Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits)
  sh: Fixup SH-2 BUG() trap handling.
  sh: Use early_param() for earlyprintk parsing.
  sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
  sh: Fixup .data.page_aligned.
  sh: Hook up SH7722 scif ipr interrupts.
  sh: Fixup sh_bios() trap handling.
  sh: SH-MobileR SH7722 CPU support.
  sh: Fixup dma_cache_sync() callers.
  sh: Convert remaining remap_area_pages() users to ioremap_page_range().
  sh: Fixup kernel_execve() for syscall cleanups.
  sh: Fix get_wchan().
  sh: BUG() handling through trapa vector.
  rtc: rtc-sh: alarm support.
  rtc: rtc-sh: fix rtc for out-by-one for the month.
  sh: Kill off unused SE7619 I/O ops.
  serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.
  sh: Split out atomic ops logically.
  sh: Fix Solution Engine 7619 build.
  sh: Trivial build fixes for SH-2 support.
  sh: IPR IRQ updates for SH7619/SH7206.
  ...

63 files changed, 2038 insertions, 557 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8e24c40662e3..3aa3b885ab36 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -479,7 +479,7 @@ config SH_CLK_MD
 	int "CPU Mode Pin Setting"
 	depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
 	help
-	  MD2 - MD0 Setting.
+	  MD2 - MD0 pin setting.
 
 menu "CPU Frequency scaling"
 
@@ -580,18 +580,6 @@ config NR_CPUS
 
 source "kernel/Kconfig.preempt"
 
-config CPU_HAS_SR_RB
-	bool "CPU has SR.RB"
-	depends on CPU_SH3 || CPU_SH4
-	default y
-	help
-	  This will enable the use of SR.RB register bank usage. Processors
-	  that are lacking this bit must have another method in place for
-	  accomplishing what is taken care of by the banked registers.
-
-	  See <file:Documentation/sh/register-banks.txt> for further
-	  information on SR.RB and register banking in the kernel in general.
-
 config NODES_SHIFT
 	int
 	default "1"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 66a25ef4ef1b..87902e0298e2 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -31,7 +31,8 @@ config EARLY_SCIF_CONSOLE_PORT
 	hex "SCIF port for early console"
 	depends on EARLY_SCIF_CONSOLE
 	default "0xffe00000" if CPU_SUBTYPE_SH7780
-	default "0xfffe9800" if CPU_SUBTYPE_SH72060
+	default "0xfffe9800" if CPU_SUBTYPE_SH7206
+	default "0xf8420000" if CPU_SUBTYPE_SH7619
 	default "0xffe80000" if CPU_SH4
 
 config EARLY_PRINTK
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index d10bba5e1074..c1dbef212634 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -179,7 +179,7 @@ maketools:  include/linux/version.h FORCE
 
 all: zImage
 
-zImage: vmlinux
+zImage uImage uImage.srec vmlinux.srec: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 compressed: zImage
@@ -190,5 +190,8 @@ archclean:
 CLEAN_FILES += include/asm-sh/machtypes.h
 
 define archhelp
-	@echo '  zImage 	           - Compressed kernel image (arch/sh/boot/zImage)'
+	@echo '* zImage 	           - Compressed kernel image'
+	@echo '  vmlinux.srec	           - Create an ELF S-record'
+	@echo '  uImage  	           - Create a bootable image for U-Boot'
+	@echo '  uImage.srec  	           - Create an S-record for U-Boot'
 endef
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
index 8f2e1c68b90f..3eba6d086d7f 100644
--- a/arch/sh/boards/landisk/irq.c
+++ b/arch/sh/boards/landisk/irq.c
@@ -16,8 +16,8 @@
  */
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
 #include <asm/landisk/iodata_landisk.h>
 
 static void enable_landisk_irq(unsigned int irq);
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
index 3fb0c5f5b23a..27da88486f73 100644
--- a/arch/sh/boards/se/7206/irq.c
+++ b/arch/sh/boards/se/7206/irq.c
@@ -10,6 +10,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <asm/se7206.h>
 
 #define INTSTS0 0x31800000
@@ -18,6 +19,13 @@
 #define INTMSK1 0x31800006
 #define INTSEL  0x31800008
 
