Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC-related driver updates from Olof Johansson:
 "Various driver updates for platforms and a couple of the small driver
  subsystems we merge through our tree:

   - A driver for SCU (system control) on NXP i.MX8QXP

   - Qualcomm Always-on Subsystem messaging driver (AOSS QMP)

   - Qualcomm PM support for MSM8998

   - Support for a newer version of DRAM PHY driver for Broadcom (DPFE)

   - Reset controller support for Bitmain BM1880

   - TI SCI (System Control Interface) support for CPU control on AM654
     processors

   - More TI sysc refactoring and rework"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits)
  reset: remove redundant null check on pointer dev
  soc: rockchip: work around clang warning
  dt-bindings: reset: imx7: Fix the spelling of 'indices'
  soc: imx: Add i.MX8MN SoC driver support
  soc: aspeed: lpc-ctrl: Fix probe error handling
  soc: qcom: geni: Add support for ACPI
  firmware: ti_sci: Fix gcc unused-but-set-variable warning
  firmware: ti_sci: Use the correct style for SPDX License Identifier
  soc: imx8: Use existing of_root directly
  soc: imx8: Fix potential kernel dump in error path
  firmware/psci: psci_checker: Park kthreads before stopping them
  memory: move jedec_ddr.h from include/memory to drivers/memory/
  memory: move jedec_ddr_data.c from lib/ to drivers/memory/
  MAINTAINERS: Remove myself as qcom maintainer
  soc: aspeed: lpc-ctrl: make parameter optional
  soc: qcom: apr: Don't use reg for domain id
  soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
  memory: tegra: Fix -Wunused-const-variable
  firmware: tegra: Early resume BPMP
  soc/tegra: Select pinctrl for Tegra194
  ...

70 files changed, 4618 insertions, 493 deletions

diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt
index 5f3719ab7075..317a2fc3667a 100644
--- a/Documentation/devicetree/bindings/arm/arm,scmi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt
@@ -6,7 +6,7 @@ that are provided by the hardware platform it is running on, including power
 and performance functions.
 
 This binding is intended to define the interface the firmware implementing
-the SCMI as described in ARM document number ARM DUI 0922B ("ARM System Control
+the SCMI as described in ARM document number ARM DEN 0056A ("ARM System Control
 and Management Interface Platform Design Document")[0] provide for OSPM in
 the device tree.
 
diff --git a/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt
new file mode 100644
index 000000000000..1442ba5d2d98
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt
@@ -0,0 +1,11 @@
+DPAA2 console support
+
+Required properties:
+
+    - compatible
+        Value type: <string>
+        Definition: Must be "fsl,dpaa2-console".
+    - reg
+        Value type: <prop-encoded-array>
+        Definition: A standard property.  Specifies the region where the MCFBA
+                    (MC firmware base address) register can be found.
diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
index 980e5413d18f..eb35b22f9e23 100644
--- a/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
+++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.txt
@@ -6,6 +6,8 @@ which then translates it into a corresponding voltage on a rail
 Required Properties:
  - compatible: Should be one of the following
 	* qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
+	* qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC
+	* qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC
 	* qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
  - #power-domain-cells: number of cells in Power domain specifier
 	must be 1.
diff --git a/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
new file mode 100644
index 000000000000..a6f8455ae6c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/bitmain,bm1880-reset.txt
@@ -0,0 +1,18 @@
+Bitmain BM1880 SoC Reset Controller
+===================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible:   Should be "bitmain,bm1880-reset"
+- reg:          Offset and length of reset controller space in SCTRL.
+- #reset-cells: Must be 1.
+
+Example:
+
+        rst: reset-controller@c00 {
+                compatible = "bitmain,bm1880-reset";
+                reg = <0xc00 0x8>;
+                #reset-cells = <1>;
+        };
diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
index 2ecf33815d18..13e095182db4 100644
--- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
+++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
@@ -45,6 +45,6 @@ Example:
         };
 
 
-For list of all valid reset indicies see
+For list of all valid reset indices see
 <dt-bindings/reset/imx7-reset.h> for i.MX7 and
 <dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ
diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
index 436d2106e80d..e876f3ce54f6 100644
--- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,canvas.txt
@@ -2,8 +2,8 @@ Amlogic Canvas
 ================================
 
 A canvas is a collection of metadata that describes a pixel buffer.
-Those metadata include: width, height, phyaddr, wrapping, block mode
-and endianness.
+Those metadata include: width, height, phyaddr, wrapping and block mode.
+Starting with GXBB the endianness can also be described.
 
