diff options
author | Hisham Muhammad <hisham@gobolinux.org> | 2011-09-24 00:30:47 +0000 |
---|---|---|
committer | Hisham Muhammad <hisham@gobolinux.org> | 2011-09-24 00:30:47 +0000 |
commit | ec17b7029a5f5f2e42d66380762ab24fa5174fc4 (patch) | |
tree | 39de052be8fcdbb1a58150eedde74bfbc0d5b92c /plpa-1.3.2/README | |
parent | d07b043ee07caa5da9e93a5a2ca9165ff98f85d7 (diff) |
Convert affinity control from the deprecated PLPA to HWLOC
Diffstat (limited to 'plpa-1.3.2/README')
-rw-r--r-- | plpa-1.3.2/README | 659 |
1 files changed, 0 insertions, 659 deletions
diff --git a/plpa-1.3.2/README b/plpa-1.3.2/README deleted file mode 100644 index ac794ed7..00000000 --- a/plpa-1.3.2/README +++ /dev/null @@ -1,659 +0,0 @@ -Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana - University Research and Technology - Corporation. All rights reserved. -Copyright (c) 2004-2005 The Regents of the University of California. - All rights reserved. -Copyright (c) 2006-2008 Cisco Systems, Inc. All rights reserved. -$COPYRIGHT$ - -See LICENSE file for a rollup of all copyright notices. - -$HEADER$ - -=========================================================================== - -This is the Portable Linux Processor Affinity (PLPA) package -(pronounced "pli-pa"). The PLPA has evolved over time to provide the -following capabilities: - -1. Provide a stable API on Linux for processor affinity (Linux has - provided three different API signatures over time). -2. Provide a simple API that translates between Linux processor ID and - (socket ID, core ID) tuples, and allows querying processor topology - information on supported platforms. -3. Provide a command-line executable (plpa-taskset(1)) that provides - all the same functionality as the venerable taskset(1) command, and - several extensions, including the ability to bind processes to - specific (socket, core) tuples on supported platforms. - -Note that the PLPA is fully embeddable, meaning that it can be wholly -contained in larger software packages that wish to have a single, -stable version of processor affinity API functionality. See below for -more details on embedding. - -Also note that PLPA's socket/core and other topology information is -only available on certain platforms. Specifically, PLPA reads the -/sys filesystem to glean its information; if your system does not -export processor topology information through /sys, the PLPA cannot -provide that information. For example, AMD/Intel processor topology -support was included in Linux kernel v2.6.16, but POWER processor -topology information is not yet supported as of Linux kernel v2.6.26. - -In a world where the processor counts in hosts are [again] increasing, -particularly where at least some of them are NUMA-based architectures, -processor affinity is becoming more important. We hope that the PLPA -is helpful to you. Enjoy. - -Note that if you're looking into processor affinity, and if you're on -a NUMA machine, you probably also want to look into libnuma: - - ftp://ftp.suse.com/pub/people/ak/numa/ - -If you are a developer, keep reading. If you are a system -administrator or other end-user, you're probably more interested in -using the plpa-info(1) and plpa-taskset(1) executable commands; see -the output of "plpa-info" and "plpa-taskset --help" for more -information. - -=========================================================================== - -The following text is specific technical information about the -original problem that PLPA Was created to solve. - -The original intent for the PLPA was for developers who wished to use -Linux processor affinity via the sched_setaffinity() and -sched_getaffinity() library calls, but don't want to wade through the -morass of 3 different APIs that have been offered through the life of -these calls in various Linux distributions and glibc versions. - -Specifically, to compile for any given Linux system, you need some -complex compile-time tests to figure out which of the 3 APIs to use. -And if you want your application to be binary portable across -different Linux distributions, more complex run-time tests (and horrid -compile-time trickery) are required to figure out which API the system -you are running on uses. - -These problems all stem from the fact that the same 2 symbols have had -three different APIs (with different numbers and types of -parameters) throughout their life in Linux. Ick. - -The PLPA is an attempt to solve this problem by providing a single API -that developers can write to. It provides three things: - -1. A single API that developers can write to, regardless of what - back-end API the system you are compiling on has. -2. A run-time test and dispatch that will invoke the Right back-end - API depending on what back-end API the system you are running on - has. -3. Mapping information between (socket ID, core ID) tuples and Linux - virtual processor IDs. - -=========================================================================== - -What, exactly, is the problem? History. ----------------------------------------- - -There are at least 3 different ways that sched_setaffinity is -implemented in glibc (only one of which is documented in the -sched_setaffinity(2) man page), and some corresponding changes -to what the kernel considers to be valid arguments: - -1. int sched_setaffinity(pid_t pid, unsigned int len, unsigned - long *mask); - -This originated in the time period of 2.5 kernels and some distros -back-ported it to their 2.4 kernels and libraries. It's unknown if -this version was ever packaged with any 2.6 kernels. - -2. int sched_setaffinity (pid_t __pid, size_t __cpusetsize, - const cpu_set_t *__cpuset); - -This appears to be in recent distros using 2.6 kernels. We don't -know exactly when #1 changed into #2. However, this prototype is nice -because the cpu_set_t type is accompanied by fdset-like CPU_ZERO(), -CPU_SET(), CPU_ISSET(), etc. macros. - -3. int sched_setaffinity (pid_t __pid, const cpu_set_t *__mask); - -(note the missing len parameter) This is in at least some Linux -distros (e.g., MDK 10.0 with a 2.6.3 kernel, and SGI Altix, even -though the Altix uses a 2.4-based kernel and therefore likely -back-ported the 2.5 work or originated it in the first place). -Similar to #2, the cpu_set_t type is accompanied by fdset-like -CPU_ZERO(), CPU_SET(), CPU_ISSET(), etc. macros. - -But wait, it gets worse. - -Remember that getting/setting processor affinity has to involve the -kernel. The sched_[sg]etaffinity() glibc functions typically do a -little error checking and then make a syscall down into the kernel to -actually do the work. There are multiple possibilities for problems -here as the amount of checking has changed: - -1. The glibc may support the affinity functions, but the kernel may - not (and vice versa). - - This is typically only an issue with slightly older Linux distributions. - Mandrake 9.2 is an example of this. PLPA can detect this at run-time - and turn its internal functions into no-ops and return appropriate error - codes (ENOSYS). - -2. The glibc affinity functions may be buggy (i.e., they pass bad data - down to the syscall). - - This is fortunately restricted to some older versions of glibc, and - is relatively easy to check for at run-time. PLPA reliably detects - this situation at run-time and returns appropriate error codes - (ENOSYS). - - The original SuSE 9.1 version seems to have this problem, but it was - fixed it somewhere in the SuSE patching history (it is unknown exactly - when). Specifically, updating to the latest SuSE 9.1 patch level - (as of Dec 2005) seems to fix the problem. - -3. The CPU_* macros for manipulating cpu_set_t bitmasks may not - compile because of typo bugs in system header files. - - PLPA avoids this problem by providing its own PLPA_CPU_* macros for - manipulating CPU bitmasks. See "How do I use PLPA?", below, for - more details. - -The PLPA avoids all the glibc issues by using syscall() to directly -access the kernel set and get affinity functions. This is described -below. - -=========================================================================== - -How does PLPA work? -------------------- - -Jeff Squyres initially sent a mail to the Open MPI developer's mailing -list explaining the Linux processor affinity problems and asking for -help coming up with a solution (particularly for binary -compatibility): - - http://www.open-mpi.org/community/lists/devel/2005/11/0558.php - -Discussion on that thread and others eventually resulted in the -run-time tests that form the heart of the PLPA. Many thanks to Paul -Hargrove and Bogdan Costescu for their time and effort to get these -tests right. - -PLPA was written so that other developers who want to use processor -affinity in Linux don't have to go through this mess. The PLPA -provides a single interface that can be used on any platform, -regardless of which back-end API variant it has. This includes both -the sched_setaffinity() and sched_getaffinity() calls as well as the -CPU_*() macros. - -The PLPA avoids glibc altogether -- although tests were developed that -could *usually* figure out which glibc variant to use at run time, -there were still some cases where it was either impossible to -determine or the glibc interface itself was buggy. Hence, it was -decided that a simpler approach was simply to use syscall() to invoke -the back-end kernel functions directly. - -The kernel functions have gone through a