diff options
Diffstat (limited to 'doc/paper/IEEEtran.bst')
| -rw-r--r-- | doc/paper/IEEEtran.bst | 2417 |
1 files changed, 2417 insertions, 0 deletions
diff --git a/doc/paper/IEEEtran.bst b/doc/paper/IEEEtran.bst new file mode 100644 index 0000000..53fbc03 --- /dev/null +++ b/doc/paper/IEEEtran.bst @@ -0,0 +1,2417 @@ +%% +%% IEEEtran.bst +%% BibTeX Bibliography Style file for IEEE Journals and Conferences (unsorted) +%% Version 1.12 (2007/01/11) +%% +%% Copyright (c) 2003-2007 Michael Shell +%% +%% Original starting code base and algorithms obtained from the output of +%% Patrick W. Daly's makebst package as well as from prior versions of +%% IEEE BibTeX styles: +%% +%% 1. Howard Trickey and Oren Patashnik's ieeetr.bst (1985/1988) +%% 2. Silvano Balemi and Richard H. Roy's IEEEbib.bst (1993) +%% +%% Support sites: +%% http://www.michaelshell.org/tex/ieeetran/ +%% http://www.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ +%% and/or +%% http://www.ieee.org/ +%% +%% For use with BibTeX version 0.99a or later +%% +%% This is a numerical citation style. +%% +%%************************************************************************* +%% Legal Notice: +%% This code is offered as-is without any warranty either expressed or +%% implied; without even the implied warranty of MERCHANTABILITY or +%% FITNESS FOR A PARTICULAR PURPOSE! +%% User assumes all risk. +%% In no event shall IEEE or any contributor to this code be liable for +%% any damages or losses, including, but not limited to, incidental, +%% consequential, or any other damages, resulting from the use or misuse +%% of any information contained here. +%% +%% All comments are the opinions of their respective authors and are not +%% necessarily endorsed by the IEEE. +%% +%% This work is distributed under the LaTeX Project Public License (LPPL) +%% ( http://www.latex-project.org/ ) version 1.3, and may be freely used, +%% distributed and modified. A copy of the LPPL, version 1.3, is included +%% in the base LaTeX documentation of all distributions of LaTeX released +%% 2003/12/01 or later. +%% Retain all contribution notices and credits. +%% ** Modified files should be clearly indicated as such, including ** +%% ** renaming them and changing author support contact information. ** +%% +%% File list of work: IEEEabrv.bib, IEEEfull.bib, IEEEexample.bib, +%% IEEEtran.bst, IEEEtranS.bst, IEEEtranSA.bst, +%% IEEEtranN.bst, IEEEtranSN.bst, IEEEtran_bst_HOWTO.pdf +%%************************************************************************* +% +% +% Changelog: +% +% 1.00 (2002/08/13) Initial release +% +% 1.10 (2002/09/27) +% 1. Corrected minor bug for improperly formed warning message when a +% book was not given a title. Thanks to Ming Kin Lai for reporting this. +% 2. Added support for CTLname_format_string and CTLname_latex_cmd fields +% in the BST control entry type. +% +% 1.11 (2003/04/02) +% 1. Fixed bug with URLs containing underscores when using url.sty. Thanks +% to Ming Kin Lai for reporting this. +% +% 1.12 (2007/01/11) +% 1. Fixed bug with unwanted comma before "et al." when an entry contained +% more than two author names. Thanks to Pallav Gupta for reporting this. +% 2. Fixed bug with anomalous closing quote in tech reports that have a +% type, but without a number or address. Thanks to Mehrdad Mirreza for +% reporting this. +% 3. Use braces in \providecommand in begin.bib to better support +% latex2html. TeX style length assignments OK with recent versions +% of latex2html - 1.71 (2002/2/1) or later is strongly recommended. +% Use of the language field still causes trouble with latex2html. +% Thanks to Federico Beffa for reporting this. +% 4. Added IEEEtran.bst ID and version comment string to .bbl output. +% 5. Provide a \BIBdecl hook that allows the user to execute commands +% just prior to the first entry. +% 6. Use default urlstyle (is using url.sty) of "same" rather than rm to +% better work with a wider variety of bibliography styles. +% 7. Changed month abbreviations from Sept., July and June to Sep., Jul., +% and Jun., respectively, as IEEE now does. Thanks to Moritz Borgmann +% for reporting this. +% 8. Control entry types should not be considered when calculating longest +% label width. +% 9. Added alias www for electronic/online. +% 10. Added CTLname_url_prefix control entry type. + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% DEFAULTS FOR THE CONTROLS OF THE BST STYLE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +% These are the defaults for the user adjustable controls. The values used +% here can be overridden by the user via IEEEtranBSTCTL entry type. + +% NOTE: The recommended LaTeX command to invoke a control entry type is: +% +%\makeatletter +%\def\bstctlcite{\@ifnextchar[{\@bstctlcite}{\@bstctlcite[@auxout]}} +%\def\@bstctlcite[#1]#2{\@bsphack +% \@for\@citeb:=#2\do{% +% \edef\@citeb{\expandafter\@firstofone\@citeb}% +% \if@filesw\immediate\write\csname #1\endcsname{\string\citation{\@citeb}}\fi}% +% \@esphack} +%\makeatother +% +% It is called at the start of the document, before the first \cite, like: +% \bstctlcite{IEEEexample:BSTcontrol} +% +% IEEEtran.cls V1.6 and later does provide this command. + + + +% #0 turns off the display of the number for articles. +% #1 enables +FUNCTION {default.is.use.number.for.article} { #1 } + + +% #0 turns off the display of the paper and type fields in @inproceedings. +% #1 enables +FUNCTION {default.is.use.paper} { #1 } + + +% #0 turns off the forced use of "et al." +% #1 enables +FUNCTION {default.is.forced.et.al} { #0 } + +% The maximum number of names that can be present beyond which an "et al." +% usage is forced. Be sure that num.names.shown.with.forced.et.al (below) +% is not greater than this value! +% Note: There are many instances of references in IEEE journals which have +% a very large number of authors as well as instances in which "et al." is +% used profusely. +FUNCTION {default.max.num.names.before.forced.et.al} { #10 } + +% The number of names that will be shown with a forced "et al.". +% Must be less than or equal to max.num.names.before.forced.et.al +FUNCTION {default.num.names.shown.with.forced.et.al} { #1 } + + +% #0 turns off the alternate interword spacing for entries with URLs. +% #1 enables +FUNCTION {default.is.use.alt.interword.spacing} { #1 } + +% If alternate interword spacing for entries with URLs is enabled, this is +% the interword spacing stretch factor that will be used. For example, the +% default "4" here means that the interword spacing in entries with URLs can +% stretch to four times normal. Does not have to be an integer. Note that +% the value specified here can be overridden by the user in their LaTeX +% code via a command such as: +% "\providecommand\BIBentryALTinterwordstretchfactor{1.5}" in addition to +% that via the IEEEtranBSTCTL entry type. +FUNCTION {default.ALTinterwordstretchfactor} { "4" } + + +% #0 turns off the "dashification" of repeated (i.e., identical to those +% of the previous entry) names. IEEE normally does this. +% #1 enables +FUNCTION {default.is.dash.repeated.names} { #1 } + + +% The default name format control string. +FUNCTION {default.name.format.string}{ "{f.~}{vv~}{ll}{, jj}" } + + +% The default LaTeX font command for the names. +FUNCTION {default.name.latex.cmd}{ "" } + + +% The default URL prefix. +FUNCTION {default.name.url.prefix}{ "[Online]. Available:" } + + +% Other controls that cannot be accessed via IEEEtranBSTCTL entry type. + +% #0 turns off the terminal startup banner/completed message so as to +% operate more quietly. +% #1 enables +FUNCTION {is.print.banners.to.terminal} { #1 } + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% FILE VERSION AND BANNER %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION{bst.file.version} { "1.12" } +FUNCTION{bst.file.date} { "2007/01/11" } +FUNCTION{bst.file.website} { "http://www.michaelshell.org/tex/ieeetran/bibtex/" } + +FUNCTION {banner.message} +{ is.print.banners.to.terminal + { "-- IEEEtran.bst version" " " * bst.file.version * + " (" * bst.file.date * ") " * "by Michael Shell." * + top$ + "-- " bst.file.website * + top$ + "-- See the " quote$ * "IEEEtran_bst_HOWTO.pdf" * quote$ * " manual for usage information." * + top$ + } + { skip$ } + if$ +} + +FUNCTION {completed.message} +{ is.print.banners.to.terminal + { "" + top$ + "Done." + top$ + } + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING CONSTANTS %% +%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {bbl.and}{ "and" } +FUNCTION {bbl.etal}{ "et~al." } +FUNCTION {bbl.editors}{ "eds." } +FUNCTION {bbl.editor}{ "ed." } +FUNCTION {bbl.edition}{ "ed." } +FUNCTION {bbl.volume}{ "vol." } +FUNCTION {bbl.of}{ "of" } +FUNCTION {bbl.number}{ "no." } +FUNCTION {bbl.in}{ "in" } +FUNCTION {bbl.pages}{ "pp." } +FUNCTION {bbl.page}{ "p." } +FUNCTION {bbl.chapter}{ "ch." } +FUNCTION {bbl.paper}{ "paper" } +FUNCTION {bbl.part}{ "pt." } +FUNCTION {bbl.patent}{ "Patent" } +FUNCTION {bbl.patentUS}{ "U.S." } +FUNCTION {bbl.revision}{ "Rev." } +FUNCTION {bbl.series}{ "ser." } +FUNCTION {bbl.standard}{ "Std." } +FUNCTION {bbl.techrep}{ "Tech. Rep." } +FUNCTION {bbl.mthesis}{ "Master's thesis" } +FUNCTION {bbl.phdthesis}{ "Ph.D. dissertation" } +FUNCTION {bbl.st}{ "st" } +FUNCTION {bbl.nd}{ "nd" } +FUNCTION {bbl.rd}{ "rd" } +FUNCTION {bbl.th}{ "th" } + + +% This is the LaTeX spacer that is used when a larger than normal space +% is called for (such as just before the address:publisher). +FUNCTION {large.space} { "\hskip 1em plus 0.5em minus 0.4em\relax " } + +% The LaTeX code for dashes that are used to represent repeated names. +% Note: Some older IEEE journals used something like +% "\rule{0.275in}{0.5pt}\," which is fairly thick and runs right along +% the baseline. However, IEEE now uses a thinner, above baseline, +% six dash long sequence. +FUNCTION {repeated.name.dashes} { "------" } + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% PREDEFINED STRING MACROS %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +MACRO {jan} {"Jan."} +MACRO {feb} {"Feb."} +MACRO {mar} {"Mar."} +MACRO {apr} {"Apr."} +MACRO {may} {"May"} +MACRO {jun} {"Jun."} +MACRO {jul} {"Jul."} +MACRO {aug} {"Aug."} +MACRO {sep} {"Sep."} +MACRO {oct} {"Oct."} +MACRO {nov} {"Nov."} +MACRO {dec} {"Dec."} + + + +%%%%%%%%%%%%%%%%%% +%% ENTRY FIELDS %% +%%%%%%%%%%%%%%%%%% + +ENTRY + { address + assignee + author + booktitle + chapter + day + dayfiled + edition + editor + howpublished + institution + intype + journal + key + language + month + monthfiled + nationality + note + number + organization + pages + paper + publisher + school + series + revision + title + type + url + volume + year + yearfiled + CTLuse_article_number + CTLuse_paper + CTLuse_forced_etal + CTLmax_names_forced_etal + CTLnames_show_etal + CTLuse_alt_spacing + CTLalt_stretch_factor + CTLdash_repeated_names + CTLname_format_string + CTLname_latex_cmd + CTLname_url_prefix + } + {} + { label } + + + + +%%%%%%%%%%%%%%%%%%%%%%% +%% INTEGER VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%%% + +INTEGERS { prev.status.punct this.status.punct punct.std + punct.no punct.comma punct.period + prev.status.space this.status.space space.std + space.no space.normal space.large + prev.status.quote this.status.quote quote.std + quote.no quote.close + prev.status.nline this.status.nline nline.std + nline.no nline.newblock + status.cap cap.std + cap.no cap.yes} + +INTEGERS { longest.label.width multiresult nameptr namesleft number.label numnames } + +INTEGERS { is.use.number.for.article + is.use.paper + is.forced.et.al + max.num.names.before.forced.et.al + num.names.shown.with.forced.et.al + is.use.alt.interword.spacing + is.dash.repeated.names} + + +%%%%%%%%%%%%%%%%%%%%%% +%% STRING VARIABLES %% +%%%%%%%%%%%%%%%%%%%%%% + +STRINGS { bibinfo + longest.label + oldname + s + t + ALTinterwordstretchfactor + name.format.string + name.latex.cmd + name.url.prefix} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%% +%% LOW LEVEL FUNCTIONS %% +%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.controls} +{ default.is.use.number.for.article 'is.use.number.for.article := + default.is.use.paper 'is.use.paper := + default.is.forced.et.al 'is.forced.et.al := + default.max.num.names.before.forced.et.al 'max.num.names.before.forced.et.al := + default.num.names.shown.with.forced.et.al 'num.names.shown.with.forced.et.al := + default.is.use.alt.interword.spacing 'is.use.alt.interword.spacing := + default.is.dash.repeated.names 'is.dash.repeated.names := + default.ALTinterwordstretchfactor 'ALTinterwordstretchfactor := + default.name.format.string 'name.format.string := + default.name.latex.cmd 'name.latex.cmd := + default.name.url.prefix 'name.url.prefix := +} + + +% This IEEEtran.bst features a very powerful and flexible mechanism for +% controlling the capitalization, punctuation, spacing, quotation, and +% newlines of the formatted entry fields. (Note: IEEEtran.bst does not need +% or use the newline/newblock feature, but it has been implemented for +% possible future use.) The output states of IEEEtran.bst consist of +% multiple independent attributes and, as such, can be thought of as being +% vectors, rather than the simple scalar values ("before.all", +% "mid.sentence", etc.) used in most other .bst files. +% +% The more flexible and complex design used here was motivated in part by +% IEEE's rather unusual bibliography style. For example, IEEE ends the +% previous field item with a period and large space prior to the publisher +% address; the @electronic entry types use periods as inter-item punctuation +% rather than the commas used by the other entry types; and URLs are never +% followed by periods even though they are the last item in the entry. +% Although it is possible to accommodate these features with the conventional +% output state system, the seemingly endless exceptions make for convoluted, +% unreliable and difficult to maintain code. +% +% IEEEtran.bst's output state system can be easily understood via a simple +% illustration of two most recently formatted entry fields (on the stack): +% +% CURRENT_ITEM +% "PREVIOUS_ITEM +% +% which, in this example, is to eventually appear in the bibliography as: +% +% "PREVIOUS_ITEM," CURRENT_ITEM +% +% It is the job of the output routine to take the previous item off of the +% stack (while leaving the current item at the top of the stack), apply its +% trailing punctuation (including closing quote marks) and spacing, and then +% to write the result to BibTeX's output buffer: +% +% "PREVIOUS_ITEM," +% +% Punctuation (and spacing) between items is often determined by both of the +% items rather than just the first one. The presence of quotation marks +% further complicates the situation because, in standard English, trailing +% punctuation marks are supposed to be contained within the quotes. +% +% IEEEtran.bst maintains two output state (aka "status") vectors which +% correspond to the previous and current (aka "this") items. Each vector +% consists of several independent attributes which track punctuation, +% spacing, quotation, and newlines. Capitalization status is handled by a +% separate scalar because the format routines, not the output routine, +% handle capitalization and, therefore, there is no need to maintain the +% capitalization attribute for both the "previous" and "this" items. +% +% When a format routine adds a new item, it copies the current output status +% vector to the previous output status vector and (usually) resets the +% current (this) output status vector to a "standard status" vector. Using a +% "standard status" vector in this way allows us to redefine what we mean by +% "standard status" at the start of each entry handler and reuse the same +% format routines under the various inter-item separation schemes. For +% example, the standard status vector for the @book entry type may use +% commas for item separators, while the @electronic type may use periods, +% yet both entry handlers exploit many of the exact same format routines. +% +% Because format routines have write access to the output status vector of +% the previous item, they can override the punctuation choices of the +% previous format routine! Therefore, it becomes trivial to implement rules +% such as "Always use a period and a large space before the publisher." By +% pushing the generation of the closing quote mark to the output routine, we +% avoid all the problems caused by having to close a quote before having all +% the information required to determine what the punctuation should be. +% +% The IEEEtran.bst output state system can easily be expanded if needed. +% For instance, it is easy to add a "space.tie" attribute value if the +% bibliography rules mandate that two items have to be joined with an +% unbreakable space. + +FUNCTION {initialize.status.constants} +{ #0 'punct.no := + #1 'punct.comma := + #2 'punct.period := + #0 'space.no := + #1 'space.normal := + #2 'space.large := + #0 'quote.no := + #1 'quote.close := + #0 'cap.no := + #1 'cap.yes := + #0 'nline.no := + #1 'nline.newblock := +} + +FUNCTION {std.status.using.comma} +{ punct.comma 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.no 'cap.std := +} + +FUNCTION {std.status.using.period} +{ punct.period 'punct.std := + space.normal 'space.std := + quote.no 'quote.std := + nline.no 'nline.std := + cap.yes 'cap.std := +} + +FUNCTION {initialize.prev.this.status} +{ punct.no 'prev.status.punct := + space.no 'prev.status.space := + quote.no 'prev.status.quote := + nline.no 'prev.status.nline := + punct.no 'this.status.punct := + space.no 'this.status.space := + quote.no 'this.status.quote := + nline.no 'this.status.nline := + cap.yes 'status.cap := +} + +FUNCTION {this.status.std} +{ punct.std 'this.status.punct := + space.std 'this.status.space := + quote.std 'this.status.quote := + nline.std 'this.status.nline := +} + +FUNCTION {cap.status.std}{ cap.std 'status.cap := } + +FUNCTION {this.to.prev.status} +{ this.status.punct 'prev.status.punct := + this.status.space 'prev.status.space := + this.status.quote 'prev.status.quote := + this.status.nline 'prev.status.nline := +} + + +FUNCTION {not} +{ { #0 } + { #1 } + if$ +} + +FUNCTION {and} +{ { skip$ } + { pop$ #0 } + if$ +} + +FUNCTION {or} +{ { pop$ #1 } + { skip$ } + if$ +} + + +% convert the strings "yes" or "no" to #1 or #0 respectively +FUNCTION {yes.no.to.int} +{ "l" change.case$ duplicate$ + "yes" = + { pop$ #1 } + { duplicate$ "no" = + { pop$ #0 } + { "unknown boolean " quote$ * swap$ * quote$ * + " in " * cite$ * warning$ + #0 + } + if$ + } + if$ +} + + +% pushes true if the single char string on the stack is in the +% range of "0" to "9" +FUNCTION {is.num} +{ chr.to.int$ + duplicate$ "0" chr.to.int$ < not + swap$ "9" chr.to.int$ > not and +} + +% multiplies the integer on the stack by a factor of 10 +FUNCTION {bump.int.mag} +{ #0 'multiresult := + { duplicate$ #0 > } + { #1 - + multiresult #10 + + 'multiresult := + } + while$ +pop$ +multiresult +} + +% converts a single character string on the stack to an integer +FUNCTION {char.to.integer} +{ duplicate$ + is.num + { chr.to.int$ "0" chr.to.int$ - } + {"noninteger character " quote$ * swap$ * quote$ * + " in integer field of " * cite$ * warning$ + #0 + } + if$ +} + +% converts a string on the stack to an integer +FUNCTION {string.to.integer} +{ duplicate$ text.length$ 'namesleft := + #1 'nameptr := + #0 'numnames := + { nameptr namesleft > not } + { duplicate$ nameptr #1 substring$ + char.to.integer numnames bump.int.mag + + 'numnames := + nameptr #1 + + 'nameptr := + } + while$ +pop$ +numnames +} + + + + +% The output routines write out the *next* to the top (previous) item on the +% stack, adding punctuation and such as needed. Since IEEEtran.bst maintains +% the output status for the top two items on the stack, these output +% routines have to consider the previous output status (which corresponds to +% the item that is being output). Full independent control of punctuation, +% closing quote marks, spacing, and newblock is provided. +% +% "output.nonnull" does not check for the presence of a previous empty +% item. +% +% "output" does check for the presence of a previous empty item and will +% remove an empty item rather than