: avoid too long lines
  media: svg files: simplify files
  media: selection.svg: simplify the SVG file
  media: vimc: set id_table for platform drivers
  media: staging: atomisp: disable warnings with cc-disable-warning
  media: davinci: variable 'common' set but not used
  ...

20 files changed, 4320 insertions, 13291 deletions

diff --git a/Documentation/media/kapi/dtv-core.rst b/Documentation/media/kapi/dtv-core.rst
index ff86bf0abeae..de9a228aca8a 100644
--- a/Documentation/media/kapi/dtv-core.rst
+++ b/Documentation/media/kapi/dtv-core.rst
@@ -1,6 +1,31 @@
 Digital TV (DVB) devices
 ------------------------
 
+Digital TV devices are implemented by several different drivers:
+
+- A bridge driver that is responsible to talk with the bus where the other
+  devices are connected (PCI, USB, SPI), bind to the other drivers and
+  implement the digital demux logic (either in software or in hardware);
+
+- Frontend drivers that are usually implemented as two separate drivers:
+
+  - A tuner driver that implements the logic with commands the part of the
+    hardware with is reponsible to tune into a digital TV transponder or
+    physical channel. The output of a tuner is usually a baseband or
+    Intermediate Frequency (IF) signal;
+
+  - A demodulator driver (a.k.a "demod") that implements the logic with
+    commands the digital TV decoding hardware. The output of a demod is
+    a digital stream, with multiple audio, video and data channels typically
+    multiplexed using MPEG Transport Stream [#f1]_.
+
+On most hardware, the frontend drivers talk with the bridge driver using an
+I2C bus.
+
+.. [#f1] Some standards use TCP/IP for multiplexing data, like DVB-H (an
+   abandoned standard, not used anymore) and ATSC version 3.0 current
+   proposals. Currently, the DVB subsystem doesn't implement those standards.
+
 Digital TV Common functions
 ---------------------------
 
@@ -55,8 +80,141 @@ Digital TV Frontend
 The Digital TV Frontend kABI defines a driver-internal interface for
 registering low-level, hardware specific driver to a hardware independent
 frontend layer. It is only of interest for Digital TV device driver writers.
-The header file for this API is named dvb_frontend.h and located in
-drivers/media/dvb-core.
+The header file for this API is named ``dvb_frontend.h`` and located in
+``drivers/media/dvb-core``.
+
+Demodulator driver
+^^^^^^^^^^^^^^^^^^
+
+The demodulator driver is responsible to talk with the decoding part of the
+hardware. Such driver should implement :c:type:`dvb_frontend_ops`, with
+tells what type of digital TV standards are supported, and points to a
+series of functions that allow the DVB core to command the hardware via
+the code under ``drivers/media/dvb-core/dvb_frontend.c``.
+
+A typical example of such struct in a driver ``foo`` is::
+
+	static struct dvb_frontend_ops foo_ops = {
+		.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
+		.info = {
+			.name	= "foo DVB-T/T2/C driver",
+			.caps = FE_CAN_FEC_1_2 |
+				FE_CAN_FEC_2_3 |
+				FE_CAN_FEC_3_4 |
+				FE_CAN_FEC_5_6 |
+				FE_CAN_FEC_7_8 |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK |
+				FE_CAN_QAM_16 |
+				FE_CAN_QAM_32 |
+				FE_CAN_QAM_64 |
+				FE_CAN_QAM_128 |
+				FE_CAN_QAM_256 |
+				FE_CAN_QAM_AUTO |
+				FE_CAN_TRANSMISSION_MODE_AUTO |
+				FE_CAN_GUARD_INTERVAL_AUTO |
+				FE_CAN_HIERARCHY_AUTO |
+				FE_CAN_MUTE_TS |
+				FE_CAN_2G_MODULATION,
+			.frequency_min = 42000000, /* Hz */
+			.frequency_max = 1002000000, /* Hz */
