Merge tag 'kvm-arm-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm

KVM/ARM Changes for v4.16

The changes for this version include icache invalidation optimizations
(improving VM startup time), support for forwarded level-triggered
interrupts (improved performance for timers and passthrough platform
devices), a small fix for power-management notifiers, and some cosmetic
changes.

37 files changed, 579 insertions, 362 deletions

diff --git a/Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt b/Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt
deleted file mode 100644
index 38bca2835278..000000000000
--- a/Documentation/virtual/kvm/arm/vgic-mapped-irqs.txt
+++ /dev/null
@@ -1,187 +0,0 @@
-KVM/ARM VGIC Forwarded Physical Interrupts
-==========================================
-
-The KVM/ARM code implements software support for the ARM Generic
-Interrupt Controller's (GIC's) hardware support for virtualization by
-allowing software to inject virtual interrupts to a VM, which the guest
-OS sees as regular interrupts.  The code is famously known as the VGIC.
-
-Some of these virtual interrupts, however, correspond to physical
-interrupts from real physical devices.  One example could be the
-architected timer, which itself supports virtualization, and therefore
-lets a guest OS program the hardware device directly to raise an
-interrupt at some point in time.  When such an interrupt is raised, the
-host OS initially handles the interrupt and must somehow signal this
-event as a virtual interrupt to the guest.  Another example could be a
-passthrough device, where the physical interrupts are initially handled
-by the host, but the device driver for the device lives in the guest OS
-and KVM must therefore somehow inject a virtual interrupt on behalf of
-the physical one to the guest OS.
-
-These virtual interrupts corresponding to a physical interrupt on the
-host are called forwarded physical interrupts, but are also sometimes
-referred to as 'virtualized physical interrupts' and 'mapped interrupts'.
-
-Forwarded physical interrupts are handled slightly differently compared
-to virtual interrupts generated purely by a software emulated device.
-
-
-The HW bit
-----------
-Virtual interrupts are signalled to the guest by programming the List
-Registers (LRs) on the GIC before running a VCPU.  The LR is programmed
-with the virtual IRQ number and the state of the interrupt (Pending,
-Active, or Pending+Active).  When the guest ACKs and EOIs a virtual
-interrupt, the LR state moves from Pending to Active, and finally to
-inactive.
-
-The LRs include an extra bit, called the HW bit.  When this bit is set,
-KVM must also program an additional field in the LR, the physical IRQ
-number, to link the virtual with the physical IRQ.
-
-When the HW bit is set, KVM must EITHER set the Pending OR the Active
-bit, never both at the same time.
-
-Setting the HW bit causes the hardware to deactivate the physical
-interrupt on the physical distributor when the guest deactivates the
-corresponding virtual interrupt.
-
-
-Forwarded Physical Interrupts Life Cycle
-----------------------------------------
-
-The state of forwarded physical interrupts is managed in the following way:
-
-  - The physical interrupt is acked by the host, and becomes active on
-    the physical distributor (*).
-  - KVM sets the LR.Pending bit, because this is the only way the GICV
-    interface is going to present it to the guest.
-  - LR.Pending will stay set as long as the guest has not acked the interrupt.
-  - LR.Pending transitions to LR.Active on the guest read of the IAR, as
-    expected.
-  - On guest EOI, the *physical distributor* active bit gets cleared,
-    but the LR.Active is left untouched (set).
-  - KVM clears the LR on VM exits when the physical distributor
-    active state has been cleared.
-
-(*): The host handling is slightly more complicated.  For some forwarded
-interrupts (shared), KVM directly sets the active state on the physical
-distributor before entering the guest, because the interrupt is never actually
-handled on the host (see details on the timer as an example below).  For other
-forwarded interrupts (non-shared) the host does not deactivate the interrupt
-when the host ISR completes, but leaves the interrupt active until the guest
-deactivates it.  Leaving the interrupt active is allowed, because Linux
-configures the physical GIC with EOIMode=1, which causes EOI operations to
-perform a priority drop allowing the GIC to receive other interrupts of the
-default priority.
-
-
-Forwarded Edge and Level Triggered PPIs and SPIs
-------------------------------------------------
-Forwarded physical interrupts injected should always be active on the
-physical distributor when injected to a guest.
-
-Level-triggered interrupts will keep the interrupt line to the GIC
-asserted, typically until the guest programs the device to deassert the
-line.  This means that the interrupt will remain pending on the physical
-distributor until the guest has reprogrammed the device.  Since we
-always run the VM with interrupts enabled on the CPU, a pending
-interrupt will exit the guest as soon as we switch into the guest,
-preventing the guest from ever making progress as the process repeats
-over and over.  Therefore, the active state on the physical distributor
-must be set when entering the guest, preventing the GIC from forwarding