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
 static void disable_se7206_irq(unsigned int irq)
 {
 	unsigned short val;
@@ -39,7 +47,7 @@ static void disable_se7206_irq(unsigned int irq)
 	case IRQ1_IRQ:
 		msk0 |= 0x000f;
 		break;
-	case IRQ2_IRQ:
+	case IRQ3_IRQ:
 		msk0 |= 0x0f00;
 		msk1 |= 0x00ff;
 		break;
@@ -70,7 +78,7 @@ static void enable_se7206_irq(unsigned int irq)
 	case IRQ1_IRQ:
 		msk0 &= ~0x000f;
 		break;
-	case IRQ2_IRQ:
+	case IRQ3_IRQ:
 		msk0 &= ~0x0f00;
 		msk1 &= ~0x00ff;
 		break;
@@ -96,7 +104,7 @@ static void eoi_se7206_irq(unsigned int irq)
 	case IRQ1_IRQ:
 		sts0 &= ~0x000f;
 		break;
-	case IRQ2_IRQ:
+	case IRQ3_IRQ:
 		sts0 &= ~0x0f00;
 		sts1 &= ~0x00ff;
 		break;
@@ -106,7 +114,7 @@ static void eoi_se7206_irq(unsigned int irq)
 }
 
 static struct irq_chip se7206_irq_chip __read_mostly = {
-	.name		= "SE7206-FPGA-IRQ",
+	.name		= "SE7206-FPGA",
 	.mask		= disable_se7206_irq,
 	.unmask		= enable_se7206_irq,
 	.mask_ack	= disable_se7206_irq,
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
index 3666eca8a658..d21775c28cda 100644
--- a/arch/sh/boards/se/7619/Makefile
+++ b/arch/sh/boards/se/7619/Makefile
@@ -2,4 +2,4 @@
 # Makefile for the 7619 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o
+obj-y	 := setup.o
diff --git a/arch/sh/boards/se/7619/io.c b/arch/sh/boards/se/7619/io.c
deleted file mode 100644
index 176f1f39cd9d..000000000000
--- a/arch/sh/boards/se/7619/io.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7619/io.c
- *
- * Copyright (C) 2006  Yoshinori Sato
- *
- * I/O routine for Hitachi 7619 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7619.h>
-#include <asm/irq.h>
-
-/* FIXME: M3A-ZAB7 Compact Flash Slot support */
-
-static inline void delay(void)
-{
-	ctrl_inw(0xa0000000);	/* Uncached ROM area (P2) */
-}
-
-#define badio(name,port) \
-  printk("bad I/O operation (%s) for port 0x%lx at 0x%08x\n", \
-	 #name, (port), (__u32) __builtin_return_address(0))
-
-unsigned char se7619___inb(unsigned long port)
-{
-	badio(inb, port);
-	return 0;
-}
-
-unsigned char se7619___inb_p(unsigned long port)
-{
-	badio(inb_p, port);
-	delay();
-	return 0;
-}
-
-unsigned short se7619___inw(unsigned long port)
-{
-	badio(inw, port);
-	return 0;
-}
-
-unsigned int se7619___inl(unsigned long port)
-{
-	badio(inl, port);
-	return 0;
-}
-
-void se7619___outb(unsigned char value, unsigned long port)
-{
-	badio(outb, port);
-}
-
-void se7619___outb_p(unsigned char value, unsigned long port)
-{
-	badio(outb_p, port);
-	delay();
-}
-
-void se7619___outw(unsigned short value, unsigned long port)
-{
-	badio(outw, port);
-}
-
-void se7619___outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void se7619___insb(unsigned long port, void *addr, unsigned long count)
-{
-	badio(inw, port);
-}
-
-void se7619___insw(unsigned long port, void *addr, unsigned long count)
-{
-	badio(inw, port);
-}
-
-void se7619___insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void se7619___outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void se7619___outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void se7619___outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/se/7619/setup.c
index e627b26de0d0..52d2c4d5d2fa 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/se/7619/setup.c
@@ -9,7 +9,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/se7619.h>
 #include <asm/machvec.h>
 
 /*
@@ -19,25 +18,5 @@
 struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 108,
-	.mv_inb			= se7619___inb,
-	.mv_inw			= se7619___inw,
-	.mv_inl			= se7619___inl,
-	.mv_outb		= se7619___outb,
-	.mv_outw		= se7619___outw,
-	.mv_outl		= se7619___outl,
-
-	.mv_inb_p		= se7619___inb_p,
-	.mv_inw_p		= se7619___inw,
-	.mv_inl_p		= se7619___inl,
-	.mv_outb_p		= se7619___outb_p,
-	.mv_outw_p		= se7619___outw,
-	.mv_outl_p		= se7619___outl,
-
-	.mv_insb		= se7619___insb,
-	.mv_insw		= se7619___insw,
-	.mv_insl		= se7619___insl,
-	.mv_outsb		= se7619___outsb,
-	.mv_outsw		= se7619___outsw,
-	.mv_outsl		= se7619___outsl,
 };
 ALIAS_MV(se)
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 60797b31089c..11dc272c618e 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -8,13 +8,49 @@
 # Copyright (C) 1999 Stuart Menefy
 #
 
-targets := zImage
+MKIMAGE := $(srctree)/scripts/mkuboot.sh
+
+#
+# Assign safe dummy values if these variables are not defined,
+# in order to suppress error message.
+#
+CONFIG_PAGE_OFFSET	?= 0x80000000
+CONFIG_MEMORY_START	?= 0x0c000000
+CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
+CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+
+export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
+       CONFIG_ZERO_PAGE_OFFSET
+
+targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
 