+			.symbol_rate_min = 870000,
+			.symbol_rate_max = 11700000
+		},
+		.init = foo_init,
+		.sleep = foo_sleep,
+		.release = foo_release,
+		.set_frontend = foo_set_frontend,
+		.get_frontend = foo_get_frontend,
+		.read_status = foo_get_status_and_stats,
+		.tune = foo_tune,
+		.i2c_gate_ctrl = foo_i2c_gate_ctrl,
+		.get_frontend_algo = foo_get_algo,
+	};
+
+A typical example of such struct in a driver ``bar`` meant to be used on
+Satellite TV reception is::
+
+	static const struct dvb_frontend_ops bar_ops = {
+		.delsys = { SYS_DVBS, SYS_DVBS2 },
+		.info = {
+			.name		= "Bar DVB-S/S2 demodulator",
+			.frequency_min	= 500000, /* KHz */
+			.frequency_max	= 2500000, /* KHz */
+			.frequency_stepsize	= 0,
+			.symbol_rate_min = 1000000,
+			.symbol_rate_max = 45000000,
+			.symbol_rate_tolerance = 500,
+			.caps = FE_CAN_INVERSION_AUTO |
+				FE_CAN_FEC_AUTO |
+				FE_CAN_QPSK,
+		},
+		.init = bar_init,
+		.sleep = bar_sleep,
+		.release = bar_release,
+		.set_frontend = bar_set_frontend,
+		.get_frontend = bar_get_frontend,
+		.read_status = bar_get_status_and_stats,
+		.i2c_gate_ctrl = bar_i2c_gate_ctrl,
+		.get_frontend_algo = bar_get_algo,
+		.tune = bar_tune,
+
+		/* Satellite-specific */
+		.diseqc_send_master_cmd = bar_send_diseqc_msg,
+		.diseqc_send_burst = bar_send_burst,
+		.set_tone = bar_set_tone,
+		.set_voltage = bar_set_voltage,
+	};
+
+.. note::
+
+   #) For satellite digital TV standards (DVB-S, DVB-S2, ISDB-S), the
+      frequencies are specified in kHz, while, for terrestrial and cable
+      standards, they're specified in Hz. Due to that, if the same frontend
+      supports both types, you'll need to have two separate
+      :c:type:`dvb_frontend_ops` structures, one for each standard.
+   #) The ``.i2c_gate_ctrl`` field is present only when the hardware has
+      allows controlling an I2C gate (either directly of via some GPIO pin),
+      in order to remove the tuner from the I2C bus after a channel is
+      tuned.
+   #) All new drivers should implement the
+      :ref:`DVBv5 statistics <dvbv5_stats>` via ``.read_status``.
+      Yet, there are a number of callbacks meant to get statistics for
+      signal strength, S/N and UCB. Those are there to provide backward
+      compatibility with legacy applications that don't support the DVBv5
+      API. Implementing those callbacks are optional. Those callbacks may be
+      removed in the future, after we have all existing drivers supporting
+      DVBv5 stats.
+   #) Other callbacks are required for satellite TV standards, in order to
+      control LNBf and DiSEqC: ``.diseqc_send_master_cmd``,
+      ``.diseqc_send_burst``, ``.set_tone``, ``.set_voltage``.
+
+.. |delta|   unicode:: U+00394
+
+The ``drivers/media/dvb-core/dvb_frontend.c`` has a kernel thread with is
+responsible for tuning the device. It supports multiple algoritms to
+detect a channel, as defined at enum :c:func:`dvbfe_algo`.
+
+The algorithm to be used is obtained via ``.get_frontend_algo``. If the driver
+doesn't fill its field at struct :c:type:`dvb_frontend_ops`, it will default to
+``DVBFE_ALGO_SW``, meaning that the dvb-core will do a zigzag when tuning,
+e. g. it will try first to use the specified center frequency ``f``,
+then, it will do ``f`` + |delta|, ``f`` - |delta|, ``f`` + 2 x |delta|,
+``f`` - 2 x |delta| and so on.
+
+If the hardware has internally a some sort of zigzag algorithm, you should
+define a ``.get_frontend_algo`` function that would return ``DVBFE_ALGO_HW``.
