diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-21 10:59:54 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-09-21 10:59:54 -0700 |
commit | 4553d469d6f88028f185de57e771dd29aba10d90 (patch) | |
tree | 5659abd8b749db6d728a2c852f678548110dcfa5 | |
parent | 6cb2e9ee51b5f1539f027346a02904e282b87d4d (diff) | |
parent | 2cfcfadb8e1380938d6631cffa4fa567b13f52b2 (diff) |
Merge tag 'mtd/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- add debugfs nodes for querying the flash name and id
- mtd parser reorganization
SPI NOR core changes:
- always use bounce buffer for register read/writes
- move m25p80 code in spi-nor.c
- rework hwcaps selection for the spi-mem case
- rework the core in order to move the manufacturer specific code out
of it:
- regroup flash parameters in 'struct spi_nor_flash_parameter'
- add default_init() and post_sfdp() hooks to tweak the flash
parameters
- introduce the ->set_4byte(), ->convert_addr() and ->setup()
methods, to deal with manufacturer specific code
- rework the SPI NOR lock/unlock logic
- fix an error code in spi_nor_read_raw()
- fix a memory leak bug
- enable the debugfs for the partname and partid
- add support for few flashes
SPI NOR controller drivers changes:
- intel-spi:
- Whitelist 4B read commands
- Add support for Intel Tiger Lake SPI serial flash
- aspeed-smc: Add of_node_put()
- hisi-sfc: add of_node_put()
- cadence-quadspi: Fix QSPI RCU Schedule Stall
NAND core:
- Fixing typos
- Adding missing of_node_put() in various drivers
Raw NAND controller drivers:
- Macronix: new controller driver
- Omap2: fix the number of bitflips returned
- Brcmnand: fix a pointer not iterating over all the page chunks
- W90x900: driver removed
- Onenand: fix a memory leak
- Sharpsl: missing include guard
- STM32: avoid warnings when building with W=1
- Ingenic: fix a coccinelle warning
- r852: call a helper to simplify the code
CFI core:
- Kill useless initializer in mtd_do_chip_probe()
- Fix a rare write failure seen on some cfi_cmdset_0002 compliant
Parallel NORs
- Bunch of cleanups for cfi_cmdset_0002 driver's write functions by
Tokunori Ikegami"
* tag 'mtd/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (77 commits)
mtd: pmc551: Remove set but not used variable 'soff_lo'
mtd: cfi_cmdset_0002: Fix do_erase_chip() to get chip as erasing mode
mtd: sm_ftl: Fix memory leak in sm_init_zone() error path
mtd: parsers: Move CMDLINE parser
mtd: parsers: Move OF parser
mtd: parsers: Move BCM63xx parser
mtd: parsers: Move BCM47xx parser
mtd: parsers: Move TI AR7 parser
mtd: pismo: Simplify getting the adapter of a client
mtd: phram: Module parameters add writable permissions
mtd: pxa2xx: Use ioremap_cache insted of ioremap_cached
mtd: spi-nor: Rename "n25q512a" to "mt25qu512a (n25q512a)"
mtd: spi-nor: Add support for mt35xu02g
mtd: rawnand: omap2: Fix number of bitflips reporting with ELM
mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfips
mtd: spi-nor: remove superfluous pass of nor->info->sector_size
mtd: spi-nor: enable the debugfs for the partname and partid
mtd: mtdcore: add debugfs nodes for querying the flash name and id
mtd: spi-nor: hisi-sfc: Add of_node_put() before break
mtd: spi-nor: aspeed-smc: Add of_node_put()
...
