Merge tag 'renesas-sh7372-soc-removal-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/multiplatform

Pull "Renesas ARM Based SoC sh7372 SoC Removal Updates for v4.1" from Simon Horman:

* Remove the sh7372 SoC and its mackerel board

* tag 'renesas-sh7372-soc-removal-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  Documentation: Remove ZBOOT MMC/SDHI utility and docs
  ARM: shmobile: sh7372 dtsi: Remove Legacy DTSI file
  ARM: shmobile: sh7372: Remove DT binding documentation
  ARM: shmobile: sh7372: Remove Legacy C SoC code
  ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support
  ARM: shmobile: mackerel: Remove from MAINTAINERS
  ARM: shmobile: mackerel: Remove defconfig
  ARM: shmobile: mackerel: Remove mach-type entry
  ARM: shmobile: mackerel: Remove DT binding documentation
  ARM: shmobile: mackerel dts: Remove Legacy DTS file
  ARM: shmobile: mackerel: Remove Legacy C board code
  ARM: shmobile: mackerel: Remove ZBOOT code

[arnd: The sh7372 platform is rather dated and is believed to
 have no active users on modern kernels. It stands in the way
 of converting all of mach-shmobile to be multiplatform capable,
 as adding pinctrl and common-clock support for it would be more
 work than it's  worth. As always, should any legitimate upstream
 users show up in the future, we will revert this removal]