+
+.. note::
+
+   The core frontend support also supports
+   a third type (``DVBFE_ALGO_CUSTOM``), in order to allow the driver to
+   define its own hardware-assisted algorithm. Very few hardware need to
+   use it nowadays. Using ``DVBFE_ALGO_CUSTOM`` require to provide other
+   function callbacks at struct :c:type:`dvb_frontend_ops`.
+
+Attaching frontend driver to the bridge driver
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Before using the Digital TV frontend core, the bridge driver should attach
 the frontend demod, tuner and SEC devices and call
@@ -74,6 +232,287 @@ part of their handler for :c:type:`device_driver`.\ ``resume()``.
 
 A few other optional functions are provided to handle some special cases.
 
+.. _dvbv5_stats:
+
+Digital TV Frontend statistics
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Introduction
+^^^^^^^^^^^^
+
+Digital TV frontends provide a range of
+:ref:`statistics <frontend-stat-properties>` meant to help tuning the device
+and measuring the quality of service.
+
+For each statistics measurement, the driver should set the type of scale used,
+or ``FE_SCALE_NOT_AVAILABLE`` if the statistics is not available on a given
+time. Drivers should also provide the number of statistics for each type.
+that's usually 1 for most video standards [#f2]_.
+
+Drivers should initialize each statistic counters with length and
+scale at its init code. For example, if the frontend provides signal
+strength, it should have, on its init code::
+
+	struct dtv_frontend_properties *c = &state->fe.dtv_property_cache;
+
+	c->strength.len = 1;
+	c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
+
+And, when the statistics got updated, set the scale::
+
+	c->strength.stat[0].scale = FE_SCALE_DECIBEL;
+	c->strength.stat[0].uvalue = strength;
+
+.. [#f2] For ISDB-T, it may provide both a global statistics and a per-layer
+   set of statistics. On such cases, len should be equal to 4. The first
+   value corresponds to the global stat; the other ones to each layer, e. g.:
+
+   - c->cnr.stat[0] for global S/N carrier ratio,
+   - c->cnr.stat[1] for Layer A S/N carrier ratio,
+   - c->cnr.stat[2] for layer B S/N carrier ratio,
+   - c->cnr.stat[3] for layer C S/N carrier ratio.
+
+.. note:: Please prefer to use ``FE_SCALE_DECIBEL`` instead of
+   ``FE_SCALE_RELATIVE`` for signal strength and CNR measurements.
+
+Groups of statistics
+^^^^^^^^^^^^^^^^^^^^
+
+There are several groups of statistics currently supported:
+
+Signal strength (:ref:`DTV-STAT-SIGNAL-STRENGTH`)
+  - Measures the signal strength level at the analog part of the tuner or
+    demod.
+
+  - Typically obtained from the gain applied to the tuner and/or frontend
+    in order to detect the carrier. When no carrier is detected, the gain is
+    at the maximum value (so, strength is on its minimal).
+
+  - As the gain is visible through the set of registers that adjust the gain,
+    typically, this statistics is always available [#f3]_.
+
+  - Drivers should try to make it available all the times, as this statistics
+    can be used when adjusting an antenna position and to check for troubles
+    at the cabling.
+
+  .. [#f3] On a few devices, the gain keeps floating if no carrier.
+     On such devices, strength report should check first if carrier is
+     detected at the tuner (``FE_HAS_CARRIER``, see :c:type:`fe_status`),
+     and otherwise return the lowest possible value.
+
+Carrier Signal to Noise ratio (:ref:`DTV-STAT-CNR`)
+  - Signal to Noise ratio for the main carrier.
+
+  - Signal to Noise measurement depends on the device. On some hardware, is
+    available when the main carrier is detected. On those hardware, CNR
+    measurement usually comes from the tuner (e. g. after ``FE_HAS_CARRIER``,
+    see :c:type:`fe_status`).
+
+    On other devices, it requires inner FEC decoding,
+    as the frontend measures it indirectly from other parameters (e. g. after
+    ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+    Having it available after inner FEC is more common.
