configfile="Config file"
usage="Usage: {0} [options]\n\nOptions:\n"
total="Total"


[help]
paths="Loadable colorschemes & layouts, and the config file, are searched for, in order:"
log="The log file is in {0}"
written="Config written to {0}"
help="""
Quit: q or <C-c>

Process navigation:
  - k and <Up>: up
  - j and <Down>: down
  - <C-u>: half page up
  - <C-d>: half page down
  - <C-b> and <PageUp>: full page up
  - <C-f> and <PageDown> : full page down
  - gg and <Home>: jump to top
  - G and <End>: jump to bottom

Process actions:
  - <Tab>: toggle process grouping
  - dd: kill selected process or group of processes with SIGTERM (15)
  - d3: kill selected process or group of processes with SIGQUIT (3)
  - d9: kill selected process or group of processes with SIGKILL (9)

Process sorting:
  - c: CPU
  - n: Cmd
  - m: Mem
  - p: PID

Process filtering:
  - /: start editing filter
  - (while editing):
    - <Enter>: accept filter
    - <C-c> and <Escape>: clear filter

CPU and Mem graph scaling:
  - h: scale in
  - l: scale out

Network:
  - b: toggle between mbps and scaled bytes per second
"""
# TRANSLATORS: Please don't translate the layout **names**
layouts = """Built-in layouts:
   default
   minimal
   battery
   kitchensink"""
# TRANSLATORS: Please don't translate the colorcheme **names**
colorschemes = """Built-in colorschemes:
   default
   default-dark (for white background)
   solarized
   solarized16-dark
   solarized16-light
   monokai
   vice
   nord"""
# TRANSLATORS: Please don't translate the widget **names**
widgets = """Widgets that can be used in layouts:
   cpu   - CPU load graph
   mem   - Physical & swap memory use graph
   temp  - Sensor temperatures
   disk  - Physical disk partition use
   power - A battery bar
   net   - Network load
   procs - Interactive process list"""


[args]
help="Show this screen."
color="Set a colorscheme."
scale="Graph scale factor, >0"
version="Print version and exit."
percpu="Show each CPU in the CPU widget."
no-percpu="Show aggregate CPU in the CPU widget."
cpuavg="Show average CPU in the CPU widget."
no-cpuavg="Disable show average CPU in the CPU widget."
temp="Show temperatures in fahrenheit."
tempc="Show temperatures in celsius."
statusbar="Show a statusbar with the time."
no-statusbar="Disable statusbar."
rate="Refresh frequency. Most time units accepted.  \"1m\" = refresh every minute.  \"100ms\" = refresh every 100ms."
layout="Name of layout spec file for the UI. Use \"-\" to pipe."
net="Select network interface. Several interfaces can be defined using comma separated values. Interfaces can also be ignored using \"!\""
export="Enable metrics for export on the specified port."
mbps="Show network rate as mbps."
bytes="Show network rate as bytes."
test="Runs tests and exits with success/failure code."
no-test="Disable tests."
conffile="Config file to use instead of default (MUST BE FIRST ARGUMENT)."
nvidia="Enable NVidia GPU metrics."
no-nvidia="Disable NVidia GPU metrics."
nvidiarefresh="Refresh frequency. Most time units accepted."
# TRANSLATORS: Please don't translate the **labels** ("devices", "layouts") as they don't change in the code.
list="""
List <devices|layouts|colorschemes|paths|keys|langs>
      devices: Prints out device names for filterable widgets
      layouts: Lists built-in layouts
      colorschemes: Lists built-in colorschemes
      paths: List out configuration file search paths
      widgets: Widgets that can be used in a layout
      keys: Show the keyboard bindings.
      langs: Show supported language translations."""
write="Write out a default config file."


[config.err]
configsyntax="0| bad config file syntax; should be KEY=VALUE, was {0}"
deprecation="1| line {0}: '{1}' is deprecated.  Ignored {1}={2}"
line="2| line #{0}: {1}"
tempscale="3| invalid TempScale value {0}"


[error]
configparse="4| failed to parse config file: {0}"
cliparse="5| parsing CLI args: {0}"
logsetup="6| failed to setup log file: {0}"
unknownopt="7| Unknown option \"{0}\"; try layouts, colorschemes, keys, paths, or devices\n"
writefail="8| Failed to write configuration file: {0}"
checklog="9| errors encountered; from {0}:"
metricsetup="10| error setting up {0} metrics: {1}"
nometrics="11| no metrics for {0} {1}"
fatalfetch="12| fatal error fetching {0} info: {1}"
recovfetch="13| recoverable error fetching {0} info; skipping {0}: {1}"
nodevfound="14| no usable {0} found"
setuperr="15| error setting up {0}: {1}"
colorschemefile="16| failed to find colorscheme file {0} in {1}"
colorschemeread="17| failed to read colorscheme file {0}: {1}"
colorschemeparse="18| failed to parse colorscheme file: {0}"
findlayout="19| failed to find layout file {0}: {1}"
logopen="20| failed to open log file {0}: {1}"
table="21| table widget TopRow value less than 0. TopRow: {0}"
nohostname="22| could not get hostname: {0}"

[layout.error]
widget="23| Invalid widget name {0}.  Must be one of {1}"
format="24| Layout error on line {0}: format must be {1}. Error parsing {2} as a int. Word was {3}. Using a row height of 1."
slashes="25| Layout warning on line {0}: too many '/' in word {1}; ignoring extra junk."

[widget.label]
disk=" Disk Usage "
cpu=" CPU Usage "
gauge=" Power Level "
battery=" Battery Status "
batt=" Battery "
temp=" Temperatures "
net=" Network Usage "
netint=" Network Usage: {0} "
mem=" Memory Usage "


[widget.net.err]
netactivity="26| failed to get network activity from gopsutil: {0}"
negvalrecv="27| error: negative value for recently received network data from gopsutil. recentBytesRecv: {0}"
negvalsent="28| error: negative value for recently sent network data from gopsutil. recentBytesSent: {0}"


[widget.disk]
disk="Disk"
mount="Mount"
used="Used"
free="Free"
rs="R/s"
ws="W/s"


[widget.proc]
filter=" Filter: "
label=" Processes "
[widget.proc.header]
count="Count"
command="Command"
cpu="CPU%"
mem="Mem%"
pid="PID"
[widget.proc.err]
count="29| failed to get CPU count from gopsutil: {0}"
retrieve="30| failed to retrieve processes: {0}"
ps="31| failed to execute 'ps' command: {0}"
gopsutil="32| failed to get processes from gopsutil: {0}"
pidconv="33| failed to convert PID to int: {0}. line: {1}"
cpuconv="34| failed to convert CPU usage to float: {0}. line: {1}"
memconv="35| failed to convert Mem usage to float: {0}. line: {1}"
getcmd="36| failed to get process command from gopsutil: {0}. psProc: {1}. i: {2}. pid: {3}"
cpupercent="37| failed to get process cpu usage from gopsutil: {0}. psProc: {1}. i: {2}. pid: {3}"
mempercent="38| failed to get process memory usage from gopsutil: {0}. psProc: {1}. i: {2}. pid: {3}"
parse="39| failed to parse output: {0}"