few changes as well, so the -PLPA does a few run-time tests to determine which variant to use -before actually invoking the back-end functions with the -user-specified arguments. - -NOTE: The run-time tests that the PLPA performs involve getting the -current affinity for the process in question and then attempting to -set them back to the same value. By definition, this introduces a -race condition (there is no atomic get-and-set functionality for -processor affinity). The PLPA cannot guarantee consistent results if -multiple entities (such as multiple threads or multiple processes) are -setting the affinity for a process at the same time. In a worst case -scenario, the PLPA may actually determine that it cannot determine the -kernel variant at run time if another entity modifies a process' -affinity while PLPA is executing its run-time tests. - -=========================================================================== - -Does PLPA make truly portable binaries? ---------------------------------------- - -As much as Linux binaries are portable, yes. That is, if you have -within your power to make a binary that is runnable on several -different Linux distributions/versions/etc., then you may run into -problems with the Linux processor affinity functions. PLPA attempts -to solve this problem for you by *also* making the Linux processor -affinity calls be binary portable. - -Hence, you need to start with something that is already binary -portable (perhaps linking everything statically) -- then PLPA will be -of help to you. Do not fall into the misconception that PLPA will -magically make your executable be binary portable between different -Linux variants. - -=========================================================================== - -How do I use PLPA? ------------------- - -There are three main uses of the PLPA: - -1. Using the plpa-info(1) executable to check if your system supports - processor affinity and the PLPA can determine which to use at - run-time. -2. Developers using the PLPA library both to enable source and binary - Linux processor affinity portability, and to write - processor-topology-aware applications. -3. Using the plpa-taskset(1) executable to bind arbitrary executables - to Linux virtual processor IDs and/or specific socket/core tuples. - -In more detail: - -1. The plpa-info(1) executable is a few simple calls into the PLPA - library that checks which API variant the system it is running on - has. If the kernel supports processor affinity and the PLPA is - able to figure out which API variant to use, it prints "Kernel - affinity support: no". Other responses indicate an error. The - "--topo" switch will print out basic topology information about - your system, if supported. - - Since the PLPA library abstracts this kind of problem away, this is - more a diagnostic tool than anything else. - - See "plpa-info --help" for more information. A man page does not - yet exist, unfortunately. - - Note that plpa-info is *only* compiled and installed if PLPA is - installed as a standalone package (see below). - -2. Developers can use this package by including the <plpa.h> header - file and using the following prototypes for setting and getting - processor affinity: - - int plpa_sched_setaffinity(pid_t pid, size_t cpusetsize, - const plpa_cpu_set_t *cpuset); - - int plpa_sched_getaffinity(pid_t pid, size_t cpusetsize, - const plpa_cpu_set_t *cpuset) - - These functions perform run-time tests to determine which back-end - API variant exists on the system and then dispatch to it correctly. - The units of cpusetsize is number of bytes. This should normally - just be sizeof(*cpuset), but is made available as a parameter to - allow for future expansion of the PLPA (stay tuned). - - The observant reader will notice that this is remarkably similar to - the one of the Linux API's (the function names are different and - the CPU set type is different). PLPA also provides several macros - for manipulating the plpa_cpu_set_t bitmask, quite similar to FDSET - macros (see "What, Exactly, Is the Problem?" above for a - description of problems with the native CPU_* macros): - - - PLPA_CPU_ZERO(&cpuset): Sets all bits in a plpa_cpu_set_t to - zero. - - PLPA_CPU_SET(num, &cpuset): Sets bit <num> of <cpuset> to one. - - PLPA_CPU_CLR(num, &cpuset): Sets bit <num> of <cpuset> to zero. - - PLPA_CPU_ISSET(num, &cpuset): Returns one if bit <num> of - <cpuset> is one; returns zero otherwise. - - Note that all four macros take a *pointer* to a plpa_cpu_set_t, as - denoted by "&cpuset" in the descriptions above. - - Also note that he PLPA distinguishes between Linux processor, - socket, and core IDs and processor, socket, and core numbers. The - *Linux