+
+Bit counts post-FEC (:ref:`DTV-STAT-POST-ERROR-BIT-COUNT` and :ref:`DTV-STAT-POST-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (after Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after ``FE_HAS_LOCK``,
+    see :c:type:`fe_status`).
+
+Bit counts pre-FEC (:ref:`DTV-STAT-PRE-ERROR-BIT-COUNT` and :ref:`DTV-STAT-PRE-TOTAL-BIT-COUNT`)
+  - Those counters measure the number of bits and bit errors errors before
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Not all frontends provide this kind of statistics.
+
+  - Due to its nature, those statistics depend on inner coding lock (e. g.
+    after ``FE_HAS_VITERBI``, see :c:type:`fe_status`).
+
+Block counts (:ref:`DTV-STAT-ERROR-BLOCK-COUNT` and :ref:`DTV-STAT-TOTAL-BLOCK-COUNT`)
+  - Those counters measure the number of blocks and block errors errors after
+    the forward error correction (FEC) on the inner coding block
+    (before Viterbi, LDPC or other inner code).
+
+  - Due to its nature, those statistics depend on full coding lock
+    (e. g. after ``FE_HAS_SYNC`` or after
+    ``FE_HAS_LOCK``, see :c:type:`fe_status`).
+
+.. note:: All counters should be monotonically increased as they're
+   collected from the hardware.
+
+A typical example of the logic that handle status and statistics is::
+
+	static int foo_get_status_and_stats(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+
+		int rc;
+		enum fe_status *status;
+
+		/* Both status and strength are always available */
+		rc = foo_read_status(fe, &status);
+		if (rc < 0)
+			return rc;
+
+		rc = foo_read_strength(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if CNR is available */
+		if (!(fe->status & FE_HAS_CARRIER))
+			return 0;
+
+		rc = foo_read_cnr(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if pre-BER stats are available */
+		if (!(fe->status & FE_HAS_VITERBI))
+			return 0;
+
+		rc = foo_get_pre_ber(fe);
+		if (rc < 0)
+			return rc;
+
+		/* Check if post-BER stats are available */
+		if (!(fe->status & FE_HAS_SYNC))
+			return 0;
+
+		rc = foo_get_post_ber(fe);
+		if (rc < 0)
+			return rc;
+	}
+
+	static const struct dvb_frontend_ops ops = {
+		/* ... */
+		.read_status = foo_get_status_and_stats,
+	};
+
+Statistics collect
+^^^^^^^^^^^^^^^^^^
+
+On almost all frontend hardware, the bit and byte counts are stored by
+the hardware after a certain amount of time or after the total bit/block
+counter reaches a certain value (usually programable), for example, on
+every 1000 ms or after receiving 1,000,000 bits.
+
+So, if you read the registers too soon, you'll end by reading the same
+value as in the previous reading, causing the monotonic value to be
+incremented too often.
+
+Drivers should take the responsibility to avoid too often reads. That
+can be done using two approaches:
+
+if the driver have a bit that indicates when a collected data is ready
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+Driver should check such bit before making the statistics available.
+
+An example of such behavior can be found at this code snippet (adapted
+from mb86a20s driver's logic)::
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+
+		/* Check if the BER measures are already available */
+		rc = foo_read_u8(state, 0x54);
+		if (rc < 0)
+			return rc;
+
+		if (!rc)
+			return 0;
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/* Read Total Bit Count */
+		rc = foo_read_u32(state, 0x51);
+		if (rc < 0)
+			return rc;
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += rc;
+
+		return 0;
+	}
+
+If the driver doesn't provide a statistics available check bit
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+A few devices, however, may not provide a way to check if the stats are
+available (or the way to check it is unknown). They may not even provide
+a way to directly read the total number of bits or blocks.
+
+On those devices, the driver need to ensure that it won't be reading from
+the register too often and/or estimate the total number of bits/blocks.