-the pending interrupt to the CPU.  As soon as the guest deactivates the
-interrupt, the physical line is sampled by the hardware again and the host
-takes a new interrupt if and only if the physical line is still asserted.
-
-Edge-triggered interrupts do not exhibit the same problem with
-preventing guest execution that level-triggered interrupts do.  One
-option is to not use HW bit at all, and inject edge-triggered interrupts
-from a physical device as pure virtual interrupts.  But that would
-potentially slow down handling of the interrupt in the guest, because a
-physical interrupt occurring in the middle of the guest ISR would
-preempt the guest for the host to handle the interrupt.  Additionally,
-if you configure the system to handle interrupts on a separate physical
-core from that running your VCPU, you still have to interrupt the VCPU
-to queue the pending state onto the LR, even though the guest won't use
-this information until the guest ISR completes.  Therefore, the HW
-bit should always be set for forwarded edge-triggered interrupts.  With
-the HW bit set, the virtual interrupt is injected and additional
-physical interrupts occurring before the guest deactivates the interrupt
-simply mark the state on the physical distributor as Pending+Active.  As
-soon as the guest deactivates the interrupt, the host takes another
-interrupt if and only if there was a physical interrupt between injecting
-the forwarded interrupt to the guest and the guest deactivating the
-interrupt.
-
-Consequently, whenever we schedule a VCPU with one or more LRs with the
-HW bit set, the interrupt must also be active on the physical
-distributor.
-
-
-Forwarded LPIs
---------------
-LPIs, introduced in GICv3, are always edge-triggered and do not have an
-active state.  They become pending when a device signal them, and as
-soon as they are acked by the CPU, they are inactive again.
-
-It therefore doesn't make sense, and is not supported, to set the HW bit
-for physical LPIs that are forwarded to a VM as virtual interrupts,
-typically virtual SPIs.
-
-For LPIs, there is no other choice than to preempt the VCPU thread if
-necessary, and queue the pending state onto the LR.
-
-
-Putting It Together: The Architected Timer
-------------------------------------------
-The architected timer is a device that signals interrupts with level
-triggered semantics.  The timer hardware is directly accessed by VCPUs
-which program the timer to fire at some point in time.  Each VCPU on a
-system programs the timer to fire at different times, and therefore the
-hardware is multiplexed between multiple VCPUs.  This is implemented by
-context-switching the timer state along with each VCPU thread.
-
-However, this means that a scenario like the following is entirely
-possible, and in fact, typical:
-
-1.  KVM runs the VCPU
-2.  The guest programs the time to fire in T+100
-3.  The guest is idle and calls WFI (wait-for-interrupts)
-4.  The hardware traps to the host
-5.  KVM stores the timer state to memory and disables the hardware timer
-6.  KVM schedules a soft timer to fire in T+(100 - time since step 2)
-7.  KVM puts the VCPU thread to sleep (on a waitqueue)
-8.  The soft timer fires, waking up the VCPU thread
-9.  KVM reprograms the timer hardware with the VCPU's values
-10. KVM marks the timer interrupt as active on the physical distributor
-11. KVM injects a forwarded physical interrupt to the guest
-12. KVM runs the VCPU
-
-Notice that KVM injects a forwarded physical interrupt in step 11 without
-the corresponding interrupt having actually fired on the host.  That is
-exactly why we mark the timer interrupt as active in step 10, because
-the active state on the physical distributor is part of the state
-belonging to the timer hardware, which is context-switched along with
-the VCPU thread.
-
-If the guest does not idle because it is busy, the flow looks like this
-instead:
-
-1.  KVM runs the VCPU
-2.  The guest programs the time to fire in T+100
-4.  At T+100 the timer fires and a physical IRQ causes the VM to exit
-    (note that this initially only traps to EL2 and does not run the host ISR
-    until KVM has returned to the host).
-5.  With interrupts still disabled on the CPU coming back from the guest, KVM
-    stores the virtual timer state to memory and disables the virtual hw timer.
-6.  KVM looks at the timer state (in memory) and injects a forwarded physical
-    interrupt because it concludes the timer has expired.
-7.  KVM marks the timer interrupt as active on the physical distributor
-7.  KVM enables the timer, enables interrupts, and runs the VCPU
-
-Notice that again the forwarded physical interrupt is injected to the
-guest without having actually been handled on the host.  In this case it
-is because the physical interrupt is never actually seen by the host because the
-timer is disabled upon guest return, and the virtual forwarded interrupt is
-injected on the KVM guest entry path.
diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h
index 3d22eb87f919..9003bd19cb70 100644
--- a/arch/arm/include/asm/kvm_emulate.h
+++ b/arch/arm/include/asm/kvm_emulate.h
@@ -131,7 +131,7 @@ static inline bool mode_has_spsr(struct kvm_vcpu *vcpu)
 static inline bool vcpu_mode_priv(struct kvm_vcpu *vcpu)
 {
 	unsigned long cpsr_mode = vcpu->arch.ctxt.gp_regs.usr_regs.ARM_cpsr & MODE_MASK;
-	return cpsr_mode > USR_MODE;;
+	return cpsr_mode > USR_MODE;
 }
 