IDs* are kernel-assigned integer values that do not - necessarily start with zero and are not necessarily contiguous. - The *numbers* start with 0 and are contiguous to (N-1). The - numbers are therefore mainly a human convenience; they may or may - not exactly correspond to the Linux IDs; it is safest to assume - that they do not. - - The following API functions are also available on supported - platforms with kernels that support topology information (e.g., - AMD/Intel platforms with Linux kernel v2.6.16 or later). The list - below is a summary only; see plpa.h for a specific list of function - signatures: - - - plpa_have_topology_information() - Will return 1 if the PLPA is able to provide topology - information, 0 otherwise. If 0 is returned, all the functions - below will return a negative value to signify a graceful failure. - - - plpa_map_to_processor_id() - Take a (socket ID, core ID) tuple and map it to a Linux processor - ID - - - plpa_map_to_socket_core() - Take a Linux processor ID and map it to a (socket ID, core ID) - tuple - - - plpa_get_processor_info() - Return the number of processors and the max Linux processor ID - - - plpa_get_processor_id() - Return the Linux processor ID for the Nth processor (starting - with 0) - - - plpa_get_processor_flags() - Return whether a Linux processor ID exists, and if so, if it is - online - - - plpa_get_socket_info() - Return the number of sockets and the max Linux socket ID - - - plpa_get_socket_id() - Return the Linux socket ID for the Nth socket (starting with 0) - - - plpa_get_core_info() - For a given socket ID, return the number of cores and the max - Linux core ID - - - plpa_get_core_id() - For a given socket ID, return the Linux core ID of the Nth core - (starting with 0) - - - plpa_get_core_flags() - Return whether a (socket ID,core ID) tuple exists, and if so, if - it is online - - - plpa_set_cache_behavior() - Tell PLPA to use (or not) a local cache for the topology - information, or to refresh the cache right now - - - plpa_finalize() - Release all internal resources allocated and maintained by the - PLPA. It is permissible to invoke other PLPA functions after - plpa_finalize(), but if you want to release PLPA's resources, you - will need to invoke plpa_finalize() again. Note that it is not - necessary (but harmless) to invoke plpa_finalize() on systems - where plpa_have_topology_information() returns that the topology - information is not supported. - - *** NOTE: Topology information (i.e., (socket ID, core ID) tuples) - may not be reported for offline processors. Hence, if any - processors are offline, the socket/core values returned by PLPA - will likely change once the processor is brought back online. - Sorry; this is how the Linux kernel works -- there's nothing - PLPA can do about it. - - The above functions are slightly more documented in plpa.h. - Contributions of real man pages would be greatly appreciated. - -3. The plpa-taskset(1) executable represents an evolution of the - venerable "taskset(1)" command. It allows binding of arbitrary - processes to specific Linux processor IDs and/or specific (socket - ID, core ID) tuples. It supports all the same command line syntax - of the taskset(1) command, but also supports additional syntax for - specifying socket and core IDs. Hence, you can launch - processor-bound jobs without needing to modify their source code to - call the PLPA library. See "plpa-taskset --help" for more - information on the command line options available, and brief - examples of usage. A man page does not yet exist, unfortunately. - -=========================================================================== - -How do I compile / install the PLPA as a standalone package? ------------------------------------------------------------- - -The PLPA uses the standard GNU Autoconf/Automake/Libtool toolset to -build and install itself. This means that generally, the following -works: - -shell$ ./configure --prefix=/where/you/want/to/install -[...lots of output...] -shell$ make all -[...lots of output...] -shell$ make install - -Depending on your --prefix, you may need to run the "make install" -step as root or some other privileged user. - -There are a few noteworthy configure options listed below. The -enable/disable options are shown in their non-default form. For -example, if --enable-foo is shown below, it is because --disable-foo -is the default. - ---enable-emulate: allow using PLPA on platforms that do not have - __NR_sched_setaffinity (e.g., OS X); usually only useful in - development / testing scenarios. - ---disable-executables: do not build the PLPA executables; only build - the library. - ---enable-included-mode: build PLPA in the "included" mode (see - below). - ---enable-debug: this option is probably only helpful for PLPA - developers. - ---with-plpa-symbol-prefix=STRING: a string prefix to add to all public - PLPA symbols. This is usually only useful in included mode (see - below). - ---with-valgrind(=DIR): require building PLPA with Valgrind support - (requires finding include/valgrind/memcheck.h). This will add a - small number of Valgrind annotations in the PLPA code base that - remove false/irrelevant Valgrind warnings. The =DIR clause is only - necessary if Valgrind's header files cannot be found by the - preprocessor's default search path. - -"make install" will install the following: - -- <plpa.h> in $includedir (typically $prefix/include) -- libplpa.la and libplpa.a and/or libplpa.so in $libdir (typically - $prefix/lib) -- plpa-info(1) executable in $bindir (typically $prefix/bin) -- plpa-taskset(1) executable in $bindir (typically $prefix/bin) - -Note that since PLPA builds itself with GNU Libtool, it can be built -as a static or shared library (or both). The default is to build a -shared library. You can enable building a static library by supplying -the "--enable-static" argument to configure; you can disable building -the shared library by supplying the "--disable-shared" argument to -configure. "make install" will install whichever library was built -(or both). - -"make uninstall" will fully uninstall PLPA from the prefix directory -(again, depending in filesystem permissions, you may need to run this -as root or some privileged user). - -=========================================================================== - -How do I include/embed PLPA in my software package? ---------------------------------------------------- - -It can be desirable to include PLPA in a larger software package -(be sure to check out the LICENSE file) so that users don't have to -separately download and install it before installing your software -(after all, PLPA is a tiny little project -- why make users bother -with it?). - -When used in "included" mode, PLPA will: - -- not install any header files -- not build or install any executables -- not build libplpa.* -- instead, it will build libplpa_included.* - -There are two ways to put PLPA into "included" mode. From the -configure command line: - -shell$ ./configure --enable-included-mode ... - -Or by directly integrating PLPA's m4 configure macro in your configure -script and invoking a specific macro to enable the included mode. - -Every project is different, and there are many different ways of -integrating PLPA into yours. What follows is *one* example of how to -do it. - -Copy the PLPA directory in your source tree and include the plpa.m4 -file in your configure script -- perhaps with the following line in -acinclude.m4 (assuming the use of Automake): - -m4_include(path/to/plpa.m4) - -The following macros can then be used from your configure script (only -PLPA_INIT *must* be invoked if using the m4 macros): - -- PLPA_STANDALONE - Force the building of PLPA in standalone mode. Overrides the - --enable-included-mode command line switch. - -- PLPA_INCLUDED - Force the building of PLPA in included mode. - -- PLPA_SET_SYMBOL_PREFIX(foo) - Tells the PLPA to prefix all types and public symbols with "foo" - instead of "plpa_". This is recommended behavior if you are - including PLPA in a larger project -- it is possible that your - software will be combined with other software that also includes - PLPA. If you both use different symbol prefixes, there will be no - type/symbol clashes, and everything will compile and link - successfully. If you both include PLPA and do not change the symbol - prefix, it is likely that you will get multiple symbol definitions - when linking if an external PLPA is linked against your library / - application. Note that the PLPA_CPU_*() macros are *NOT* prefixed - (because they are only used when compiling and therefore present no - link/run-time conflicts), but all other types, enum values, and - symbols are. Enum values are prefixed with an upper-case - translation if the prefix supplied. For example, - PLPA_SET_SYMBOL_PREFIX(foo_) will result in foo_init() and - FOO_PROBE_OK. Tip: It might be good to include "plpa" in the - prefix, just for clarity. - -- PLPA_DISABLE_EXECUTABLES - Provides the same result as the --disable-executables configure - flag, and is implicit in included mode. - -- PLPA_ENABLE_EXECUTABLES - Provides the same result as the --enable-executables configure flag. - If used in conjunction with PLPA_INCLUDED, it must be specified - *after* PLPA_INLCLUDED to have effect, as PLPA_INCLUDED *disables* - executables. - -- PLPA_INIT(config-prefix, action-upon-success, action-upon-failure) - Invoke the PLPA tests and setup the PLPA to build. A traversal of - "make" into the PLPA directory should build everything (it is safe - to list the PLPA directory in the SUBDIRS of a higher-level - Makefile.am, for example). ***PLPA_INIT must be invoked after the - STANDALONE, INCLUDED, SET_SYMBOL_PREFIX, DISABLE_EXECUTABLES, and - ENABLE_EXECUTABLES macros.