+
+On such drivers, a typical routine to get statistics would be like
+(adapted from dib8000 driver's logic)::
+
+	struct foo_state {
+		/* ... */
+
+		unsigned long per_jiffies_stats;
+	}
+
+	static int foo_get_pre_ber(struct dvb_frontend *fe)
+	{
+		struct foo_state *state = fe->demodulator_priv;
+		struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+		int rc, bit_error;
+		u64 bits;
+
+		/* Check if time for stats was elapsed */
+		if (!time_after(jiffies, state->per_jiffies_stats))
+			return 0;
+
+		/* Next stat should be collected in 1000 ms */
+		state->per_jiffies_stats = jiffies + msecs_to_jiffies(1000);
+
+		/* Read Bit Error Count */
+		bit_error = foo_read_u32(state, 0x55);
+		if (bit_error < 0)
+			return bit_error;
+
+		/*
+		 * On this particular frontend, there's no register that
+		 * would provide the number of bits per 1000ms sample. So,
+		 * some function would calculate it based on DTV properties
+		 */
+		bits = get_number_of_bits_per_1000ms(fe);
+
+		c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_error.stat[0].uvalue += bit_error;
+		c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER;
+		c->pre_bit_count.stat[0].uvalue += bits;
+
+		return 0;
+	}
+
+Please notice that, on both cases, we're getting the statistics using the
+:c:type:`dvb_frontend_ops` ``.read_status`` callback. The rationale is that
+the frontend core will automatically call this function periodically
+(usually, 3 times per second, when the frontend is locked).
+
+That warrants that we won't miss to collect a counter and increment the
+monotonic stats at the right time.
+
+Digital TV Frontend functions and types
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
 .. kernel-doc:: drivers/media/dvb-core/dvb_frontend.h
 
 
diff --git a/Documentation/media/typical_media_device.svg b/Documentation/media/typical_media_device.svg
index 0c8abd69f39a..d6fad90ec199 100644
--- a/Documentation/media/typical_media_device.svg
+++ b/Documentation/media/typical_media_device.svg
@@ -1,2948 +1,106 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
-   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
-   clip-path="url(#a)"
-   xml:space="preserve"
-   height="179mm"
-   viewBox="0 0 22648.239 17899.829"
-   width="235mm"
-   version="1.2"
-   preserveAspectRatio="xMidYMid"
-   id="svg2"
-   inkscape:version="0.91 r13725"
-   sodipodi:docname="typical_media_device.svg"
-   style="fill-rule:evenodd;stroke-width:28.22200012;stroke-linejoin:round"><metadata
-     id="metadata1533"><rdf:RDF><cc:Work
-         rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title /></cc:Work></rdf:RDF></metadata><sodipodi:namedview
-     pagecolor="#ffffff"
-     bordercolor="#666666"
-     borderopacity="1"
-     objecttolerance="10"
-     gridtolerance="10"
-     guidetolerance="10"
-     inkscape:pageopacity="0"
-     inkscape:pageshadow="2"
-     inkscape:window-width="1920"
-     inkscape:window-height="997"
-     id="namedview1531"
-     showgrid="false"
-     fit-margin-top="0"
-     fit-margin-left="0"
-     fit-margin-right="0"
-     fit-margin-bottom="0"
-     inkscape:zoom="1.2707744"
-     inkscape:cx="410.32614"
-     inkscape:cy="316.736"
-     inkscape:window-x="1920"
-     inkscape:window-y="30"
-     inkscape:window-maximized="1"
-     inkscape:current-layer="svg2" /><defs
-     id="defs4"><clipPath
-       id="a"
-       clipPathUnits="userSpaceOnUse"><rect
-         y="0"
-         x="0"
-         width="28000"
-         height="21000"
-         id="rect7" /></clipPath></defs><path
-     style="fill:#ffccff"
-     inkscape:connector-curvature="0"
-     id="path11"
-     d="m 10145.77,2636.013 c -518.0641,0 -1035.1241,515 -1035.1241,1031 l 0,4124 c 0,516 517.06,1032 1035.1241,1032 l 8572.152,0 c 518.064,0 1036.128,-516 1036.128,-1032 l 0,-4124 c 0,-516 -518.064,-1031 -1036.128,-1031 l -8572.152,0 z" /><path