 static inline u32 kvm_vcpu_get_hsr(const struct kvm_vcpu *vcpu)
diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h
index a9f7d3f47134..6394fb99da7f 100644
--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@@ -48,6 +48,8 @@
 	KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 
+DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
+
 u32 *kvm_vcpu_reg(struct kvm_vcpu *vcpu, u8 reg_num, u32 mode);
 int __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h
index ab20ffa8b9e7..1ab8329e9ff7 100644
--- a/arch/arm/include/asm/kvm_hyp.h
+++ b/arch/arm/include/asm/kvm_hyp.h
@@ -21,7 +21,6 @@
 #include <linux/compiler.h>
 #include <linux/kvm_host.h>
 #include <asm/cp15.h>
-#include <asm/kvm_mmu.h>
 #include <asm/vfp.h>
 
 #define __hyp_text __section(.hyp.text) notrace
@@ -69,6 +68,8 @@
 #define HIFAR		__ACCESS_CP15(c6, 4, c0, 2)
 #define HPFAR		__ACCESS_CP15(c6, 4, c0, 4)
 #define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
+#define BPIALLIS	__ACCESS_CP15(c7, 0, c1, 6)
+#define ICIMVAU		__ACCESS_CP15(c7, 0, c5, 1)
 #define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
 #define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
 #define TLBIALL		__ACCESS_CP15(c8, 0, c7, 0)
diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h
index fa6f2174276b..bc70a1f0f42d 100644
--- a/arch/arm/include/asm/kvm_mmu.h
+++ b/arch/arm/include/asm/kvm_mmu.h
@@ -37,6 +37,8 @@
 
 #include <linux/highmem.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
+#include <asm/kvm_hyp.h>
 #include <asm/pgalloc.h>
 #include <asm/stage2_pgtable.h>
 
@@ -83,6 +85,18 @@ static inline pmd_t kvm_s2pmd_mkwrite(pmd_t pmd)
 	return pmd;
 }
 
+static inline pte_t kvm_s2pte_mkexec(pte_t pte)
+{
+	pte_val(pte) &= ~L_PTE_XN;
+	return pte;
+}
+
+static inline pmd_t kvm_s2pmd_mkexec(pmd_t pmd)
+{
+	pmd_val(pmd) &= ~PMD_SECT_XN;
+	return pmd;
+}
+
 static inline void kvm_set_s2pte_readonly(pte_t *pte)
 {
 	pte_val(*pte) = (pte_val(*pte) & ~L_PTE_S2_RDWR) | L_PTE_S2_RDONLY;
@@ -93,6 +107,11 @@ static inline bool kvm_s2pte_readonly(pte_t *pte)
 	return (pte_val(*pte) & L_PTE_S2_RDWR) == L_PTE_S2_RDONLY;
 }
 
+static inline bool kvm_s2pte_exec(pte_t *pte)
+{
+	return !(pte_val(*pte) & L_PTE_XN);
+}
+
 static inline void kvm_set_s2pmd_readonly(pmd_t *pmd)
 {
 	pmd_val(*pmd) = (pmd_val(*pmd) & ~L_PMD_S2_RDWR) | L_PMD_S2_RDONLY;
@@ -103,6 +122,11 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
 	return (pmd_val(*pmd) & L_PMD_S2_RDWR) == L_PMD_S2_RDONLY;
 }
 
+static inline bool kvm_s2pmd_exec(pmd_t *pmd)
+{
+	return !(pmd_val(*pmd) & PMD_SECT_XN);
+}
+
 static inline bool kvm_page_empty(void *ptr)
 {
 	struct page *ptr_page = virt_to_page(ptr);
@@ -126,10 +150,36 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 	return (vcpu_cp15(vcpu, c1_SCTLR) & 0b101) == 0b101;
 }
 
-static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
-					       kvm_pfn_t pfn,
-					       unsigned long size)
+static inline void __clean_dcache_guest_page(kvm_pfn_t pfn, unsigned long size)
+{
+	/*
+	 * Clean the dcache to the Point of Coherency.
+	 *
+	 * We need to do this through a kernel mapping (using the
+	 * user-space mapping has proved to be the wrong
+	 * solution). For that, we need to kmap one page at a time,
+	 * and iterate over the range.
+	 */
+
+	VM_BUG_ON(size & ~PAGE_MASK);
+
+	while (size) {
+		void *va = kmap_atomic_pfn(pfn);
+
+		kvm_flush_dcache_to_poc(va, PAGE_SIZE);
+
+		size -= PAGE_SIZE;
+		pfn++;
+
+		kunmap_atomic(va);
+	}
+}
+
+static inline void __invalidate_icache_guest_page(kvm_pfn_t pfn,
+						  unsigned long size)
 {
+	u32 iclsz;
+
 	/*
 	 * If we are going to insert an instruction page and the icache is
 	 * either VIPT or PIPT, there is a potential problem where the host
@@ -141,23 +191,40 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
 	 *
 	 * VIVT caches are tagged using both the ASID and the VMID and doesn't
 	 * need any kind of flushing (DDI 0406C.b - Page B3-1392).
-	 *
-	 * We need to do this through a kernel mapping (using the
-	 * user-space mapping has proved to be the wrong
-	 * solution). For that, we need to kmap one page at a time,
-	 * and iterate over the range.
 	 */
 
 	VM_BUG_ON(size & ~PAGE_MASK);
 
+	if (icache_is_vivt_asid_tagged())
+		return;
+
+	if (!icache_is_pipt()) {
+		/* any kind of VIPT cache */
+		__flush_icache_all();
+		return;
+	}
+
+	/*
+	 * CTR IminLine contains Log2 of the number of words in the
+	 * cache line, so we can get the number of words as
+	 * 2 << (IminLine - 1).  To get the number of bytes, we
+	 * multiply by 4 (the number of bytes in a 32-bit word), and
+	 * get 4 << (IminLine).
+	 */
+	iclsz = 4 << (read_cpuid(CPUID_CACHETYPE) & 0xf);
+
 	while (size) {
 		void *va = kmap_atomic_pfn(pfn);
+		void *end = va + PAGE_SIZE;
+		void *addr = va;
 
