upgrade PLPA to 1.3.2

16 files changed, 0 insertions, 2879 deletions

diff --git a/plpa-1.1/AUTHORS b/plpa-1.1/AUTHORS
deleted file mode 100644
index 4be028b6..00000000
--- a/plpa-1.1/AUTHORS
+++ /dev/null
@@ -1,13 +0,0 @@
-PLPA Authors
-============
-
-The IDs in parenthesis are those used in Subversion commit notices.
-
-Current Authors
----------------
-
-Indiana University:
-- Jeff Squyres (jsquyres)
-
-Lawrence Berkeley National Lab:
-- Paul Hargrove (phargrov)
diff --git a/plpa-1.1/LICENSE b/plpa-1.1/LICENSE
deleted file mode 100644
index 9fbff8df..00000000
--- a/plpa-1.1/LICENSE
+++ /dev/null
@@ -1,57 +0,0 @@
-Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
-                        University Research and Technology
-                        Corporation.  All rights reserved.
-Copyright (c) 2004-2005 The Regents of the University of California.
-                        All rights reserved.
-Copyright (c) 2007      Cisco Systems, Inc.  All rights reserved.
-
-Portions copyright:
-
-Copyright (c) 2004-2005  The University of Tennessee and The University
-                         of Tennessee Research Foundation.  All rights
-                         reserved.
-Copyright (c) 2004-2005  High Performance Computing Center Stuttgart, 
-                         University of Stuttgart.  All rights reserved.
-Copyright (c) 2006, 2007 Advanced Micro Devices, Inc.
-                         All rights reserved.
-
-$COPYRIGHT$
-
-Additional copyrights may follow
-
-$HEADER$
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-- Redistributions of source code must retain the above copyright
-  notice, this list of conditions and the following disclaimer.
-
-- Redistributions in binary form must reproduce the above copyright
-  notice, this list of conditions and the following disclaimer listed
-  in this license in the documentation and/or other materials
-  provided with the distribution.
-
-- Neither the name of the copyright holders nor the names of its
-  contributors may be used to endorse or promote products derived from
-  this software without specific prior written permission.
-
-The copyright holders provide no reassurances that the source code
-provided does not infringe any patent, copyright, or any other
-intellectual property rights of third parties.  The copyright holders
-disclaim any liability to any recipient for claims brought against
-recipient by any third party for infringement of that parties
-intellectual property rights.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
diff --git a/plpa-1.1/Makefile.am b/plpa-1.1/Makefile.am
deleted file mode 100644
index 43f69a02..00000000
--- a/plpa-1.1/Makefile.am
+++ /dev/null
@@ -1,17 +0,0 @@
-#
-# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
-#                         University Research and Technology
-#                         Corporation.  All rights reserved.
-# Copyright (c) 2004-2005 The Regents of the University of California.
-#                         All rights reserved.
-# Copyright (c) 2008      Cisco Systems, Inc.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-SUBDIRS = src
-DIST_SUBDIRS = $(SUBDIRS)
-EXTRA_DIST = README VERSION LICENSE AUTHORS plpa.m4
diff --git a/plpa-1.1/Makefile.in b/plpa-1.1/Makefile.in
deleted file mode 100644
index a004a6a6..00000000
--- a/plpa-1.1/Makefile.in
+++ /dev/null
@@ -1,498 +0,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
-#                         University Research and Technology
-#                         Corporation.  All rights reserved.
-# Copyright (c) 2004-2005 The Regents of the University of California.
-#                         All rights reserved.
-# Copyright (c) 2008      Cisco Systems, Inc.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = plpa-1.1
-DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	AUTHORS
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/plpa-1.1/plpa.m4 $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h \
-	$(top_builddir)/plpa-1.1/src/plpa_config.h \
-	$(top_builddir)/plpa-1.1/src/plpa.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUBDIRS = src
-DIST_SUBDIRS = $(SUBDIRS)
-EXTRA_DIST = README VERSION LICENSE AUTHORS plpa.m4
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  plpa-1.1/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  plpa-1.1/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic clean-libtool \
-	ctags ctags-recursive distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/plpa-1.1/README b/plpa-1.1/README
deleted file mode 100644
index 4659e248..00000000
--- a/plpa-1.1/README
+++ /dev/null
@@ -1,29 +0,0 @@
-This is a stripped-down version of the PLPA 1.1 package, adapted to
-be embedded in the htop code base. For the full PLPA package, go to
-http://www.open-mpi.org/projects/plpa/. Copyright notice for PLPA
-follows below.