 Many IPs within Amlogic SoCs rely on canvas indexes to read/write pixel data
 rather than use the phy addresses directly. For instance, this is the case for
@@ -18,7 +18,11 @@ Video Lookup Table
 --------------------------
 
 Required properties:
-- compatible: "amlogic,canvas"
+- compatible: has to be one of:
+		- "amlogic,meson8-canvas", "amlogic,canvas" on Meson8
+		- "amlogic,meson8b-canvas", "amlogic,canvas" on Meson8b
+		- "amlogic,meson8m2-canvas", "amlogic,canvas" on Meson8m2
+		- "amlogic,canvas" on GXBB and newer
 - reg: Base physical address and size of the canvas registers.
 
 Example:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
new file mode 100644
index 000000000000..954ffee0a9c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt
@@ -0,0 +1,81 @@
+Qualcomm Always-On Subsystem side channel binding
+
+This binding describes the hardware component responsible for side channel
+requests to the always-on subsystem (AOSS), used for certain power management
+requests that is not handled by the standard RPMh interface. Each client in the
+SoC has it's own block of message RAM and IRQ for communication with the AOSS.
+The protocol used to communicate in the message RAM is known as Qualcomm
+Messaging Protocol (QMP)
+
+The AOSS side channel exposes control over a set of resources, used to control
+a set of debug related clocks and to affect the low power state of resources
+related to the secondary subsystems. These resources are exposed as a set of
+power-domains.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be "qcom,sdm845-aoss-qmp"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of the message RAM for this
+		    client's communication with the AOSS
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the AOSS message IRQ for this client
+
+- mboxes:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to the mailbox representing the outgoing doorbell
+		    in APCS for this client, as described in mailbox/mailbox.txt
+
+- #clock-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: must be 0
+		    The single clock represents the QDSS clock.
+
+- #power-domain-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: must be 1
+		    The provided power-domains are:
+		    CDSP state (0), LPASS state (1), modem state (2), SLPI
+		    state (3), SPSS state (4) and Venus state (5).
+
+= SUBNODES
+The AOSS side channel also provides the controls for three cooling devices,
+these are expressed as subnodes of the QMP node. The name of the node is used
+to identify the resource and must therefor be "cx", "mx" or "ebi".
+
+- #cooling-cells:
+	Usage: optional
+	Value type: <u32>
+	Definition: must be 2
+
+= EXAMPLE
+
+The following example represents the AOSS side-channel message RAM and the
+mechanism exposing the power-domains, as found in SDM845.
+
+  aoss_qmp: qmp@c300000 {
+	  compatible = "qcom,sdm845-aoss-qmp";
+	  reg = <0x0c300000 0x100000>;
+	  interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
+	  mboxes = <&apss_shared 0>;
+
+	  #power-domain-cells = <1>;
+
+	  cx_cdev: cx {
+		#cooling-cells = <2>;
+	  };
+
+	  mx_cdev: mx {
+		#cooling-cells = <2>;
+	  };
+  };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
index bcc612cc7423..db501269f47b 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr.txt
@@ -9,7 +9,7 @@ used for audio/voice services on the QDSP.
 	Value type: <stringlist>
 	Definition: must be "qcom,apr-v<VERSION-NUMBER>", example "qcom,apr-v2"
 
-- reg
+- qcom,apr-domain
 	Usage: required
 	Value type: <u32>
 	Definition: Destination processor ID.
@@ -49,9 +49,9 @@ by the individual bindings for the specific service
 The following example represents a QDSP based sound card on a MSM8996 device
 which uses apr as communication between Apps and QDSP.
 