39 files changed, 5 insertions, 6023 deletions

diff --git a/Documentation/Makefile b/Documentation/Makefile
index 6883a1b9b351..bc0548201755 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -1,4 +1,4 @@
-subdir-y := accounting arm auxdisplay blackfin connector \
+subdir-y := accounting auxdisplay blackfin connector \
 	filesystems filesystems ia64 laptops mic misc-devices \
 	networking pcmcia prctl ptp spi timers vDSO video4linux \
 	watchdog
diff --git a/Documentation/arm/Makefile b/Documentation/arm/Makefile
deleted file mode 100644
index 732c77050cff..000000000000
--- a/Documentation/arm/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-subdir-y := SH-Mobile
diff --git a/Documentation/arm/SH-Mobile/Makefile b/Documentation/arm/SH-Mobile/Makefile
deleted file mode 100644
index bca8a7ef6bbe..000000000000
--- a/Documentation/arm/SH-Mobile/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-# List of programs to build
-hostprogs-y := vrl4
-
-# Tell kbuild to always build the programs
-always := $(hostprogs-y)
-
-HOSTCFLAGS_vrl4.o += -I$(objtree)/usr/include -I$(srctree)/tools/include
diff --git a/Documentation/arm/SH-Mobile/vrl4.c b/Documentation/arm/SH-Mobile/vrl4.c
deleted file mode 100644
index f4cd8ad4e720..000000000000
--- a/Documentation/arm/SH-Mobile/vrl4.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * vrl4 format generator
- *
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-/*
- * usage: vrl4 < zImage > out
- *	  dd if=out of=/dev/sdx bs=512 seek=1 # Write the image to sector 1
- *
- * Reads a zImage from stdin and writes a vrl4 image to stdout.
- * In practice this means writing a padded vrl4 header to stdout followed
- * by the zImage.
- *
- * The padding places the zImage at ALIGN bytes into the output.
- * The vrl4 uses ALIGN + START_BASE as the start_address.
- * This is where the mask ROM will jump to after verifying the header.
- *
- * The header sets copy_size to min(sizeof(zImage), MAX_BOOT_PROG_LEN) + ALIGN.
- * That is, the mask ROM will load the padded header (ALIGN bytes)
- * And then MAX_BOOT_PROG_LEN bytes of the image, or the entire image,
- * whichever is smaller.
- *
- * The zImage is not modified in any way.
- */
-
-#define _BSD_SOURCE
-#include <endian.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <stdio.h>
-#include <errno.h>
-#include <tools/endian.h>
-
-struct hdr {
-	uint32_t magic1;
-	uint32_t reserved1;
-	uint32_t magic2;
-	uint32_t reserved2;
-	uint16_t copy_size;
-	uint16_t boot_options;
-	uint32_t reserved3;
-	uint32_t start_address;
-	uint32_t reserved4;
-	uint32_t reserved5;
-	char     reserved6[308];
-};
-
-#define DECLARE_HDR(h)					\
-	struct hdr (h) = {				\
-		.magic1 =	htole32(0xea000000),	\
-		.reserved1 =	htole32(0x56),		\
-		.magic2 =	htole32(0xe59ff008),	\
-		.reserved3 =	htole16(0x1) }
-
-/* Align to 512 bytes, the MMCIF sector size */
-#define ALIGN_BITS	9
-#define ALIGN		(1 << ALIGN_BITS)
-
-#define START_BASE	0xe55b0000
-
-/*
- * With an alignment of 512 the header uses the first sector.
- * There is a 128 sector (64kbyte) limit on the data loaded by the mask ROM.
- * So there are 127 sectors left for the boot programme. But in practice
- * Only a small portion of a zImage is needed, 16 sectors should be more
- * than enough.
- *
- * Note that this sets how much of the zImage is copied by the mask ROM.
- * The entire zImage is present after the header and is loaded
- * by the code in the boot program (which is the first portion of the zImage).
- */
-#define	MAX_BOOT_PROG_LEN (16 * 512)
-
-#define ROUND_UP(x)	((x + ALIGN - 1) & ~(ALIGN - 1))
-
-static ssize_t do_read(int fd, void *buf, size_t count)
-{
-	size_t offset = 0;
-	ssize_t l;
-
-	while (offset < count) {
-		l = read(fd, buf + offset, count - offset);
-		if (!l)
-			break;
-		if (l < 0) {
-			if (errno == EAGAIN || errno == EWOULDBLOCK)
-				continue;
-			perror("read");
-			return -1;
-		}
-		offset += l;
-	}
-
-	return offset;
-}
-
-static ssize_t do_write(int fd, const void *buf, size_t count)
-{
-	size_t offset = 0;
-	ssize_t l;
-
-	while (offset < count) {
-		l = write(fd, buf + offset, count - offset);
-		if (l < 0) {
-			if (errno == EAGAIN || errno == EWOULDBLOCK)
-				continue;
-			perror("write");
-			return -1;
-		}
-		offset += l;
-	}
-
-	return offset;
-}
-
-static ssize_t write_zero(int fd, size_t len)
-{
-	size_t i = len;
-
-	while (i--) {
-		const char x = 0;
-		if (do_write(fd, &x, 1) < 0)
-			return -1;
-	}
-
-	return len;
-}
-
-int main(void)
-{
-	DECLARE_HDR(hdr);
-	char boot_program[MAX_BOOT_PROG_LEN];
-	size_t aligned_hdr_len, alligned_prog_len;
-	ssize_t prog_len;
-
-	prog_len = do_read(0, boot_program, sizeof(boot_program));
-	if (prog_len <= 0)
-		return -1;
-
-	aligned_hdr_len = ROUND_UP(sizeof(hdr));
-	hdr.start_address = htole32(START_BASE + aligned_hdr_len);
-	alligned_prog_len = ROUND_UP(prog_len);
-	hdr.copy_size = htole16(aligned_hdr_len + alligned_prog_len);
-
-	if (do_write(1, &hdr, sizeof(hdr)) < 0)
-		return -1;
-	if (write_zero(1, aligned_hdr_len - sizeof(hdr)) < 0)
-		return -1;
-
-	if (do_write(1, boot_program, prog_len) < 0)
-		return 1;
-
-	/* Write out the rest of the kernel */
-	while (1) {
-		prog_len = do_read(0, boot_program, sizeof(boot_program));
-		if (prog_len < 0)
-			return 1;
-		if (prog_len == 0)
-			break;
-		if (do_write(1, boot_program, prog_len) < 0)
-			return 1;
-	}
-
-	return 0;
-}
diff --git a/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt b/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt
deleted file mode 100644
index efff8ae2713d..000000000000
--- a/Documentation/arm/SH-Mobile/zboot-rom-mmcif.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-ROM-able zImage boot from MMC
------------------------------
-
-An ROM-able zImage compiled with ZBOOT_ROM_MMCIF may be written to MMC and
-SuperH Mobile ARM will to boot directly from the MMCIF hardware block.
-
-This is achieved by the mask ROM loading the first portion of the image into
-MERAM and then jumping to it. This portion contains loader code which
-copies the entire image to SDRAM and jumps to it. From there the zImage
-boot code proceeds as normal, uncompressing the image into its final
-location and then jumping to it.
-
-This code has been tested on an AP4EB board using the developer 1A eMMC
-boot mode which is configured using the following jumper settings.
-The board used for testing required a patched mask ROM in order for
-this mode to function.
-
-   8 7 6 5 4 3 2 1
-   x|x|x|x|x| |x|
-S4 -+-+-+-+-+-+-+-
-    | | | | |x| |x on
-
-The zImage must be written to the MMC card at sector 1 (512 bytes) in
-vrl4 format. A utility vrl4 is supplied to accomplish this.
-
-e.g.
-	vrl4 < zImage | dd of=/dev/sdX bs=512 seek=1
-
-A dual-voltage MMC 4.0 card was used for testing.
diff --git a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt b/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
deleted file mode 100644
index 441959846e1a..000000000000
--- a/Documentation/arm/SH-Mobile/zboot-rom-sdhi.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-ROM-able zImage boot from eSD
------------------------------
-
-An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and
-SuperH Mobile ARM will to boot directly from the SDHI hardware block.
-
-This is achieved by the mask ROM loading the first portion of the image into
-MERAM and then jumping to it. This portion contains loader code which
-copies the entire image to SDRAM and jumps to it. From there the zImage
-boot code proceeds as normal, uncompressing the image into its final
-location and then jumping to it.
-
-This code has been tested on an mackerel board using the developer 1A eSD
-boot mode which is configured using the following jumper settings.
-
-   8 7 6 5 4 3 2 1
-   x|x|x|x| |x|x|
-S4 -+-+-+-+-+-+-+-
-    | | | |x| | |x on
-
-The eSD card needs to be present in SDHI slot 1 (CN7).
-As such S1 and S33 also need to be configured as per
-the notes in arch/arm/mach-shmobile/board-mackerel.c.
-
-A partial zImage must be written to physical partition #1 (boot)
-of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to
-accomplish this.
-
-e.g.
-	vrl4 < zImage | dd of=/dev/sdX bs=512 count=17
-
-A full copy of _the same_ zImage should be written to physical partition #1
-(boot) of the eSD at sector 0. This should _not_ be in vrl4 format.
-
-	vrl4 < zImage | dd of=/dev/sdX bs=512
-
-Note: The commands above assume that the physical partition has been
-switched. No such facility currently exists in the Linux Kernel.
-
-Physical partitions are described in the eSD specification.  At the time of
-writing they are not the same as partitions that are typically configured
-using fdisk and visible through /proc/partitions
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index 51147cb5c036..668ed9528fa3 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -7,8 +7,6 @@ SoCs:
     compatible = "renesas,emev2"
   - RZ/A1H (R7S72100)
     compatible = "renesas,r7s72100"
-  - SH-Mobile AP4 (R8A73720/SH7372)
-    compatible = "renesas,sh7372"
   - SH-Mobile AG5 (R8A73A00/SH73A0)
     compatible = "renesas,sh73a0"
   - R-Mobile APE6 (R8A73A40)
@@ -61,8 +59,6 @@ Boards:
     compatible = "renesas,kzm9g-reference", "renesas,sh73a0"
   - Lager (RTP0RC7790SEB00010S)
     compatible = "renesas,lager", "renesas,r8a7790"
-  - Mackerel (R0P7372LC0016RL, AP4 EVM 2nd)
-    compatible = "renesas,mackerel"
   - Marzen
     compatible = "renesas,marzen", "renesas,r8a7779"
 