-		kvm_flush_dcache_to_poc(va, PAGE_SIZE);
+		do {
+			write_sysreg(addr, ICIMVAU);
+			addr += iclsz;
+		} while (addr < end);
 
-		if (icache_is_pipt())
-			__cpuc_coherent_user_range((unsigned long)va,
-						   (unsigned long)va + PAGE_SIZE);
+		dsb(ishst);
+		isb();
 
 		size -= PAGE_SIZE;
 		pfn++;
@@ -165,9 +232,11 @@ static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
 		kunmap_atomic(va);
 	}
 
-	if (!icache_is_pipt() && !icache_is_vivt_asid_tagged()) {
-		/* any kind of VIPT cache */
-		__flush_icache_all();
+	/* Check if we need to invalidate the BTB */
+	if ((read_cpuid_ext(CPUID_EXT_MMFR1) >> 28) != 4) {
+		write_sysreg(0, BPIALLIS);
+		dsb(ishst);
+		isb();
 	}
 }
 
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 150ece66ddf3..a757401129f9 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -102,8 +102,8 @@ extern pgprot_t		pgprot_s2_device;
 #define PAGE_HYP_EXEC		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY)
 #define PAGE_HYP_RO		_MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY | L_PTE_XN)
 #define PAGE_HYP_DEVICE		_MOD_PROT(pgprot_hyp_device, L_PTE_HYP)
-#define PAGE_S2			_MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY)
-#define PAGE_S2_DEVICE		_MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY)
+#define PAGE_S2			_MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY | L_PTE_XN)
+#define PAGE_S2_DEVICE		_MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY | L_PTE_XN)
 
 #define __PAGE_NONE		__pgprot(_L_PTE_DEFAULT | L_PTE_RDONLY | L_PTE_XN | L_PTE_NONE)
 #define __PAGE_SHARED		__pgprot(_L_PTE_DEFAULT | L_PTE_USER | L_PTE_XN)
diff --git a/arch/arm/kvm/hyp/switch.c b/arch/arm/kvm/hyp/switch.c
index 330c9ce34ba5..ae45ae96aac2 100644
--- a/arch/arm/kvm/hyp/switch.c
+++ b/arch/arm/kvm/hyp/switch.c
@@ -18,6 +18,7 @@
 
 #include <asm/kvm_asm.h>
 #include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
 
 __asm__(".arch_extension     virt");
 
diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c
index 6d810af2d9fd..c0edd450e104 100644
--- a/arch/arm/kvm/hyp/tlb.c
+++ b/arch/arm/kvm/hyp/tlb.c
@@ -19,6 +19,7 @@
  */
 
 #include <asm/kvm_hyp.h>
+#include <asm/kvm_mmu.h>
 
 /**
  * Flush per-VMID TLBs
diff --git a/arch/arm64/include/asm/asm-uaccess.h b/arch/arm64/include/asm/asm-uaccess.h
index b3da6c886835..03064261ee0b 100644
--- a/arch/arm64/include/asm/asm-uaccess.h
+++ b/arch/arm64/include/asm/asm-uaccess.h
@@ -25,13 +25,13 @@
 	isb
 	.endm
 
-	.macro	uaccess_ttbr0_disable, tmp1
+	.macro	uaccess_ttbr0_disable, tmp1, tmp2
 alternative_if_not ARM64_HAS_PAN
 	__uaccess_ttbr0_disable \tmp1
 alternative_else_nop_endif
 	.endm
 