-
-  -- Hisham Muhammad, htop author. March 2008.
-
-===========================================================================
-
-This is the Portable Linux Processor Affinity (PLPA) package
-(pronounced "pli-pa").  It is intended for developers who wish to use
-Linux processor affinity via the sched_setaffinity() and
-sched_getaffinity() library calls, but don't want to wade through the
-morass of 3 different APIs that have been offered through the life of
-these calls in various Linux distributions and glibc versions.
-
-Copyright (c) 2004-2006 The Trustees of Indiana University and Indiana
-                        University Research and Technology
-                        Corporation.  All rights reserved.
-Copyright (c) 2004-2005 The Regents of the University of California.
-                        All rights reserved.
-Copyright (c) 2006-2008 Cisco Systems, Inc.  All rights reserved.
-$COPYRIGHT$
-
-See LICENSE file for a rollup of all copyright notices.
-
-$HEADER$
-
-===========================================================================
diff --git a/plpa-1.1/VERSION b/plpa-1.1/VERSION
deleted file mode 100644
index 4b49c930..00000000
--- a/plpa-1.1/VERSION
+++ /dev/null
@@ -1,36 +0,0 @@
-# This is the VERSION file for PLPA, describing the precise version of
-# PLPA in this distribution.  The various components of the version
-# number below are combined to form a single version number string.
-
-# major, minor, and release are generally combined in the form
-# <major>.<minor>.<release>.  If release is zero, then it is omitted.
-
-major=1
-minor=1
-release=0
-
-# greek is used for alpha or beta release tags.  If it is non-empty,
-# it will be appended to the version number.  It does not have to be
-# numeric.  Common examples include a1 (alpha release 1), b1 (beta
-# release 1), sc2005 (Super Computing 2005 release).  The only
-# requirement is that it must be entirely printable ASCII characters
-# and have no white space.
-
-greek=
-
-# If want_svn=1, then the SVN r number will be included in the overall
-# PLPA version number in some form.
-
-want_svn=0
-
-# If svn_r=-1, then the SVN r numbere will be obtained dynamically at
-# run time, either 1) via the "svnversion" command (if this is a
-# Subversion checkout) in the form "r<svn_r>", or b) with the date (if
-# this is not a Subversion checkout, and the svnversion command cannot
-# be used) in the form of "svn<date>".  Alternatively, if svn_r is not
-# -1, the value of svn_r will be directly appended to the version
-# string.  This happens during "make dist", for example: if the
-# distribution tarball is being made from an SVN checkout, the value
-# of svn_r in this file is replaced with the output of "svnversion".
-
-svn_r=r147:149
diff --git a/plpa-1.1/plpa.m4 b/plpa-1.1/plpa.m4
deleted file mode 100644
index 7931b79d..00000000
--- a/plpa-1.1/plpa.m4
+++ /dev/null
@@ -1,274 +0,0 @@
-# -*- shell-script -*-
-#
-# Copyright (c) 2004-2005 The Trustees of Indiana University and Indiana
-#                         University Research and Technology
-#                         Corporation.  All rights reserved.
-# Copyright (c) 2004-2005 The Regents of the University of California.
-#                         All rights reserved.
-# Copyright (c) 2006-2008 Cisco Systems, Inc.  All rights reserved.
-# $COPYRIGHT$
-# 
-# Additional copyrights may follow
-# 
-# $HEADER$
-#
-
-# Main PLPA m4 macro, to be invoked by the user
-#
-# Expects two paramters:
-# 1. What to do upon success
-# 2. What to do upon failure
-#
-AC_DEFUN([PLPA_INIT],[
-    AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-    AC_REQUIRE([AC_PROG_CC])
-
-    # Check for syscall()
-    AC_CHECK_FUNC([syscall], [happy=1], [happy=0])
-
-    # Look for syscall.h
-    if test "$happy" = 1; then
-        AC_CHECK_HEADER([sys/syscall.h], [happy=1], [happy=0])
-    fi
-
-    # Look for unistd.h
-    if test "$happy" = 1; then
-        AC_CHECK_HEADER([unistd.h], [happy=1], [happy=0])
-    fi
-
-    # Check for __NR_sched_setaffinity
-    if test "$happy" = 1; then
-        AC_MSG_CHECKING([for __NR_sched_setaffinity])
-        if test "$plpa_emulate" = "yes"; then
-            AC_MSG_RESULT([emulated])
-            AC_DEFINE([__NR_sched_setaffinity], [0], [Emulated value])
-        else
-            AC_TRY_COMPILE([#include <syscall.h>
-#include <unistd.h>], [#ifndef __NR_sched_setaffinity
-#error __NR_sched_setaffinity_not found!