diff --git a/MAINTAINERS b/MAINTAINERS
index eaf999638a65..c5414a722fe3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1418,7 +1418,6 @@ F:	arch/arm/configs/ape6evm_defconfig
 F:	arch/arm/configs/armadillo800eva_defconfig
 F:	arch/arm/configs/bockw_defconfig
 F:	arch/arm/configs/kzm9g_defconfig
-F:	arch/arm/configs/mackerel_defconfig
 F:	arch/arm/configs/marzen_defconfig
 F:	arch/arm/configs/shmobile_defconfig
 F:	arch/arm/include/debug/renesas-scif.S
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 495fb7ace4d8..55f1d9ba4b20 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1847,35 +1847,6 @@ config ZBOOT_ROM
 	  Say Y here if you intend to execute your compressed kernel image
 	  (zImage) directly from ROM or flash.  If unsure, say N.
 
-choice
-	prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
-	depends on ZBOOT_ROM && ARCH_SH7372
-	default ZBOOT_ROM_NONE
-	help
-	  Include experimental SD/MMC loading code in the ROM-able zImage.
-	  With this enabled it is possible to write the ROM-able zImage
-	  kernel image to an MMC or SD card and boot the kernel straight
-	  from the reset vector. At reset the processor Mask ROM will load
-	  the first part of the ROM-able zImage which in turn loads the
-	  rest the kernel image to RAM.
-
-config ZBOOT_ROM_NONE
-	bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
-	help
-	  Do not load image from SD or MMC
-
-config ZBOOT_ROM_MMCIF
-	bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
-	help
-	  Load image from MMCIF hardware block.
-
-config ZBOOT_ROM_SH_MOBILE_SDHI
-	bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
-	help
-	  Load image from SDHI hardware block
-
-endchoice
-
 config ARM_APPENDED_DTB
 	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
 	depends on OF
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1ca8dc75a745..6e55ed915332 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -821,12 +821,11 @@ choice
 		  via SCIF2 on Renesas R-Car E2 (R8A7794).
 
 	config DEBUG_RMOBILE_SCIFA0
-		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
-		depends on ARCH_R8A73A4 || ARCH_SH7372
+		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
+		depends on ARCH_R8A73A4
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
-		  AP4 (SH7372).
+		  via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).
 
 	config DEBUG_RMOBILE_SCIFA1
 		bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3ea230aa94b7..6e1fb2b2ecc7 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -6,21 +6,6 @@
 
 OBJS		=
 
-# Ensure that MMCIF loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-OBJS		+= mmcif-sh7372.o
-endif
-
-# Ensure that SDHI loader code appears early in the image
-# to minimise that number of bocks that have to be read in
-# order to load it.
-ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
-OBJS		+= sdhi-shmobile.o
-OBJS		+= sdhi-sh7372.o
-endif
-
 AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	+= misc.o decompress.o
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
index e7f80928949c..22a75259faa3 100644
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ b/arch/arm/boot/compressed/head-shmobile.S
@@ -25,36 +25,6 @@
 	/* load board-specific initialization code */
 #include <mach/zboot.h>
 
-#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
-	/* Load image from MMC/SD */
-	adr	sp, __tmp_stack + 256
-	ldr	r0, __image_start
-	ldr	r1, __image_end
-	subs	r1, r1, r0
-	ldr	r0, __load_base
-	bl	mmc_loader
-
-	/* Jump to loaded code */
-	ldr	r0, __loaded
-	ldr	r1, __image_start
-	sub	r0, r0, r1
-	ldr	r1, __load_base
-	add	pc, r0, r1
-
-__image_start:
-	.long	_start
-__image_end:
-	.long	_got_end
-__load_base:
-	.long	MEMORY_START + 0x02000000 @ Load at 32Mb into SDRAM
-__loaded:
-	.long	__continue
-	.align
-__tmp_stack:
-	.space	256
-__continue:
-#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
-
 	adr	r0, dtb_info
 	ldmia	r0, {r1, r3, r4, r5, r7}
 
diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c
deleted file mode 100644
index 672ae95db5c3..000000000000
--- a/arch/arm/boot/compressed/mmcif-sh7372.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * sh7372 MMCIF loader
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/boot.h>
-#include <mach/mmc.h>
-
-#define MMCIF_BASE      (void __iomem *)0xe6bd0000
-
-#define PORT84CR	(void __iomem *)0xe6050054
-#define PORT85CR	(void __iomem *)0xe6050055
-#define PORT86CR	(void __iomem *)0xe6050056
-#define PORT87CR	(void __iomem *)0xe6050057
-#define PORT88CR	(void __iomem *)0xe6050058
-#define PORT89CR	(void __iomem *)0xe6050059
-#define PORT90CR	(void __iomem *)0xe605005a
-#define PORT91CR	(void __iomem *)0xe605005b
-#define PORT92CR	(void __iomem *)0xe605005c
-#define PORT99CR	(void __iomem *)0xe6050063
-
-#define SMSTPCR3	(void __iomem *)0xe615013c
-
-/* SH7372 specific MMCIF loader
- *
- * loads the zImage from an MMC card starting from block 1.
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 2 (=byte 1024) on the media
- *
- * Use the following line to write the vrl4 formated zImage
- * to an MMC card
- * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
- */
-asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
-{
-	mmc_init_progress();
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-
-	/* Initialise MMC
-	 * registers: PORT84CR-PORT92CR
-	 *            (MMCD0_0-MMCD0_7,MMCCMD0 Control)
-	 * value: 0x04 - select function 4
-	 */
-	 __raw_writeb(0x04, PORT84CR);
-	 __raw_writeb(0x04, PORT85CR);
-	 __raw_writeb(0x04, PORT86CR);
-	 __raw_writeb(0x04, PORT87CR);
-	 __raw_writeb(0x04, PORT88CR);
-	 __raw_writeb(0x04, PORT89CR);
-	 __raw_writeb(0x04, PORT90CR);
-	 __raw_writeb(0x04, PORT91CR);
-	 __raw_writeb(0x04, PORT92CR);
-
-	/* Initialise MMC
-	 * registers: PORT99CR (MMCCLK0 Control)
-	 * value: 0x10 | 0x04 - enable output | select function 4
-	 */
-	__raw_writeb(0x14, PORT99CR);
-
-	/* Enable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_INIT);
-
-	/* setup MMCIF hardware */
-	sh_mmcif_boot_init(MMCIF_BASE);
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-
-	/* load kernel via MMCIF interface */
-	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
-			      (len + SH_MMCIF_BBS - 1) / SH_MMCIF_BBS, buf);
-
-
-	/* Disable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-}
diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c
deleted file mode 100644
index d279294f2381..000000000000
--- a/arch/arm/boot/compressed/sdhi-sh7372.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <mach/mmc.h>
-#include <linux/mmc/boot.h>
-#include <linux/mmc/tmio.h>
-
-#include "sdhi-shmobile.h"
-
-#define PORT179CR       0xe60520b3
-#define PORT180CR       0xe60520b4
-#define PORT181CR       0xe60520b5
-#define PORT182CR       0xe60520b6
-#define PORT183CR       0xe60520b7
-#define PORT184CR       0xe60520b8
-
-#define SMSTPCR3        0xe615013c
-
-#define CR_INPUT_ENABLE 0x10
-#define CR_FUNCTION1    0x01
-
-#define SDHI1_BASE	(void __iomem *)0xe6860000
-#define SDHI_BASE	SDHI1_BASE
-
-/*  SuperH Mobile SDHI loader
- *
- * loads the zImage from an SD card starting from block 0
- * on physical partition 1
- *
- * The image must be start with a vrl4 header and
- * the zImage must start at offset 512 of the image. That is,
- * at block 1 (=byte 512) of physical partition 1
- *
- * Use the following line to write the vrl4 formated zImage
- * to an SD card
- * # dd if=vrl4.out of=/dev/sdx bs=512
- */
-asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