-	.macro	uaccess_ttbr0_enable, tmp1, tmp2
+	.macro	uaccess_ttbr0_enable, tmp1, tmp2, tmp3
 alternative_if_not ARM64_HAS_PAN
 	save_and_disable_irq \tmp2		// avoid preemption
 	__uaccess_ttbr0_enable \tmp1
@@ -39,18 +39,18 @@ alternative_if_not ARM64_HAS_PAN
 alternative_else_nop_endif
 	.endm
 #else
-	.macro	uaccess_ttbr0_disable, tmp1
+	.macro	uaccess_ttbr0_disable, tmp1, tmp2
 	.endm
 
-	.macro	uaccess_ttbr0_enable, tmp1, tmp2
+	.macro	uaccess_ttbr0_enable, tmp1, tmp2, tmp3
 	.endm
 #endif
 
 /*
  * These macros are no-ops when UAO is present.
  */
-	.macro	uaccess_disable_not_uao, tmp1
-	uaccess_ttbr0_disable \tmp1
+	.macro	uaccess_disable_not_uao, tmp1, tmp2
+	uaccess_ttbr0_disable \tmp1, \tmp2
 alternative_if ARM64_ALT_PAN_NOT_UAO
 	SET_PSTATE_PAN(1)
 alternative_else_nop_endif
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index aef72d886677..0884e1fdfd30 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -388,6 +388,27 @@ alternative_endif
 	.endm
 
 /*
+ * Macro to perform an instruction cache maintenance for the interval
+ * [start, end)
+ *
+ * 	start, end:	virtual addresses describing the region
+ *	label:		A label to branch to on user fault.
+ * 	Corrupts:	tmp1, tmp2
+ */
+	.macro invalidate_icache_by_line start, end, tmp1, tmp2, label
+	icache_line_size \tmp1, \tmp2
+	sub	\tmp2, \tmp1, #1
+	bic	\tmp2, \start, \tmp2
+9997:
+USER(\label, ic	ivau, \tmp2)			// invalidate I line PoU
+	add	\tmp2, \tmp2, \tmp1
+	cmp	\tmp2, \end
+	b.lo	9997b
+	dsb	ish
+	isb
+	.endm
+
+/*
  * reset_pmuserenr_el0 - reset PMUSERENR_EL0 if PMUv3 present
  */
 	.macro	reset_pmuserenr_el0, tmpreg
diff --git a/arch/arm64/include/asm/cacheflush.h b/arch/arm64/include/asm/cacheflush.h
index 955130762a3c..bef9f418f089 100644
--- a/arch/arm64/include/asm/cacheflush.h
+++ b/arch/arm64/include/asm/cacheflush.h
@@ -52,6 +52,12 @@
  *		- start  - virtual start address
  *		- end    - virtual end address
  *
+ *	invalidate_icache_range(start, end)
+ *
+ *		Invalidate the I-cache in the region described by start, end.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
  *	__flush_cache_user_range(start, end)
  *
  *		Ensure coherency between the I-cache and the D-cache in the
@@ -66,6 +72,7 @@
  *		- size   - region size
  */
 extern void flush_icache_range(unsigned long start, unsigned long end);
+extern int  invalidate_icache_range(unsigned long start, unsigned long end);
 extern void __flush_dcache_area(void *addr, size_t len);
 extern void __inval_dcache_area(void *addr, size_t len);
 extern void __clean_dcache_area_poc(void *addr, size_t len);
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index ea6cb5b24258..e7218cf7df2a 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -47,6 +47,8 @@
 	KVM_ARCH_REQ_FLAGS(0, KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 #define KVM_REQ_IRQ_PENDING	KVM_ARCH_REQ(1)
 
+DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
+
 int __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
 int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext);
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index 08d3bb66c8b7..f26f9cd70c72 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -20,7 +20,6 @@
 
 #include <linux/compiler.h>
 #include <linux/kvm_host.h>
-#include <asm/kvm_mmu.h>
 #include <asm/sysreg.h>
 
 #define __hyp_text __section(.hyp.text) notrace
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 672c8684d5c2..06f1f9794679 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -173,6 +173,18 @@ static inline pmd_t kvm_s2pmd_mkwrite(pmd_t pmd)
 	return pmd;
 }
 