-#endif
-int i = 1;],
-                           [AC_MSG_RESULT([yes])
-                            happy=1], 
-                           [AC_MSG_RESULT([no])
-                            happy=0])
-        fi
-    fi
-
-    # Check for __NR_sched_getaffinity (probably overkill, but what
-    # the heck?)
-    if test "$happy" = 1; then
-        AC_MSG_CHECKING([for __NR_sched_getaffinity])
-        if test "$plpa_emulate" = "yes"; then
-            AC_MSG_RESULT([emulated])
-            AC_DEFINE([__NR_sched_getaffinity], [0], [Emulated value])
-        else
-            AC_TRY_COMPILE([#include <syscall.h>
-#include <unistd.h>], [#ifndef __NR_sched_getaffinity
-#error __NR_sched_getaffinity_not found!
-#endif
-int i = 1;],
-                           [AC_MSG_RESULT([yes])
-                            happy=1], 
-                           [AC_MSG_RESULT([no])
-                            happy=0])
-        fi
-    fi
-
-    # If all was good, do the real init
-    AS_IF([test "$happy" = "1"],
-          [_PLPA_INIT($1, $2)],
-          [$2])
-    PLPA_DO_AM_CONDITIONALS
-
-    AC_CONFIG_FILES(
-        plpa_config_prefix[/Makefile]
-        plpa_config_prefix[/src/Makefile]
-    )
-
-    # Cleanup
-    unset happy
-])dnl
-
-#-----------------------------------------------------------------------
-
-# Build PLPA as a standalone package
-AC_DEFUN([PLPA_STANDALONE],[
-    m4_define([plpa_config_prefix],[.])
-    AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-    plpa_mode=standalone
-])dnl
-
-#-----------------------------------------------------------------------
-
-# Build PLPA as an included package
-AC_DEFUN([PLPA_INCLUDED],[
-    m4_define([plpa_config_prefix],[$1])
-    AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-    plpa_mode=included
-    PLPA_DISABLE_EXECUTABLES
-])dnl
-
-#-----------------------------------------------------------------------
-
-dnl JMS: No fortran bindings yet
-dnl # Set whether the fortran bindings will be built or not
-dnl AC_DEFUN([PLPA_FORTRAN],[
-dnl     AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-dnl 
-dnl    # Need [] around entire following line to escape m4 properly
-dnl     [plpa_tmp=`echo $1 | tr '[:upper:]' '[:lower:]'`]
-dnl     if test "$1" = "0" -o "$1" = "n"; then
-dnl         plpa_fortran=no
-dnl     elif test "$1" = "1" -o "$1" = "y"; then
-dnl         plpa_fortran=yes
-dnl     else
-dnl         AC_MSG_WARN([Did not understand PLPA_FORTRAN argument ($1) -- ignored])
-dnl     fi
-dnl ])dnl
-
-#-----------------------------------------------------------------------
-
-# Disable building the executables
-AC_DEFUN([PLPA_DISABLE_EXECUTABLES],[
-    AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-    plpa_executables=no
-])dnl
-
-#-----------------------------------------------------------------------
-
-# Specify the symbol prefix
-AC_DEFUN([PLPA_SET_SYMBOL_PREFIX],[
-    AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-    plpa_symbol_prefix_value=$1
-])dnl
-
-#-----------------------------------------------------------------------
-
-# Internals
-AC_DEFUN([_PLPA_INTERNAL_SETUP],[
-
-    AC_ARG_ENABLE([plpa_emulate],
-                    AC_HELP_STRING([--enable-plpa-emulate],
-                                   [Emulate __NR_sched_setaffinity and __NR_sched_getaffinity, to allow building on non-Linux systems (for testing)]))
-    if test "$enable_plpa_emulate" = "yes"; then
-        plpa_emulate=yes
-    else
-        plpa_emulate=no
-    fi
-
-dnl Hisham Muhammad: don't expose flags to htop's configure
-dnl 
-dnl     # Included mode, or standalone?
-dnl     AC_ARG_ENABLE([included-mode],
-dnl                     AC_HELP_STRING([--enable-included-mode],
-dnl                                    [Using --enable-included-mode puts the PLPA into "included" mode.  The default is --disable-included-mode, meaning that the PLPA is in "standalone" mode.]))