-     style="fill:#ffffcc"
-     inkscape:connector-curvature="0"
-     id="path15"
-     d="m 1505.5459,13443.013 c -293,0 -585,292 -585,585 l 0,2340 c 0,293 292,586 585,586 l 3275,0 c 293,0 586,-293 586,-586 l 0,-2340 c 0,-293 -293,-585 -586,-585 l -3275,0 z" /><path
-     style="fill:#e6e6e6"
-     inkscape:connector-curvature="0"
-     id="path19"
-     d="m 517.1459,22.013 c -461,0 -922,461 -922,922 l 0,11169 c 0,461 461,923 922,923 l 3692,0 c 461,0 922,-462 922,-923 l 0,-11169 c 0,-461 -461,-922 -922,-922 l -3692,0 z" /><path
-     style="fill:#ff8080"
-     inkscape:connector-curvature="0"
-     id="path23"
-     d="m 2371.5459,6438.013 -2260,0 0,-1086 4520,0 0,1086 -2260,0 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path25"
-     d="m 2371.5459,6438.013 -2260,0 0,-1086 4520,0 0,1086 -2260,0 z" /><text
-     id="text27"
-     class="TextShape"
-     x="-2089.4541"
-     y="-2163.9871"><tspan
-       style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
-       id="tspan29"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="635px"><tspan
-         id="tspan31"
-         class="TextPosition"
-         x="489.5459"
-         y="6111.0132"><tspan
-           style="fill:#000000"
-           id="tspan33">Audio decoder</tspan></tspan></tspan></text>
-<path
-     style="fill:#ff8080"
-     inkscape:connector-curvature="0"
-     id="path37"
-     d="m 2371.5459,9608.013 -2260,0 0,-1270 4520,0 0,1270 -2260,0 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path39"
-     d="m 2371.5459,9608.013 -2260,0 0,-1270 4520,0 0,1270 -2260,0 z" /><text
-     id="text41"
-     class="TextShape"
-     x="-2089.4541"
-     y="-2163.9871"><tspan
-       style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
-       id="tspan43"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="635px"><tspan
-         id="tspan45"
-         class="TextPosition"
-         x="527.5459"
-         y="9189.0127"><tspan
-           style="fill:#000000"
-           id="tspan47">Video decoder</tspan></tspan></tspan></text>
-<path
-     style="fill:#ff8080"
-     inkscape:connector-curvature="0"
-     id="path51"
-     d="m 2363.5459,8053.013 -2269,0 0,-1224 4537,0 0,1224 -2268,0 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path53"
-     d="m 2363.5459,8053.013 -2269,0 0,-1224 4537,0 0,1224 -2268,0 z" /><text
-     id="text55"
-     class="TextShape"
-     x="-2089.4541"
-     y="-2163.9871"><tspan
-       style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
-       id="tspan57"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="635px"><tspan
-         id="tspan59"
-         class="TextPosition"
-         x="481.5459"
-         y="7657.0132"><tspan
-           style="fill:#000000"
-           id="tspan61">Audio encoder</tspan></tspan></tspan></text>
-<path
-     style="fill:#ccffcc"
-     inkscape:connector-curvature="0"
-     id="path65"
-     d="m 13621.546,10385.813 -3810.0001,0 0,-1281 7620.0001,0 0,1281 -3810,0 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path67"
-     d="m 13621.546,10385.813 -3810.0001,0 0,-1281 7620.0001,0 0,1281 -3810,0 z" /><text
-     id="text69"
-     class="TextShape"
-     x="-2089.4541"
-     y="-2446.187"><tspan
-       style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
-       id="tspan71"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="635px"><tspan
-         id="tspan73"
-         class="TextPosition"
-         x="10287.546"
-         y="9960.8135"><tspan
-           style="fill:#000000"
-           id="tspan75">Button Key/IR input logic</tspan></tspan></tspan></text>
-<path
-     style="fill:#cfe7f5"
-     inkscape:connector-curvature="0"
-     id="path79"
-     d="m 12079.546,12182.213 -2268.0001,0 0,-1412 4536.0001,0 0,1412 -2268,0 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path81"
-     d="m 12079.546,12182.213 -2268.0001,0 0,-1412 4536.0001,0 0,1412 -2268,0 z" /><text