-	apr@4 {
+	apr {
 		compatible = "qcom,apr-v2";
-		reg = <APR_DOMAIN_ADSP>;
+		qcom,apr-domain = <APR_DOMAIN_ADSP>;
 
 		q6core@3 {
 			compatible = "qcom,q6core";
diff --git a/MAINTAINERS b/MAINTAINERS
index 9bd4c3b154e8..bd3fe4fe13c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2091,7 +2091,6 @@ S:	Maintained
 
 ARM/QUALCOMM SUPPORT
 M:	Andy Gross <agross@kernel.org>
-M:	David Brown <david.brown@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
@@ -2113,7 +2112,7 @@ F:	drivers/i2c/busses/i2c-qup.c
 F:	drivers/i2c/busses/i2c-qcom-geni.c
 F:	drivers/mfd/ssbi.c
 F:	drivers/mmc/host/mmci_qcom*
-F:	drivers/mmc/host/sdhci_msm.c
+F:	drivers/mmc/host/sdhci-msm.c
 F:	drivers/pci/controller/dwc/pcie-qcom.c
 F:	drivers/phy/qualcomm/
 F:	drivers/power/*/msm*
@@ -6527,6 +6526,7 @@ M:	Li Yang <leoyang.li@nxp.com>
 L:	linuxppc-dev@lists.ozlabs.org
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/misc/fsl,dpaa2-console.txt
 F:	Documentation/devicetree/bindings/soc/fsl/
 F:	drivers/soc/fsl/
 F:	include/linux/fsl/
@@ -11907,11 +11907,13 @@ F:	include/linux/mtd/onenand*.h
 
 OP-TEE DRIVER
 M:	Jens Wiklander <jens.wiklander@linaro.org>
+L:	tee-dev@lists.linaro.org
 S:	Maintained
 F:	drivers/tee/optee/
 
 OP-TEE RANDOM NUMBER GENERATOR (RNG) DRIVER
 M:	Sumit Garg <sumit.garg@linaro.org>
+L:	tee-dev@lists.linaro.org
 S:	Maintained
 F:	drivers/char/hw_random/optee-rng.c
 
@@ -13295,7 +13297,7 @@ M:	Niklas Cassel <niklas.cassel@linaro.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
-F:	Documentation/devicetree/bindings/net/qcom,dwmac.txt
+F:	Documentation/devicetree/bindings/net/qcom,ethqos.txt
 
 QUALCOMM GENERIC INTERFACE I2C DRIVER
 M:	Alok Chauhan <alokc@codeaurora.org>
@@ -15745,6 +15747,7 @@ F:	include/media/i2c/tw9910.h
 
 TEE SUBSYSTEM
 M:	Jens Wiklander <jens.wiklander@linaro.org>
+L:	tee-dev@lists.linaro.org
 S:	Maintained
 F:	include/linux/tee_drv.h
 F:	include/uapi/linux/tee.h
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e0350476feaa..203664c40d3d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3442,6 +3442,7 @@ static int omap_hwmod_check_module(struct device *dev,
  * @dev: struct device
  * @oh: module
  * @sysc_fields: sysc register bits
+ * @clockdomain: clockdomain
  * @rev_offs: revision register offset
  * @sysc_offs: sysconfig register offset
  * @syss_offs: sysstatus register offset
@@ -3453,6 +3454,7 @@ static int omap_hwmod_check_module(struct device *dev,
 static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 				      const struct ti_sysc_module_data *data,
 				      struct sysc_regbits *sysc_fields,
+				      struct clockdomain *clkdm,
 				      s32 rev_offs, s32 sysc_offs,
 				      s32 syss_offs, u32 sysc_flags,
 				      u32 idlemodes)
@@ -3460,8 +3462,6 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	struct omap_hwmod_class_sysconfig *sysc;
 	struct omap_hwmod_class *class = NULL;
 	struct omap_hwmod_ocp_if *oi = NULL;
-	struct clockdomain *clkdm = NULL;
-	struct clk *clk = NULL;
 	void __iomem *regs = NULL;
 	unsigned long flags;
 