outputing it. +% +% "output.warn" is like "output", but will issue a warning if it detects +% an empty item. + +FUNCTION {output.nonnull} +{ swap$ + prev.status.punct punct.comma = + { "," * } + { skip$ } + if$ + prev.status.punct punct.period = + { add.period$ } + { skip$ } + if$ + prev.status.quote quote.close = + { "''" * } + { skip$ } + if$ + prev.status.space space.normal = + { " " * } + { skip$ } + if$ + prev.status.space space.large = + { large.space * } + { skip$ } + if$ + write$ + prev.status.nline nline.newblock = + { newline$ "\newblock " write$ } + { skip$ } + if$ +} + +FUNCTION {output} +{ duplicate$ empty$ + 'pop$ + 'output.nonnull + if$ +} + +FUNCTION {output.warn} +{ 't := + duplicate$ empty$ + { pop$ "empty " t * " in " * cite$ * warning$ } + 'output.nonnull + if$ +} + +% "fin.entry" is the output routine that handles the last item of the entry +% (which will be on the top of the stack when "fin.entry" is called). + +FUNCTION {fin.entry} +{ this.status.punct punct.no = + { skip$ } + { add.period$ } + if$ + this.status.quote quote.close = + { "''" * } + { skip$ } + if$ +write$ +newline$ +} + + +FUNCTION {is.last.char.not.punct} +{ duplicate$ + "}" * add.period$ + #-1 #1 substring$ "." = +} + +FUNCTION {is.multiple.pages} +{ 't := + #0 'multiresult := + { multiresult not + t empty$ not + and + } + { t #1 #1 substring$ + duplicate$ "-" = + swap$ duplicate$ "," = + swap$ "+" = + or or + { #1 'multiresult := } + { t #2 global.max$ substring$ 't := } + if$ + } + while$ + multiresult +} + +FUNCTION {capitalize}{ "u" change.case$ "t" change.case$ } + +FUNCTION {emphasize} +{ duplicate$ empty$ + { pop$ "" } + { "\emph{" swap$ * "}" * } + if$ +} + +FUNCTION {do.name.latex.cmd} +{ name.latex.cmd + empty$ + { skip$ } + { name.latex.cmd "{" * swap$ * "}" * } + if$ +} + +% IEEEtran.bst uses its own \BIBforeignlanguage command which directly +% invokes the TeX hyphenation patterns without the need of the Babel +% package. Babel does a lot more than switch hyphenation patterns and +% its loading can cause unintended effects in many class files (such as +% IEEEtran.cls). +FUNCTION {select.language} +{ duplicate$ empty$ 'pop$ + { language empty$ 'skip$ + { "\BIBforeignlanguage{" language * "}{" * swap$ * "}" * } + if$ + } + if$ +} + +FUNCTION {tie.or.space.prefix} +{ duplicate$ text.length$ #3 < + { "~" } + { " " } + if$ + swap$ +} + +FUNCTION {get.bbl.editor} +{ editor num.names$ #1 > 'bbl.editors 'bbl.editor if$ } + +FUNCTION {space.word}{ " " swap$ * " " * } + + +% Field Conditioners, Converters, Checkers and External Interfaces + +FUNCTION {empty.field.to.null.string} +{ duplicate$ empty$ + { pop$ "" } + { skip$ } + if$ +} + +FUNCTION {either.or.check} +{ empty$ + { pop$ } + { "can't use both " swap$ * " fields in " * cite$ * warning$ } + if$ +} + +FUNCTION {empty.entry.warn} +{ author empty$ title empty$ howpublished empty$ + month empty$ year empty$ note empty$ url empty$ + and and and and and and + { "all relevant fields are empty in " cite$ * warning$ } + 'skip$ + if$ +} + + +% The bibinfo system provides a way for the electronic parsing/acquisition +% of a bibliography's contents as is done by ReVTeX. For example, a field +% could be entered into the bibliography as: +% \bibinfo{volume}{2} +% Only the "2" would show up in the document, but the LaTeX \bibinfo command +% could do additional things with the information. IEEEtran.bst does provide +% a \bibinfo command via "\providecommand{\bibinfo}[2]{#2}". However, it is +% currently not used as the bogus bibinfo functions defined here output the +% entry values directly without the \bibinfo wrapper. The bibinfo functions +% themselves (and the calls to them) are retained for possible future use. +% +% bibinfo.check avoids acting on missing fields while bibinfo.warn will +% issue a warning message if a missing field is detected. Prior to calling +% the bibinfo functions, the user should push the field value and then its +% name string, in that order. + +FUNCTION {bibinfo.check} +{ swap$ duplicate$ missing$ + { pop$ pop$ "" } + { duplicate$ empty$ + { swap$ pop$ } + { swap$ pop$ } + if$ + } + if$ +} + +FUNCTION {bibinfo.warn} +{ swap$ duplicate$ missing$ + { swap$ "missing " swap$ * " in " * cite$ * warning$ pop$ "" } + { duplicate$ empty$ + { swap$ "empty " swap$ * " in " * cite$ * warning$ } + { swap$ pop$ } + if$ + } + if$ +} + + +% IEEE separates large numbers with more than 4 digits into groups of +% three. IEEE uses a small space to separate these number groups. +% Typical applications include patent and page numbers. + +% number of consecutive digits required to trigger the group separation. +FUNCTION {large.number.trigger}{ #5 } + +% For numbers longer than the trigger, this is the blocksize of the groups. +% The blocksize must be less than the trigger threshold, and 2 * blocksize +% must be greater than the trigger threshold (can't do more than one +% separation on the initial trigger). +FUNCTION {large.number.blocksize}{ #3 } + +% What is actually inserted between the number groups. +FUNCTION {large.number.separator}{ "\," } + +% So as to save on integer variables by reusing existing ones, numnames +% holds the current number of consecutive digits read and nameptr holds +% the number that will trigger an inserted space. +FUNCTION {large.number.separate} +{ 't := + "" + #0 'numnames := + large.number.trigger 'nameptr := + { t empty$ not } + { t #-1 #1 substring$ is.num + { numnames #1 + 'numnames := } + { #0 'numnames := + large.number.trigger 'nameptr := + } + if$ + t #-1 #1 substring$ swap$ * + t #-2 global.max$ substring$ 't := + numnames nameptr = + { duplicate$ #1 nameptr large.number.blocksize - substring$ swap$ + nameptr large.number.blocksize - #1 + global.max$ substring$ + large.number.separator swap$ * * + nameptr large.number.blocksize - 'numnames := + large.number.blocksize #1 + 'nameptr := + } + { skip$ } + if$ + } + while$ +} + +% Converts all single dashes "-" to double dashes "--". +FUNCTION {n.dashify} +{ large.number.separate + 't := + "" + { t empty$ not } + { t #1 #1 substring$ "-" = + { t #1 #2 substring$ "--" = not + { "--" * + t #2 global.max$ substring$ 't := + } + { { t #1 #1 substring$ "-" = } + { "-" * + t #2 global.max$ substring$ 't := + } + while$ + } + if$ + } + { t #1 #1 substring$ * + t #2 global.max$ substring$ 't := + } + if$ + } + while$ +} + + +% This function detects entries with names that are identical to that of +% the previous entry and replaces the repeated names with dashes (if the +% "is.dash.repeated.names" user control is nonzero). +FUNCTION {name.or.dash} +{ 's := + oldname empty$ + { s 'oldname := s } + { s oldname = + { is.dash.repeated.names + { repeated.name.dashes } + { s 'oldname := s } + if$ + } + { s 'oldname := s } + if$ + } + if$ +} + +% Converts the number string on the top of the stack to +% "numerical ordinal form" (e.g., "7" to "7th"). There is +% no artificial limit to the upper bound of the numbers as the +% least significant digit always determines the ordinal form. +FUNCTION {num.to.ordinal} +{ duplicate$ #-1 #1 substring$ "1" = + { bbl.st * } + { duplicate$ #-1 #1 substring$ "2" = + { bbl.nd * } + { duplicate$ #-1 #1 substring$ "3" = + { bbl.rd * } + { bbl.th * } + if$ + } + if$ + } + if$ +} + +% If the string on the top of the stack begins with a number, +% (e.g., 11th) then replace the string with the leading number +% it contains. Otherwise retain the string as-is. s holds the +% extracted number, t holds the part of the string that remains +% to be scanned. +FUNCTION {extract.num} +{ duplicate$ 't := + "" 's := + { t empty$ not } + { t #1 #1 substring$ + t #2 global.max$ substring$ 't := + duplicate$ is.num + { s swap$ * 's := } + { pop$ "" 't := } + if$ + } + while$ + s empty$ + 'skip$ + { pop$ s } + if$ +} + +% Converts the word number string on the top of the stack to +% Arabic string form. Will be successful up to "tenth". +FUNCTION {word.to.num} +{ duplicate$ "l" change.case$ 's := + s "first" = + { pop$ "1" } + { skip$ } + if$ + s "second" = + { pop$ "2" } + { skip$ } + if$ + s "third" = + { pop$ "3" } + { skip$ } + if$ + s "fourth" = + { pop$ "4" } + { skip$ } + if$ + s "fifth" = + { pop$ "5" } + { skip$ } + if$ + s "sixth" = + { pop$ "6" } + { skip$ } + if$ + s "seventh" = + { pop$ "7" } + { skip$ } + if$ + s "eighth" = + { pop$ "8" } + { skip$ } + if$ + s "ninth" = + { pop$ "9" } + { skip$ } + if$ + s "tenth" = + { pop$ "10" } + { skip$ } + if$ +} + + +% Converts the string on the top of the stack to numerical +% ordinal (e.g., "11th") form. +FUNCTION {convert.edition} +{ duplicate$ empty$ 'skip$ + { duplicate$ #1 #1 substring$ is.num + { extract.num + num.to.ordinal + } + { word.to.num + duplicate$ #1 #1 substring$ is.num + { num.to.ordinal } + { "edition ordinal word " quote$ * edition * quote$ * + " may be too high (or improper) for conversion" * " in " * cite$ * warning$ + } + if$ + } + if$ + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% LATEX BIBLIOGRAPHY CODE %% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {start.entry} +{ newline$ + "\bibitem{" write$ + cite$ write$ + "}" write$ + newline$ + "" + initialize.prev.this.status +} + +% Here we write out all the LaTeX code that we will need. The most involved +% code sequences are those that control the alternate interword spacing and +% foreign language hyphenation patterns. The heavy use of \providecommand +% gives users a way to override the defaults. Special thanks to Javier Bezos, +% Johannes Braams, Robin Fairbairns, Heiko Oberdiek, Donald Arseneau and all +% the other gurus on comp.text.tex for their help and advice on the topic of +% \selectlanguage, Babel and BibTeX. +FUNCTION {begin.bib} +{ "% Generated by IEEEtran.bst, version: " bst.file.version * " (" * bst.file.date * ")" * + write$ newline$ + preamble$ empty$ 'skip$ + { preamble$ write$ newline$ } + if$ + "\begin{thebibliography}{" longest.label * "}" * + write$ newline$ + "\providecommand{\url}[1]{#1}" + write$ newline$ + "\csname url@samestyle\endcsname" + write$ newline$ + "\providecommand{\newblock}{\relax}" + write$ newline$ + "\providecommand{\bibinfo}[2]{#2}" + write$ newline$ + "\providecommand{\BIBentrySTDinterwordspacing}{\spaceskip=0pt\relax}" + write$ newline$ + "\providecommand{\BIBentryALTinterwordstretchfactor}{" + ALTinterwordstretchfactor * "}" * + write$ newline$ + "\providecommand{\BIBentryALTinterwordspacing}{\spaceskip=\fontdimen2\font plus " + write$ newline$ + "\BIBentryALTinterwordstretchfactor\fontdimen3\font minus \fontdimen4\font\relax}" + write$ newline$ + "\providecommand{\BIBforeignlanguage}[2]{{%" + write$ newline$ + "\expandafter\ifx\csname l@#1\endcsname\relax" + write$ newline$ + "\typeout{** WARNING: IEEEtran.bst: No hyphenation pattern has been}%" + write$ newline$ + "\typeout{** loaded for the language `#1'. Using the pattern for}%" + write$ newline$ + "\typeout{** the default language instead.}%" + write$ newline$ + "\else" + write$ newline$ + "\language=\csname l@#1\endcsname" + write$ newline$ + "\fi" + write$ newline$ + "#2}}" + write$ newline$ + "\providecommand{\BIBdecl}{\relax}" + write$ newline$ + "\BIBdecl" + write$ newline$ +} + +FUNCTION {end.bib} +{ newline$ "\end{thebibliography}" write$ newline$ } + +FUNCTION {if.url.alt.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentryALTinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + +FUNCTION {if.url.std.interword.spacing} +{ is.use.alt.interword.spacing + {url empty$ 'skip$ {"\BIBentrySTDinterwordspacing" write$ newline$} if$} + { skip$ } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%%%%% +%% LONGEST LABEL PASS %% +%%%%%%%%%%%%%%%%%%%%%%%% + +FUNCTION {initialize.longest.label} +{ "" 'longest.label := + #1 'number.label := + #0 'longest.label.width := +} + +FUNCTION {longest.label.pass} +{ type$ "ieeetranbstctl" = + { skip$ } + { number.label int.to.str$ 'label := + number.label #1 + 'number.label := + label width$ longest.label.width > + { label 'longest.label := + label width$ 'longest.label.width := + } + { skip$ } + if$ + } + if$ +} + + + + +%%%%%%%%%%%%%%%%%%%%% +%% FORMAT HANDLERS %% +%%%%%%%%%%%%%%%%%%%%% + +%% Lower Level Formats (used by |