-     id="text83"
-     class="TextShape"
-     x="-2089.4541"
-     y="-2389.7871"><tspan
-       style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
-       id="tspan85"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="635px"><tspan
-         id="tspan87"
-         class="TextPosition"
-         x="10792.546"
-         y="11692.213"><tspan
-           style="fill:#000000"
-           id="tspan89">EEPROM</tspan></tspan></tspan></text>
-<path
-     style="fill:#ffcc99"
-     inkscape:connector-curvature="0"
-     id="path93"
-     d="m 3050.5459,15498.013 -1563,0 0,-1715 3126,0 0,1715 -1563,0 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path95"
-     d="m 3050.5459,15498.013 -1563,0 0,-1715 3126,0 0,1715 -1563,0 z" /><text
-     id="text97"
-     class="TextShape"
-     x="-2089.4541"
-     y="-2163.9871"><tspan
-       style="font-weight:400;font-size:635px;font-family:'Times New Roman', serif"
-       id="tspan99"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="635px"><tspan
-         id="tspan101"
-         class="TextPosition"
-         x="2186.5459"
-         y="14856.013"><tspan
-           style="fill:#000000"
-           id="tspan103">Sensor</tspan></tspan></tspan></text>
-<path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path107"
-     d="m 4629.5459,5866.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path109"
-     d="m 4629.5459,5866.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path113"
-     d="m 4629.5459,7448.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path115"
-     d="m 4629.5459,7448.013 385,-353 0,176 1167,0 0,-176 386,353 -386,354 0,-177 -1167,0 0,177 -385,-354 z" /><path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path119"
-     d="m 4631.5459,8936.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path121"
-     d="m 4631.5459,8936.013 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path125"
-     d="m 7872.5459,11464.213 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path127"
-     d="m 7872.5459,11464.213 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path131"
-     d="m 7872.5459,9716.813 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path133"
-     d="m 7872.5459,9716.813 385,-353 0,176 1166,0 0,-176 386,353 -386,354 0,-177 -1166,0 0,177 -385,-354 z" /><path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path137"
-     d="m 7872.5459,14994.013 670,-353 0,176 2028.0001,0 0,-176 671,353 -671,354 0,-177 -2028.0001,0 0,177 -670,-354 z" /><path
-     style="fill:none;stroke:#3465af"
-     inkscape:connector-curvature="0"
-     id="path139"
-     d="m 7872.5459,14994.013 670,-353 0,176 2028.0001,0 0,-176 671,353 -671,354 0,-177 -2028.0001,0 0,177 -670,-354 z" /><path
-     style="fill:#729fcf"
-     inkscape:connector-curvature="0"
-     id="path143"
-     d="m 17534.058,14104.529 978.488,840.891 -978.488,840.89 0,-420.862 -2960.48,0 0,420.862 -979.489,-840.89 979.489,-840.891 0,420.029 2960.48,0 0,-420.029 z" /><path
-     style="fill:none;stroke:#3465af;stroke-width:25.77035904"
-     inkscape:connector-curvature="0"
-     id="path145"
-     d="m 17534.058,14104.529 978.488,840.891 -978.488,840.89 0,-420.862 -2960.48,0 0,420.862 -979.489,-840.89 979.489,-840.891 0,420.029 2960.48,0 0,-420.029 z" /><text
-     id="text149"
-     class="TextShape"
-     x="-9922.1533"
-     y="-644.58704"><tspan
-       style="font-weight:400;font-size:706px;font-family:'Times New Roman', serif"
-       id="tspan151"
-       class="TextParagraph"
-       font-weight="400"
-       font-size="706px"><tspan
-         id="tspan153"
-         transform="matrix(0,-1,1,0,8509,40173)"
-         class="TextPosition"
-         x="14418.847"
-         y="15187.413"><tspan
-           style="fill:#000000"
-           id="tspan155">System Bus</tspan></tspan></tspan></text>
-<path
-     style="fill:#ccff