-dnl     if test "$enable_included_mode" = "yes"; then
-        plpa_mode=included
-dnl     else
-dnl         plpa_mode=standalone
-dnl     fi
-
-dnl JMS: No fortran bindings yet
-dnl    # Fortran bindings, or no?
-dnl    AC_ARG_ENABLE([fortran],
-dnl                    AC_HELP_STRING([--disable-fortran],
-dnl                                   [Using --disable-fortran disables building the Fortran PLPA API bindings]))
-dnl    if test "$enable_fortran" = "yes" -o "$enable_fortran" = ""; then
-dnl        plpa_fortran=yes
-dnl    else
-dnl        plpa_fortran=no
-dnl    fi
-
-dnl Hisham Muhammad: don't expose flags to htop's configure
-dnl 
-dnl     # Build and install the executables or no?
-dnl     AC_ARG_ENABLE([executables],
-dnl                     AC_HELP_STRING([--disable-executables],
-dnl                                    [Using --disable-executables disables building and installing the PLPA executables]))
-dnl     if test "$enable_executables" = "yes" -o "$enable_executables" = ""; then
-dnl         plpa_executables=yes
-dnl     else
-        plpa_executables=no
-dnl     fi
-
-dnl Hisham Muhammad: don't expose flags to htop's configure
-dnl 
-dnl     # Change the symbol prefix?
-dnl     AC_ARG_WITH([plpa-symbol-prefix],
-dnl                 AC_HELP_STRING([--with-plpa-symbol-prefix=STRING],
-dnl                                [STRING can be any valid C symbol name.  It will be prefixed to all public PLPA symbols.  Default: "plpa_"]))
-dnl     if test "$with_plpa_symbol_prefix" = ""; then
-        plpa_symbol_prefix_value=plpa_
-dnl     else
-dnl         plpa_symbol_prefix_value=$with_plpa_symbol_prefix
-dnl     fi
-
-])dnl
-
-#-----------------------------------------------------------------------
-
-# Internals for PLPA_INIT
-AC_DEFUN([_PLPA_INIT],[
-    AC_REQUIRE([_PLPA_INTERNAL_SETUP])
-
-    # Are we building as standalone or included?
-    AC_MSG_CHECKING([for PLPA building mode])
-    AC_MSG_RESULT([$plpa_mode])
-
-    # We need to set a path for header, etc files depending on whether
-    # we're standalone or included. this is taken care of by PLPA_INCLUDED.
-
-    AC_MSG_CHECKING([for PLPA config prefix])
-    AC_MSG_RESULT(plpa_config_prefix)
-
-    # Note that plpa_config.h *MUST* be listed first so that it
-    # becomes the "main" config header file.  Any AM_CONFIG_HEADERs
-    # after that (plpa.h) will only have selective #defines replaced,
-    # not the entire file.
-    AM_CONFIG_HEADER(plpa_config_prefix[/src/plpa_config.h])
-    AM_CONFIG_HEADER(plpa_config_prefix[/src/plpa.h])
-
-    # What prefix are we using?
-    AC_MSG_CHECKING([for PLPA symbol prefix])
-    AC_DEFINE_UNQUOTED(PLPA_SYM_PREFIX, [$plpa_symbol_prefix_value],
-                       [The PLPA symbol prefix])
-    # Ensure to [] escape the whole next line so that we can get the
-    # proper tr tokens
-    [plpa_symbol_prefix_value_caps="`echo $plpa_symbol_prefix_value | tr '[:lower:]' '[:upper:]'`"]
-    AC_DEFINE_UNQUOTED(PLPA_SYM_PREFIX_CAPS, [$plpa_symbol_prefix_value_caps],
-                       [The PLPA symbol prefix in all caps])
-    AC_MSG_RESULT([$plpa_symbol_prefix_value])
-
-dnl JMS: No fortran bindings yet
-dnl    # Check for fortran
-dnl    AC_MSG_CHECKING([whether to build PLPA Fortran API])
-dnl    AC_MSG_RESULT([$plpa_fortran])
-
-    # Check whether to build the exectuables or not
-    AC_MSG_CHECKING([whether to build PLPA executables])
-    AC_MSG_RESULT([$plpa_executables])
-
-    # If we're building executables, we need some things for plpa-taskset
-    if test "$plpa_executables" = "yes"; then
-        AC_C_INLINE