@@ -3508,36 +3508,6 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 		oi->user = OCP_USER_MPU | OCP_USER_SDMA;
 	}
 
-	if (!oh->_clk) {
-		struct clk_hw_omap *hwclk;
-
-		clk = of_clk_get_by_name(dev->of_node, "fck");
-		if (!IS_ERR(clk))
-			clk_prepare(clk);
-		else
-			clk = NULL;
-
-		/*
-		 * Populate clockdomain based on dts clock. It is needed for
-		 * clkdm_deny_idle() and clkdm_allow_idle() until we have have
-		 * interconnect driver and reset driver capable of blocking
-		 * clockdomain idle during reset, enable and idle.
-		 */
-		if (clk) {
-			hwclk = to_clk_hw_omap(__clk_get_hw(clk));
-			if (hwclk && hwclk->clkdm_name)
-				clkdm = clkdm_lookup(hwclk->clkdm_name);
-		}
-
-		/*
-		 * Note that we assume interconnect driver manages the clocks
-		 * and do not need to populate oh->_clk for dynamically
-		 * allocated modules.
-		 */
-		clk_unprepare(clk);
-		clk_put(clk);
-	}
-
 	spin_lock_irqsave(&oh->_lock, flags);
 	if (regs)
 		oh->_mpu_rt_va = regs;
@@ -3623,7 +3593,7 @@ int omap_hwmod_init_module(struct device *dev,
 	u32 sysc_flags, idlemodes;
 	int error;
 
-	if (!dev || !data)
+	if (!dev || !data || !data->name || !cookie)
 		return -EINVAL;
 
 	oh = _lookup(data->name);
@@ -3694,7 +3664,8 @@ int omap_hwmod_init_module(struct device *dev,
 		return error;
 
 	return omap_hwmod_allocate_module(dev, oh, data, sysc_fields,
-					  rev_offs, sysc_offs, syss_offs,
+					  cookie->clkdm, rev_offs,
+					  sysc_offs, syss_offs,
 					  sysc_flags, idlemodes);
 }
 
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index b0f8c9a70c68..6c6f8fce854e 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -26,6 +26,7 @@
 #include <linux/platform_data/wkup_m3.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 
+#include "clockdomain.h"
 #include "common.h"
 #include "common-board-devices.h"
 #include "control.h"
@@ -460,6 +461,62 @@ static void __init dra7x_evm_mmc_quirk(void)
 }
 #endif
 
+static struct clockdomain *ti_sysc_find_one_clockdomain(struct clk *clk)
+{
+	struct clockdomain *clkdm = NULL;
+	struct clk_hw_omap *hwclk;
+
+	hwclk = to_clk_hw_omap(__clk_get_hw(clk));
+	if (hwclk && hwclk->clkdm_name)
+		clkdm = clkdm_lookup(hwclk->clkdm_name);
+
+	return clkdm;
+}
+
+/**
+ * ti_sysc_clkdm_init - find clockdomain based on clock
+ * @fck: device functional clock
+ * @ick: device interface clock
+ * @dev: struct device
+ *
+ * Populate clockdomain based on clock. It is needed for
+ * clkdm_deny_idle() and clkdm_allow_idle() for blocking clockdomain
+ * clockdomain idle during reset, enable and idle.
+ *
+ * Note that we assume interconnect driver manages the clocks
+ * and do not need to populate oh->_clk for dynamically
+ * allocated modules.
+ */
+static int ti_sysc_clkdm_init(struct device *dev,
+			      struct clk *fck, struct clk *ick,
+			      struct ti_sysc_cookie *cookie)
+{
+	if (fck)
+		cookie->clkdm = ti_sysc_find_one_clockdomain(fck);
+	if (cookie->clkdm)
+		return 0;
+	if (ick)
+		cookie->clkdm = ti_sysc_find_one_clockdomain(ick);
+	if (cookie->clkdm)
+		return 0;
+
+	return -ENODEV;
+}
+
+static void ti_sysc_clkdm_deny_idle(struct device *dev,
+				    const struct ti_sysc_cookie *cookie)