+static inline pte_t kvm_s2pte_mkexec(pte_t pte)
+{
+	pte_val(pte) &= ~PTE_S2_XN;
+	return pte;
+}
+
+static inline pmd_t kvm_s2pmd_mkexec(pmd_t pmd)
+{
+	pmd_val(pmd) &= ~PMD_S2_XN;
+	return pmd;
+}
+
 static inline void kvm_set_s2pte_readonly(pte_t *pte)
 {
 	pteval_t old_pteval, pteval;
@@ -191,6 +203,11 @@ static inline bool kvm_s2pte_readonly(pte_t *pte)
 	return (pte_val(*pte) & PTE_S2_RDWR) == PTE_S2_RDONLY;
 }
 
+static inline bool kvm_s2pte_exec(pte_t *pte)
+{
+	return !(pte_val(*pte) & PTE_S2_XN);
+}
+
 static inline void kvm_set_s2pmd_readonly(pmd_t *pmd)
 {
 	kvm_set_s2pte_readonly((pte_t *)pmd);
@@ -201,6 +218,11 @@ static inline bool kvm_s2pmd_readonly(pmd_t *pmd)
 	return kvm_s2pte_readonly((pte_t *)pmd);
 }
 
+static inline bool kvm_s2pmd_exec(pmd_t *pmd)
+{
+	return !(pmd_val(*pmd) & PMD_S2_XN);
+}
+
 static inline bool kvm_page_empty(void *ptr)
 {
 	struct page *ptr_page = virt_to_page(ptr);
@@ -230,21 +252,25 @@ static inline bool vcpu_has_cache_enabled(struct kvm_vcpu *vcpu)
 	return (vcpu_sys_reg(vcpu, SCTLR_EL1) & 0b101) == 0b101;
 }
 
-static inline void __coherent_cache_guest_page(struct kvm_vcpu *vcpu,
-					       kvm_pfn_t pfn,
-					       unsigned long size)
+static inline void __clean_dcache_guest_page(kvm_pfn_t pfn, unsigned long size)
 {
 	void *va = page_address(pfn_to_page(pfn));
 
 	kvm_flush_dcache_to_poc(va, size);
+}
 
+static inline void __invalidate_icache_guest_page(kvm_pfn_t pfn,
+						  unsigned long size)
+{
 	if (icache_is_aliasing()) {
 		/* any kind of VIPT cache */
 		__flush_icache_all();
 	} else if (is_kernel_in_hyp_mode() || !icache_is_vpipt()) {
 		/* PIPT or VPIPT at EL2 (see comment in __kvm_tlb_flush_vmid_ipa) */
-		flush_icache_range((unsigned long)va,
-				   (unsigned long)va + size);
+		void *va = page_address(pfn_to_page(pfn));
+
+		invalidate_icache_range((unsigned long)va,
+					(unsigned long)va + size);
 	}
 }
 
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index eb0c2bd90de9..af035331fb09 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -177,9 +177,11 @@
  */
 #define PTE_S2_RDONLY		(_AT(pteval_t, 1) << 6)   /* HAP[2:1] */
 #define PTE_S2_RDWR		(_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
+#define PTE_S2_XN		(_AT(pteval_t, 2) << 53)  /* XN[1:0] */
 
 #define PMD_S2_RDONLY		(_AT(pmdval_t, 1) << 6)   /* HAP[2:1] */
 #define PMD_S2_RDWR		(_AT(pmdval_t, 3) << 6)   /* HAP[2:1] */
+#define PMD_S2_XN		(_AT(pmdval_t, 2) << 53)  /* XN[1:0] */
 
 /*
  * Memory Attribute override for Stage-2 (MemAttr[3:0])
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index 0a5635fb0ef9..4e12dabd342b 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -60,8 +60,8 @@
 #define PAGE_HYP_RO		__pgprot(_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY | PTE_HYP_XN)
 #define PAGE_HYP_DEVICE		__pgprot(PROT_DEVICE_nGnRE | PTE_HYP)