-{
-	int high_capacity;
-
-	mmc_init_progress();
-
-	mmc_update_progress(MMC_PROGRESS_ENTER);
-        /* Initialise SDHI1 */
-        /* PORT184CR: GPIO_FN_SDHICMD1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT184CR);
-        /* PORT179CR: GPIO_FN_SDHICLK1 Control */
-        __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
-        /* PORT181CR: GPIO_FN_SDHID1_3 Control */
-        __raw_writeb(CR_FUNCTION1, PORT183CR);
-        /* PORT182CR: GPIO_FN_SDHID1_2 Control */
-        __raw_writeb(CR_FUNCTION1, PORT182CR);
-        /* PORT183CR: GPIO_FN_SDHID1_1 Control */
-        __raw_writeb(CR_FUNCTION1, PORT181CR);
-        /* PORT180CR: GPIO_FN_SDHID1_0 Control */
-        __raw_writeb(CR_FUNCTION1, PORT180CR);
-
-        /* Enable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
-
-	/* setup SDHI hardware */
-	mmc_update_progress(MMC_PROGRESS_INIT);
-	high_capacity = sdhi_boot_init(SDHI_BASE);
-	if (high_capacity < 0)
-		goto err;
-
-	mmc_update_progress(MMC_PROGRESS_LOAD);
-	/* load kernel */
-	if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
-			      0, /* Kernel is at block 1 */
-			      (len + TMIO_BBS - 1) / TMIO_BBS, buf))
-		goto err;
-
-        /* Disable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
-
-	mmc_update_progress(MMC_PROGRESS_DONE);
-
-	return;
-err:
-	for(;;);
-}
diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c
deleted file mode 100644
index bd3d46980955..000000000000
--- a/arch/arm/boot/compressed/sdhi-shmobile.c
+++ /dev/null
@@ -1,449 +0,0 @@
-/*
- * SuperH Mobile SDHI
- *
- * Copyright (C) 2010 Magnus Damm
- * Copyright (C) 2010 Kuninori Morimoto
- * Copyright (C) 2010 Simon Horman
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Parts inspired by u-boot
- */
-
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/core.h>
-#include <linux/mmc/mmc.h>
-#include <linux/mmc/sd.h>
-#include <linux/mmc/tmio.h>
-#include <mach/sdhi.h>
-
-#define OCR_FASTBOOT		(1<<29)
-#define OCR_HCS			(1<<30)
-#define OCR_BUSY		(1<<31)
-
-#define RESP_CMD12		0x00000030
-
-static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
-{
-        return __raw_readw(base + addr);
-}
-
-static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
-{
-	return __raw_readw(base + addr) |
-	       __raw_readw(base + addr + 2) << 16;
-}
-
-static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
-{
-	__raw_writew(val, base + addr);
-}
-
-static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
-{
-	__raw_writew(val, base + addr);
-	__raw_writew(val >> 16, base + addr + 2);
-}
-
-#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL |		\
-		   TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT |	\
-		   TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN |	\
-		   TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS |	\
-		   TMIO_STAT_ILL_FUNC)
-
-static int sdhi_intr(void __iomem *base)
-{
-	unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
-
-	if (state & ALL_ERROR) {
-		sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				ALL_ERROR |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return -EINVAL;
-	}
-	if (state & TMIO_STAT_CMDRESPEND) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_CMDRESPEND |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		return 0;
-	}
-	if (state & TMIO_STAT_RXRDY) {
-		sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
-		sd_ctrl_write32(base, CTL_IRQ_MASK,
-				TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
-				sd_ctrl_read32(base, CTL_IRQ_MASK));
-		ret