*** The first argument is the prefix to - use for AC_OUTPUT files. Hence, if your embedded PLPA is located in - the source tree at contrib/plpa, you should pass [contrib/plpa] as - the first argument. - -- PLPA_DO_AM_CONDITIONALS - If you embed PLPA in a larger project and build it conditionally - (e.g., if PLPA_INIT is in a conditional), you must unconditionally - invoke PLPA_DO_AM_CONDITIONALS to avoid warnings from Automake (for - the cases where PLPA is not selected to be built). This macro is - necessary because PLPA uses some AM_CONDITIONALs to build itself; - AM_CONDITIONALs cannot be defined conditionally. It is safe (but - unnecessary) to call PLPA_DO_AM_CONDITIONALS even if PLPA_INIT is - invoked unconditionally. - -Here's an example of integrating with a larger project named sandbox: - ----------- -shell$ cd sandbox -shell$ cp -r /somewhere/else/plpa-<version> plpa -shell$ edit acinclude.m4 -...add the line "m4_include(plpa/config/plpa.m4)"... -shell$ edit Makefile.am -...add "plpa" to SUBDIRS... -...add "$(top_builddir)/plpa/src/libplpa/libplpa_included.la" to - my executable's LDADD line... -...add "-I$(top_builddir)/plpa/src/libplpa" to AM_CPPFLAGS -shell$ edit configure.ac -...add "PLPA_INCLUDED" line... -...add "PLPA_SET_SYMBOL_PREFIX(sandbox_plpa_)" line... -...add "PLPA_INIT([./plpa], [plpa_happy=yes], [plpa_happy=no])" line... -...add error checking for plpa_happy=no case... -shell$ edit src/my_program.c -...add #include <plpa.h>... -...add calls to sandbox_plpa_sched_setaffinity()... -shell$ aclocal -shell$ autoconf -shell$ libtoolize --automake -shell$ automake -a -shell$ ./configure -...lots of output... -shell$ make -...lots of output... ----------- - -=========================================================================== - -How can I tell if PLPA is working? ----------------------------------- - -Run plpa-info; if it says "Kernel affinity support: yes", then PLPA is -working properly. - -If you want to compile your own test program to verify it, try -compiling and running the following: - ---------------------------------------------------------------------------- -#include <stdio.h> -#include <plpa.h> - -int main(int argc, char* argv[]) { - plpa_api_type_t p; - if (0 == plpa_api_probe(&p) && PLPA_PROBE_OK == p) { - printf("All is good!\n"); - } else { - printf("Looks like PLPA is not working\n"); - } - return 0; -} ---------------------------------------------------------------------------- - -You may need to supply appropriate -I and -L arguments to the -compiler/linker, respectively, to tell it where to find the PLPA -header and library files. Also don't forget to supply -lplpa to link -in the PLPA library itself. For example, if you configured PLPA with: - -shell$ ./configure --prefix=$HOME/my-plpa-install - -Then you would compile the above program with: - -shell$ gcc my-plpa-test.c \ - -I$HOME/my-plpa-install/include \ - -L$HOME/my-plpa-install/lib -lplpa \ - -o my-plpa-test -shell$ ./my-plpa-test - -If it compiles, links, runs, and prints "All is good!", then all -should be well. - -=========================================================================== - -What license does PLPA use? ---------------------------- - -This package is distributed under the BSD license (see the LICENSE -file in the top-level directory of a PLPA distribution). The -copyrights of several institutions appear throughout the code base -because some of the code was directly derived from the Open MPI -project (http://www.open-mpi.org/), which is also distributed under -the BSD license. - -=========================================================================== - -How do I get involved in PLPA? ------------------------------- - -The PLPA continues to evolve, particularly as core counts increase and -internal host topology becomes more important. We want to hear your -opinions. - -The best way to report bugs, send comments, or ask questions is to -sign up on the user's mailing list: - - plpa-users@open-mpi.org - -Because of spam, only subscribers are allowed to post to this list -(ensure that you subscribe with and post from exactly the same e-mail -address -- joe@example.com is considered different than -joe@mycomputer.example.com!). Visit this page to subscribe to the -list: - - http://www.open-mpi.org/mailman/listinfo.cgi/plpa-users - -Thanks for your time. |