48 files changed, 2527 insertions, 1497 deletions
diff --git a/Documentation/devicetree/bindings/mtd/mxic-nand.txt b/Documentation/devicetree/bindings/mtd/mxic-nand.txt new file mode 100644 index 000000000000..46c55295a3e6 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/mxic-nand.txt @@ -0,0 +1,36 @@ +Macronix Raw NAND Controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible: should be "mxic,multi-itfc-v009-nand-controller" +- reg: should contain 1 entry for the registers +- #address-cells: should be set to 1 +- #size-cells: should be set to 0 +- interrupts: interrupt line connected to this raw NAND controller +- clock-names: should contain "ps", "send" and "send_dly" +- clocks: should contain 3 phandles for the "ps", "send" and + "send_dly" clocks + +Children nodes: +- children nodes represent the available NAND chips. + +See Documentation/devicetree/bindings/mtd/nand-controller.yaml +for more details on generic bindings. + +Example: + + nand: nand-controller@43c30000 { + compatible = "mxic,multi-itfc-v009-nand-controller"; + reg = <0x43c30000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 0x1d IRQ_TYPE_EDGE_RISING>; + clocks = <&clkwizard 0>, <&clkwizard 1>, <&clkc 15>; + clock-names = "send", "send_dly", "ps"; + + nand@0 { + reg = <0>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "bch"; + }; + }; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 80a6e2dcd085..42d401ea60ee 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -23,73 +23,6 @@ config MTD_TESTS WARNING: some of the tests will ERASE entire MTD device which they test. Do not use these tests unless you really know what you do. -config MTD_CMDLINE_PARTS - tristate "Command line partition table parsing" - depends on MTD - help - Allow generic configuration of the MTD partition tables via the kernel - command line. Multiple flash resources are supported for hardware where - different kinds of flash memory are available. - - You will still need the parsing functions to be called by the driver - for your particular device. It won't happen automatically. The - SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for - example. - - The format for the command line is as follows: - - mtdparts=<mtddef>[;<mtddef] - <mtddef> := <mtd-id>:<partdef>[,<partdef>] - <partdef> := <size>[@offset][<name>][ro] - <mtd-id> := unique id used in mapping driver/device - <size> := standard linux memsize OR "-" to denote all - remaining space - <name> := (NAME) - - Due to the way Linux handles the command line, no spaces are - allowed in the partition definition, including mtd id's and partition - names. - - Examples: - - 1 flash resource (mtd-id "sa1100"), with 1 single writable partition: - mtdparts=sa1100:- - - Same flash, but 2 named partitions, the first one being read-only: - mtdparts=sa1100:256k(ARMboot)ro,-(root) - - If unsure, say 'N'. - -config MTD_OF_PARTS - tristate "OpenFirmware partitioning information support" - default y - depends on OF - help - This provides a partition parsing function which derives - the partition map from the children of the flash node, - as described in Documentation/devicetree/bindings/mtd/partition.txt. - -config MTD_AR7_PARTS - tristate "TI AR7 partitioning support" - help - TI AR7 partitioning support - -config MTD_BCM63XX_PARTS - tristate "BCM63XX CFE partitioning support" - depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST - select CRC32 - select MTD_PARSER_IMAGETAG - help - This provides partition parsing for BCM63xx devices with CFE - bootloaders. - -config MTD_BCM47XX_PARTS - tristate "BCM47XX partitioning support" - depends on BCM47XX || ARCH_BCM_5301X - help - This provides partitions parser for devices based on BCM47xx - boards. - menu "Partition parsers" source "drivers/mtd/parsers/Kconfig" endmenu diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index 62d649a959e2..56cc60ccc477 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -7,11 +7,6 @@ obj-$(CONFIG_MTD) += mtd.o mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o -obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o -obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o -obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o -obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o -obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o obj-y += parsers/ # 'Users' - code which presents functionality to userspace. diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index f4da7bd552e9..cf8c8be40a9c 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -61,7 +61,9 @@ static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +#if !FORCE_WORD_WRITE static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +#endif static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); static void cfi_amdstd_sync (struct mtd_info *); @@ -256,6 +258,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd) } #endif +#if !FORCE_WORD_WRITE static void fixup_use_write_buffers(struct mtd_info *mtd) { struct map_info *map = mtd->priv; @@ -265,6 +268,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) mtd->_write = cfi_amdstd_write_buffers; } } +#endif /* !FORCE_WORD_WRITE */ /* Atmel chips don't use the same PRI format as AMD chips */ static void fixup_convert_atmel_pri(struct mtd_info *mtd) @@ -1637,11 +1641,11 @@ static int cfi_amdstd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, do_otp_lock, 1); } -static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, - unsigned long adr, map_word datum, - int mode) +static int __xipram do_write_oneword_once(struct map_info *map, + struct flchip *chip, + unsigned long adr, map_word datum, + int mode, struct cfi_private *cfi) { - struct cfi_private *cfi = map->fldrv_priv; unsigned long timeo = jiffies + HZ; /* * We use a 1ms + 1 jiffies generic timeout for writes (most devices @@ -1654,42 +1658,7 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, */ unsigned long uWriteTimeout = (HZ / 1000) + 1; int ret = 0; - map_word oldd; - int retry_cnt = 0; - - adr += chip->start; - - mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr, mode); - if (ret) { - mutex_unlock(&chip->mutex); - return ret; - } - - pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", - __func__, adr, datum.x[0]); - - if (mode == FL_OTP_WRITE) - otp_enter(map, chip, adr, map_bankwidth(map)); - - /* - * Check for a NOP for the case when the datum to write is already - * present - it saves time and works around buggy chips that corrupt - * data at other locations when 0xff is written to a location that - * already contains 0xff. - */ - oldd = map_read(map, adr); - if (map_word_equal(map, oldd, datum)) { - pr_debug("MTD %s(): NOP\n", - __func__); - goto op_done; - } - XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); - ENABLE_VPP(map); - xip_disable(map, chip, adr); - - retry: cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, cfi->device_type, NULL); cfi_send_gen_cmd(0xA0, cfi->addr_unlock1, chip->start, map, cfi, cfi->device_type, NULL); @@ -1717,40 +1686,125 @@ static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, continue; } + /* + * We check "time_after" and "!chip_good" before checking + * "chip_good" to avoid the failure due to scheduling. + */ if (time_after(jiffies, timeo) && - !chip_ready(map, chip, adr)) { + !chip_good(map, chip, adr, datum)) { xip_enable(map, chip, adr); printk(KERN_WARNING "MTD %s(): software timeout\n", __func__); xip_disable(map, chip, adr); + ret = -EIO; break; } - if (chip_ready(map, chip, adr)) + if (chip_good(map, chip, adr, datum)) break; /* Latency issues. Drop the lock, wait a while and retry */ UDELAY(map, chip, adr, 1); } - /* Did we succeed? */ - if (!chip_good(map, chip, adr, datum)) { - /* reset on all failures. */ - cfi_check_err_status(map, chip, adr); - map_write(map, CMD(0xF0), chip->start); - /* FIXME - should have reset delay before continuing */ - if (++retry_cnt <= MAX_RETRIES) - goto retry; + return ret; +} - ret = -EIO; +static int __xipram do_write_oneword_start(struct map_info *map, + struct flchip *chip, + unsigned long adr, int mode) +{ + int ret = 0; + + mutex_lock(&chip->mutex); + + ret = get_chip(map, chip, adr, mode); + if (ret) { + mutex_unlock(&chip->mutex); + return ret; } - xip_enable(map, chip, adr); - op_done: + + if (mode == FL_OTP_WRITE) + otp_enter(map, chip, adr, map_bankwidth(map)); + + return ret; +} + +static void __xipram do_write_oneword_done(struct map_info *map, + struct flchip *chip, + unsigned long adr, int mode) +{ if (mode == FL_OTP_WRITE) otp_exit(map, chip, adr, map_bankwidth(map)); + chip->state = FL_READY; DISABLE_VPP(map); put_chip(map, chip, adr); + mutex_unlock(&chip->mutex); +} + +static int __xipram do_write_oneword_retry(struct map_info *map, + struct flchip *chip, + unsigned long adr, map_word datum, + int mode) +{ + struct cfi_private *cfi = map->fldrv_priv; + int ret = 0; + map_word oldd; + int retry_cnt = 0; + + /* + * Check for a NOP for the case when the datum to write is already + * present - it saves time and works around buggy chips that corrupt + * data at other locations when 0xff is written to a location that + * already contains 0xff. + */ + oldd = map_read(map, adr); + if (map_word_equal(map, oldd, datum)) { + pr_debug("MTD %s(): NOP\n", __func__); + return ret; + } + + XIP_INVAL_CACHED_RANGE(map, adr, map_bankwidth(map)); + ENABLE_VPP(map); + xip_disable(map, chip, adr); + + retry: + ret = do_write_oneword_once(map, chip, adr, datum, mode, cfi); + if (ret) { + /* reset on all failures. */ + cfi_check_err_status(map, chip, adr); + map_write(map, CMD(0xF0), chip->start); + /* FIXME - should have reset delay before continuing */ + + if (++retry_cnt <= MAX_RETRIES) { + ret = 0; + goto retry; + } + } + xip_enable(map, chip, adr); + + return ret; +} + +static int __xipram do_write_oneword(struct map_info *map, struct flchip *chip, + unsigned long adr, map_word datum, + int mode) +{ + int ret = 0; + + adr += chip->start; + + pr_debug("MTD %s(): WRITE 0x%.8lx(0x%.8lx)\n", __func__, adr, + datum.x[0]); + + ret = do_write_oneword_start(map, chip, adr, mode); + if (ret) + return ret; + + ret = do_write_oneword_retry(map, chip, adr, datum, mode); + + do_write_oneword_done(map, chip, adr, mode); return ret; } @@ -1879,6 +1933,78 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +#if !FORCE_WORD_WRITE +static int __xipram do_write_buffer_wait(struct map_info *map, + struct flchip *chip, unsigned long adr, + map_word datum) +{ + unsigned long timeo; + unsigned long u_write_timeout; + int ret = 0; + + /* + * Timeout is calculated according to CFI data, if available. + * See more comments in cfi_cmdset_0002(). + */ + u_write_timeout = usecs_to_jiffies(chip->buffer_write_time_max); + timeo = jiffies + u_write_timeout; + + for (;;) { + if (chip->state != FL_WRITING) { + /* Someone's suspended the write. Sleep */ + DECLARE_WAITQUEUE(wait, current); + + set_current_state(TASK_UNINTERRUPTIBLE); + add_wait_queue(&chip->wq, &wait); + mutex_unlock(&chip->mutex); + schedule(); + remove_wait_queue(&chip->wq, &wait); + timeo = jiffies + (HZ / 2); /* FIXME */ + mutex_lock(&chip->mutex); + continue; + } + + /* + * We check "time_after" and "!chip_good" before checking + * "chip_good" to avoid the failure due to scheduling. + */ + if (time_after(jiffies, timeo) && + !chip_good(map, chip, adr, datum)) { + ret = -EIO; + break; + } + + if (chip_good(map, chip, adr, datum)) + break; + + /* Latency issues. Drop the lock, wait a while and retry */ + UDELAY(map, chip, adr, 1); + } + + return ret; +} + +static void __xipram do_write_buffer_reset(struct map_info *map, + struct flchip *chip, + struct cfi_private *cfi) +{ + /* + * Recovery from write-buffer programming failures requires + * the write-to-buffer-reset sequence. Since the last part + * of the sequence also works as a normal reset, we can run + * the same commands regardless of why we are here. + * See e.g. + * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf + */ + cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, + cfi->device_type, NULL); + cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, + cfi->device_type, NULL); + + /* FIXME - should have reset delay before continuing */ +} /* * FIXME: interleaved mode not tested, and probably not supported! @@ -1888,13 +2014,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, int len) { struct cfi_private *cfi = map->fldrv_priv; - unsigned long timeo = jiffies + HZ; - /* - * Timeout is calculated according to CFI data, if available. - * See more comments in cfi_cmdset_0002(). - */ - unsigned long uWriteTimeout = - usecs_to_jiffies(chip->buffer_write_time_max); int ret = -EIO; unsigned long cmd_adr; int z, words; @@ -1951,63 +2070,16 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, adr, map_bankwidth(map), chip->word_write_time); - timeo = jiffies + uWriteTimeout; - - for (;;) { - if (chip->state != FL_WRITING) { - /* Someone's suspended the write. Sleep */ - DECLARE_WAITQUEUE(wait, current); - - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&chip->wq, &wait); - mutex_unlock(&chip->mutex); - schedule(); - remove_wait_queue(&chip->wq, &wait); - timeo = jiffies + (HZ / 2); /* FIXME */ - mutex_lock(&chip->mutex); - continue; - } - - /* - * We check "time_after" and "!chip_good" before checking "chip_good" to avoid - * the failure due to scheduling. - */ - if (time_after(jiffies, timeo) && - !chip_good(map, chip, adr, datum)) - break; - - if (chip_good(map, chip, adr, datum)) { - xip_enable(map, chip, adr); - goto op_done; - } - - /* Latency issues. Drop the lock, wait a while and retry */ - UDELAY(map, chip, adr, 1); + ret = do_write_buffer_wait(map, chip, adr, datum); + if (ret) { + cfi_check_err_status(map, chip, adr); + do_write_buffer_reset(map, chip, cfi); + pr_err("MTD %s(): software timeout, address:0x%.8lx.\n", + __func__, adr); } - /* - * Recovery from write-buffer programming failures requires - * the write-to-buffer-reset sequence. Since the last part - * of the sequence also works as a normal reset, we can run - * the same commands regardless of why we are here. - * See e.g. - * http://www.spansion.com/Support/Application%20Notes/MirrorBit_Write_Buffer_Prog_Page_Buffer_Read_AN.pdf - */ - cfi_check_err_status(map, chip, adr); - cfi_send_gen_cmd(0xAA, cfi->addr_unlock1, chip->start, map, cfi, - cfi->device_type, NULL); - cfi_send_gen_cmd(0x55, cfi->addr_unlock2, chip->start, map, cfi, - cfi->device_type, NULL); - cfi_send_gen_cmd(0xF0, cfi->addr_unlock1, chip->start, map, cfi, - cfi->device_type, NULL); xip_enable(map, chip, adr); - /* FIXME - should have reset delay before continuing */ - printk(KERN_WARNING "MTD %s(): software timeout, address:0x%.8lx.\n", - __func__, adr); - - ret = -EIO; - op_done: chip->state = FL_READY; DISABLE_VPP(map); put_chip(map, chip, adr); @@ -2091,6 +2163,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, return 0; } +#endif /* !FORCE_WORD_WRITE */ /* * Wait for the flash chip to become ready to write data @@ -2344,7 +2417,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) adr = cfi->addr_unlock1; mutex_lock(&chip->mutex); - ret = get_chip(map, chip, adr, FL_WRITING); + ret = get_chip(map, chip, adr, FL_ERASING); if (ret) { mutex_unlock(&chip->mutex); return ret; diff --git a/drivers/mtd/chips/gen_probe.c b/drivers/mtd/chips/gen_probe.c index 839ed40625d6..e5bd3c2bc3b2 100644 --- a/drivers/mtd/chips/gen_probe.c +++ b/drivers/mtd/chips/gen_probe.c @@ -20,7 +20,7 @@ static int genprobe_new_chip(struct map_info *map, struct chip_probe *cp, struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp) { - struct mtd_info *mtd = NULL; + struct mtd_info *mtd; struct cfi_private *cfi; /* First probe the map to see if we have CFI stuff there. */ diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 49abbc52457d..f96287c4b789 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -79,24 +79,6 @@ config MTD_DATAFLASH_OTP other key product data. The second half is programmed with a unique-to-each-chip bit pattern at the factory. -config MTD_M25P80 - tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" - depends on SPI_MASTER && MTD_SPI_NOR - select SPI_MEM - help - This enables access to most modern SPI flash chips, used for - program and data storage. Series supported include Atmel AT26DF, - Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips - are supported as well. See the driver source for the current list, - or to add other chips. - - Note that the original DataFlash chips (AT45 series, not AT26DF), - need an entirely different driver. - - Set up your spi devices with the right board-specific platform data, - if you want to specify device partitioning or to use a device which - doesn't support the JEDEC ID instruction. - config MTD_MCHP23K256 tristate "Microchip 23K256 SRAM" depends on SPI_MASTER diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index 94895eab3066..991c8d12c016 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MTD_MTDRAM) += mtdram.o obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o -obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_MCHP23K256) += mchp23k256.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c deleted file mode 100644 index c50888670250..000000000000 --- a/drivers/mtd/devices/m25p80.c +++ /dev/null @@ -1,347 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * MTD SPI driver for ST M25Pxx (and similar) serial flash chips - * - * Author: Mike Lavender, mike@steroidmicros.com - * - * Copyright (c) 2005, Intec Automation Inc. - * - * Some parts are based on lart.c by Abraham Van Der Merwe - * - * Cleaned up and generalized based on mtd_dataflash.c - */ - -#include <linux/err.h> -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/device.h> - -#include |