 $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@echo 'Kernel: $@ is ready'
+	@echo '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
+KERNEL_LOAD	:= $(shell printf "0x%8x" $$[$(CONFIG_PAGE_OFFSET)  + \
+					     $(CONFIG_MEMORY_START) + \
+					     $(CONFIG_ZERO_PAGE_OFFSET)+0x1000])
+
+quiet_cmd_uimage = UIMAGE  $@
+      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
+		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \
+		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
+
+$(obj)/uImage: $(obj)/zImage FORCE
+	$(call if_changed,uimage)
+	@echo '  Image $@ is ready'
+
+OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
+$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_uImage.srec := -I binary -O srec
+$(obj)/uImage.srec: $(obj)/uImage
+	$(call if_changed,objcopy)
+
+clean-files	+= uImage uImage.srec vmlinux.srec
diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile
index e5f443790079..d9512416f885 100644
--- a/arch/sh/boot/compressed/Makefile
+++ b/arch/sh/boot/compressed/Makefile
@@ -15,13 +15,7 @@ endif
 
 #
 # IMAGE_OFFSET is the load offset of the compression loader
-# Assign dummy values if these 2 variables are not defined,
-# in order to suppress error message.
 #
-CONFIG_PAGE_OFFSET	?= 0x80000000
-CONFIG_MEMORY_START     ?= 0x0c000000
-CONFIG_BOOT_LINK_OFFSET ?= 0x00800000
-
 IMAGE_OFFSET	:= $(shell printf "0x%08x" $$[$(CONFIG_PAGE_OFFSET)  + \
 					      $(CONFIG_MEMORY_START) + \
 					      $(CONFIG_BOOT_LINK_OFFSET)])
diff --git a/arch/sh/boot/compressed/head.S b/arch/sh/boot/compressed/head.S
index 4c26a192277d..a8399b013729 100644
--- a/arch/sh/boot/compressed/head.S
+++ b/arch/sh/boot/compressed/head.S
@@ -8,6 +8,7 @@
 .text
 
 #include <linux/linkage.h>
+#include <asm/page.h>
 
 	.global	startup
 startup:
@@ -97,7 +98,7 @@ init_stack_addr:
 decompress_kernel_addr:
 	.long	decompress_kernel
 kernel_start_addr:
-	.long	_text+0x1000
+	.long	_text+PAGE_SIZE
 
 	.align	9
 fake_headers_as_bzImage:
diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc.c
index 35452d85b7f7..df65e305acf7 100644
--- a/arch/sh/boot/compressed/misc.c
+++ b/arch/sh/boot/compressed/misc.c
@@ -13,6 +13,7 @@
 
 #include <asm/uaccess.h>
 #include <asm/addrspace.h>
+#include <asm/page.h>
 #ifdef CONFIG_SH_STANDARD_BIOS
 #include <asm/sh_bios.h>
 #endif
@@ -229,7 +230,7 @@ long* stack_start = &user_stack[STACK_SIZE];
 void decompress_kernel(void)
 {
 	output_data = 0;
-	output_ptr = P2SEGADDR((unsigned long)&_text+0x1000);
+	output_ptr = P2SEGADDR((unsigned long)&_text+PAGE_SIZE);
 	free_mem_ptr = (unsigned long)&_end;
 	free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
 
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 238c0f109907..e7f8ddb0ada4 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:14:13 2006
+# Linux kernel version: 2.6.19
+# Thu Dec  7 17:13:04 2006
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -10,6 +10,9 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -33,6 +36,7 @@ CONFIG_SYSVIPC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -114,6 +118,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_SH_LANDISK=y
 # CONFIG_SH_TITAN is not set
 # CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
 # CONFIG_SH_UNKNOWN is not set
 
 #
@@ -125,6 +131,12 @@ CONFIG_CPU_SH4=y
 # SH-2 Processor Support
 #
 # CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
 
 #
 # SH-3 Processor Support
@@ -160,6 +172,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 #
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
 
 #
 # SH4AL-DSP Processor Support
@@ -175,6 +188,9 @@ CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
 CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,16 +212,21 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 # CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
 
 #
 # Timer support
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
 
 #
@@ -216,9 +237,7 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # DMA support
 #
-CONFIG_SH_DMA=y
-CONFIG_NR_ONCHIP_DMA_CHANNELS=4
-# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -227,6 +246,11 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 CONFIG_HEARTBEAT=y
 
 #
+# Additional SuperH Device Drivers
+#
+# CONFIG_PUSH_SWITCH is not set
+
+#
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
@@ -340,11 +364,13 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -361,24 +387,12 @@ CONFIG_NETFILTER=y
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -477,6 +491,12 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #