# bottom ![ci](https://github.com/ClementTsang/bottom/workflows/ci/badge.svg) [![crates.io link](https://img.shields.io/crates/v/bottom.svg)](https://crates.io/crates/bottom) A cross-platform graphical process/system monitor with a customizable interface and a multitude of features. Supports Linux, macOS, and Windows. Inspired by both [gtop](https://github.com/aksakalli/gtop) and [gotop](https://github.com/cjbassi/gotop). ![Quick demo recording showing off searching, expanding, and process killing.](assets/demo.gif) _Theme based on [gruvbox](https://github.com/morhetz/gruvbox)_ (`--color gruvbox`). _Font is [IBM Plex Mono](https://www.ibm.com/plex/), terminal is [Kitty](https://sw.kovidgoyal.net/kitty/)._ **Note**: If you are reading this on the master branch, then it may refer to in-development or un-released features/changes. Please refer to [release branch](https://github.com/ClementTsang/bottom/tree/release/README.md) or [crates.io](https://crates.io/crates/bottom) for the most up-to-date _release_ documentation. ## Table of Contents - [Installation](#installation) - [Manually](#manually) - [Cargo](#cargo) - [AUR](#aur) - [Debian (and Debian-based)](#debian) - [Fedora/CentOS](#fedoracentos) - [Gentoo](#gentoo) - [Nix](#nix) - [Homebrew](#homebrew) - [Scoop](#scoop) - [Chocolatey](#chocolatey) - [winget](#winget) - [Auto-completion](#auto-completion) - [Usage](#usage) - [Flags](#flags) - [Keybindings](#keybindings) - [General](#general) - [Process bindings](#process-bindings) - [Process search bindings](#process-search-bindings) - [Process sort bindings](#process-sort-bindings) - [Battery bindings](#battery-bindings) - [Process searching keywords](#process-searching-keywords) - [Supported keywords](#supported-keywords) - [Supported comparison operators](#supported-comparison-operators) - [Supported logical operators](#supported-logical-operators) - [Supported units](#supported-units) - [Mousebindings](#mousebindings) - [General](#general-1) - [CPU bindings](#cpu-bindings) - [Features](#features) - [Processes](#processes) - [Process searching](#process-searching) - [Process sorting](#process-sorting) - [Tree mode](#tree-mode) - [Zoom](#zoom) - [Expanding](#expanding) - [Basic mode](#basic-mode) - [Config files](#config-files) - [Config flags](#config-flags) - [Theming](#theming) - [Layout](#layout) - [Disk and temperature filtering](#disk-and-temperature-filtering) - [Battery](#battery) - [Compatibility](#compatibility) - [FAQ](#faq) - [Contribution](#contribution) - [Contributors](#contributors) - [Thanks](#thanks) ## Installation Note that bottom is: - Built on the stable version of Rust - Officially tested and released for only `x86_64` (and `i686` for Windows) - Developed mainly for macOS, Windows, and Linux Anything outside of this (i.e: ARM builds, building on Nightly, building on another OS) is currently not guaranteed, even if it does happen to work. For example, ARM is compiled on the CI pipeline and release builds will be provided, but not all features may work (such as R/s and W/s for disks). ### Manually There are a few ways to go about doing this manually. If you do so, please build using the current stable release of Rust. For example: ```bash # If required, update Rust on the stable channel rustup update stable # Clone and install the newest master version all via Cargo cargo install --git https://github.com/ClementTsang/bottom # Clone from master and install manually git clone https://github.com/ClementTsang/bottom cd bottom cargo install --path . # Download from releases and install curl -LO https://github.com/ClementTsang/bottom/archive/0.5.6.tar.gz tar -xzvf 0.5.6.tar.gz cargo install --path . ``` Or, you can just download the binary from the [latest release](https://github.com/ClementTsang/bottom/releases/latest). ### Cargo ```bash # If required, update Rust on the stable channel rustup update stable cargo install bottom # OR, --locked may be required due to how cargo install works cargo install bottom --locked ``` ### AUR ```bash yay -S bottom # If you instead want a pre-built binary: yay -S bottom-bin ``` ### Debian A `.deb` file is provided on each [release](https://github.com/ClementTsang/bottom/releases/latest): ```bash curl -LO https://github.com/ClementTsang/bottom/releases/download/0.5.6/bottom_0.5.6_amd64.deb sudo dpkg -i bottom_0.5.6_amd64.deb ``` ### Fedora/CentOS Available in [COPR](https://copr.fedorainfracloud.org/coprs/atim/bottom/): ```bash sudo dnf copr enable atim/bottom -y sudo dnf install bottom ``` ### Gentoo Available in [dm9pZCAq overlay](https://github.com/gentoo-mirror/dm9pZCAq) ```bash sudo eselect repository enable dm9pZCAq sudo emerge --sync dm9pZCAq sudo emerge sys-process/bottom::dm9pZCAq ``` ### Nix ```bash nix-env -i bottom ``` ### Homebrew ```bash brew tap clementtsang/bottom brew install bottom # If you need to be more specific, use: brew install clementtsang/bottom/bottom ``` ### Scoop ```bash scoop install bottom ``` ### Chocolatey Choco package located [here](https://chocolatey.org/packages/bottom). Since you cannot upload a new package while a previous one is being validated, the newest version of a release may take a while to appear. ```bash choco install bottom # Version number may be required for newer releases, if available: choco install bottom --version=0.5.6 ``` ### winget You can find the packages [here](https://github.com/microsoft/winget-pkgs/tree/master/manifests/Clement/bottom). Since validation of the package takes time, it may take a while to become available after a release. ```bash winget install bottom ``` You can also manually do the same thing by going to the [latest release](https://github.com/ClementTsang/bottom/releases/latest) and installing via the `.msi` file. You can uninstall via Control Panel or Options in Windows. ### Auto-completion Shell completions are included in binary releases, and are generated in the same directory as the binary if bottom is manually built. - For bash, move `btm.bash` to `$XDG_CONFIG_HOME/bash_completion or /etc/bash_completion.d/`. - For fish, move `btm.fish` to `$HOME/.config/fish/completions/`. - For zsh, move `_btm` to one of your `$fpath` directories. - For PowerShell, add `. _btm.ps1` to your PowerShell [profile](). Some install scripts (i.e. AUR) will automatically do this for you. ## Usage Run using `btm`. ### Flags Use `btm --help` for more information. ``` --autohide_time Temporarily shows the time scale in graphs. -b, --basic Hides graphs and uses a more basic look. --battery Shows the battery widget. -S, --case_sensitive Enables case sensitivity by default. -c, --celsius Sets the temperature type to Celsius. --color Use a color scheme, use --help for supported values. -C, --config Sets the location of the config file. -u, --current_usage Sets process CPU% to be based on current CPU%. -t, --default_time_value Default time value for graphs in ms. --default_widget_count Sets the n'th selected widget type as the default. --default_widget_type Sets which widget type to use as the default widget. --disable_click Disables mouse clicks. -m, --dot_marker Uses a dot marker for graphs. -f, --fahrenheit Sets the temperature type to Fahrenheit. -g, --group Groups processes with the same name by default. -h, --help Prints help information. Use --help for more info. -a, --hide_avg_cpu Hides the average CPU usage. --hide_table_gap Hides the spacing between table headers and entries. --hide_time Completely hides the time scaling. -k, --kelvin Sets the temperature type to Kelvin. -l, --left_legend Puts the CPU chart legend to the left side. --mem_as_value Defaults to showing process memory usage by value. -r, --rate Sets a refresh rate in ms. -R, --regex Enables regex by default. -d, --time_delta The amount in ms changed upon zooming. -T, --tree Defaults to showing the process widget in tree mode. --use_old_network_legend DEPRECATED - uses the older network legend. -V, --version Prints version information. -W, --whole_word Enables whole-word matching by default. ``` ### Keybindings #### General | | | | ------------------------------------------- | ------------------------------------------------------------ | | `q`, `Ctrl-c` | Quit | | `Esc` | Close dialog windows, search, widgets, or exit expanded mode | | `Ctrl-r` | Reset display and any collected data | | `f` | Freeze/unfreeze updating with new data | | `Ctrl-Left`
`Shift-Left`
`H`
`A` | Move widget selection left | | `Ctrl-Right`
`Shift-Right`
`L`
`D` | Move widget selection right | | `Ctrl-Up`
`Shift-Up`
`K`
`W` | Move widget selection up | | `Ctrl-Down`
`Shift-Down`
`J`
`S` | Move widget selection down | | `Left`, `h` | Move left within widget | | `Down`, `j` | Move down within widget | | `Up`,`k` | Move up within widget | | `Right`, `l` | Move right within widget | | `?` | Open help menu | | `gg`, `Home` | Jump to the first entry | | `Shift-g`, `End` | Jump to the last entry | | `e` | Toggle expanding the currently selected widget | | `+` | Zoom in on chart (decrease time range) | | `-` | Zoom out on chart (increase time range) | | `=` | Reset zoom | #### Process bindings | | | | ------------- | ---------------------------------------------------------------- | | `dd` | Kill the selected process | | `c` | Sort by CPU usage, press again to reverse sorting order | | `m` | Sort by memory usage, press again to reverse sorting order | | `p` | Sort by PID name, press again to reverse sorting order | | `n` | Sort by process name, press again to reverse sorting order | | `Tab` | Group/un-group processes with the same name | | `Ctrl-f`, `/` | Open process search widget | | `P` | Toggle between showing the full command or just the process name | | `s, F6` | Open process sort widget | | `I` | Invert current sort | | `%` | Toggle between values and percentages for memory usage | | `t`, `F5` | Toggle tree mode | #### Process search bindings | | | | ------------- | -------------------------------------------- | | `Tab` | Toggle between searching by PID or name | | `Esc` | Close the search widget (retains the filter) | | `Ctrl-a` | Skip to the start of the search query | | `Ctrl-e` | Skip to the end of the search query | | `Ctrl-u` | Clear the current search query | | `Backspace` | Delete the character behind the cursor | | `Delete` | Delete the character at the cursor | | `Alt-c`, `F1` | Toggle matching case | | `Alt-w`, `F2` | Toggle matching the entire word | | `Alt-r`, `F3` | Toggle using regex | | `Left` | Move cursor left | | `Right` | Move cursor right | ### Process sort bindings | | | | -------------- | ------------------------------- | | `Down`, `j` | Scroll down in list | | `Up`, `k` | Scroll up in list | | `Mouse scroll` | Scroll through sort widget | | `Esc` | Close the sort widget | | `Enter` | Sort by current selected column | #### Battery bindings | | | | -------------- | -------------------------- | | `Left, Alt-h` | Go to the next battery | | `Right, Alt-l` | Go to the previous battery | #### Basic memory bindings | | | | --- | ------------------------------------------------------ | | `%` | Toggle between values and percentages for memory usage | ### Process searching keywords - None of the keywords are case sensitive. - Use brackets to logically group together parts of the search. - Furthermore, if you want to search a reserved keyword, surround the text in quotes - for example, `"or" or "(sd-pam)"` would be a valid search: ![quote searching](assets/quote_search.png) #### Supported search types | Keywords | Example | Description | | ------------------- | ------------------ | ------------------------------------------------------------------------------- | | | `btm` | Matches by process or command name; supports regex | | `pid` | `pid=1044` | Matches by PID; supports regex | | `cpu`, `cpu%` | `cpu > 0.5` | Matches the CPU column; supports comparison operators | | `memb` | `memb > 1000 b` | Matches the memory column in terms of bytes; supports comparison operators | | `mem`, `mem%` | `mem < 0.5` | Matches the memory column in terms of percent; supports comparison operators | | `read`, `r/s` | `read = 1 mb` | Matches the read/s column in terms of bytes; supports comparison operators | | `write`, `w/s` | `write >= 1 kb` | Matches the write/s column in terms of bytes; supports comparison operators | | `tread`, `t.read` | `tread <= 1024 gb` | Matches he total read column in terms of bytes; supports comparison operators | | `twrite`, `t.write` | `twrite > 1024 tb` | Matches the total write column in terms of bytes; supports comparison operators | | `state` | `state=running` | Matches by state; supports regex | #### Supported comparison operators | Keywords | Description | | -------- | -------------------------------------------------------------- | | `=` | Checks if the values are equal | | `>` | Checks if the left value is strictly greater than the right | | `<` | Checks if the left value is strictly less than the right | | `>=` | Checks if the left value is greater than or equal to the right | | `<=` | Checks if the left value is less than or equal to the right | #### Supported logical operators Note that the `and` operator takes precedence over the `or` operator. | Keywords | Usage | Description | | ------------------ | -------------------------------------------- | --------------------------------------------------- | | `and, &&, ` | ` and/&&/ ` | Requires both conditions to be true to match | | `or, \|\|` | ` or/\|\| ` | Requires at least one condition to be true to match | #### Supported units | Keywords | Description | | -------- | ----------- | | `B` | Bytes | | `KB` | Kilobytes | | `MB` | Megabytes | | `GB` | Gigabytes | | `TB` | Terabytes | | `KiB` | Kibibytes | | `MiB` | Mebibytes | | `GiB` | Gibibytes | | `TiB` | Tebibytes | #### Other syntax | Keywords | Usage | Description | | -------- | ---------------------------------------------------- | -------------------------- | | `()` | `( AND ) OR ` | Group together a condition | ### Mousebindings #### General | | | | ------ | ----------------------------------------------------------------------------------------------------- | | Scroll | Table: Scroll
Chart: Zooms in or out by scrolling up or down respectively | | Click | Selects the clicked widget, table entry, dialog option, or tab.
Can be disabled via options/flags. | #### CPU bindings | | | | ------ | --------------------------------------------------------------------- | | Scroll | Scrolling over an CPU core/average shows only that entry on the chart | #### Process bindings | | | | ----- | --------------------------------------------------------------------------------------------------- | | Click | If in tree mode and you click on a selected entry, it toggles whether the branch is expanded or not | ## Features As yet _another_ process/system visualization and management application, bottom supports the typical features: - CPU usage visualization, on an average and per-core basis - RAM and swap usage visualization - Network visualization for receiving and transmitting, on a log-graph scale - Display information about disk capacity and I/O per second - Display temperatures from sensors - Display information regarding processes, like CPU, memory, I/O usage, and process state - Process management (well, if process killing is all you need) It also aims to be: - Lightweight - Cross-platform - supports 64-bit Linux, Windows, and macOS In addition, bottom also currently has the following features: ### Processes #### Process searching On any process widget, hit `/` to bring up a search bar. If the layout has multiple process widgets, note this search is independent of other widgets. ![search bar image](assets/search_empty.png) By default, just typing in something will search by process name: ![a simple search](assets/simple_search.png) This simple search can be refined by matching by case, matching the entire word, or by using regex: ![a slightly better search](assets/regex_search.png) Now let's say you want to search for two things - luckily, we have the `AND` and `OR` logical operators: ![logical operator demo with just ors](assets/or_search.png) ![logical operator demo with ands and ors](assets/and_or_search.png) Furthermore, one is able to refine their searches by CPU usage, memory usage, PID, and more. For example: ![using cpu filter](assets/usage_search.png) You can see all available keywords and query options [here](#process-searching-keywords). #### Process sorting You can sort the processes list by any column you want by pressing `s` while on a process widget: ![sorting](assets/sort.png) #### Tree mode Use `t` or `F5` to toggle tree mode in a process widget. This is somewhat similar to htop's tree mode. ![Standard tree](assets/trees_1.png) Sorting works as well, but it is done per groups of siblings. For example, by CPU%: ![Standard tree](assets/trees_2.png) You can also still filter processes. Branches that entirely do not match the query are pruned out, but if a branch contains an element that does match the query, any non-matching elements will instead just be greyed out, so the tree structure is still maintained: ![Standard tree](assets/trees_3.png) ### Zoom Using the `+`/`-` keys or the scroll wheel will move the current time intervals of the currently selected widget, and `=` to reset the zoom levels to the default. Widgets can hold different time intervals independently. These time intervals can be adjusted using the `-t`/`--default_time_value` and `-d`/`--time_delta` options, or their corresponding config options. ### Expand Only care about one specific widget? You can go to that widget and hit `e` to make that widget expand and take up the entire drawing area. You can minimize this expanded widget with `Esc` or pressing `e` again. ### Basic mode Using the `-b` or `--basic_mode` (or their corresponding config options) will open bottom in basic mode. There are no charts or expanded mode when using this, and tables are condensed such that only one table is displayed at a time. ![basic mode image](assets/basic_mode.png) Note custom layouts are currently not available when this is used. ### Config files bottom supports reading from a config file to customize its behaviour and look. By default, bottom will look at (based on [dirs](https://github.com/dirs-dev/dirs-rs#features)): | OS | Location | | ----------------------------------------------------------------------- | -------- | | `~/.config/bottom/bottom.toml` or `$XDG_CONFIG_HOME/bottom/bottom.toml` | Linux | | `$HOME/Library/Application Support/bottom/bottom.toml` | macOS | | `C:\Users\\AppData\Roaming\bottom\bottom.toml` | Windows | Note that if a config file does not exist at either the default location or the passed in location via `-C` or `--config`, one is automatically created with no settings applied. #### Config flags The following options can be set under `[flags]` to achieve the same effect as passing in a flag on runtime. Note that if a flag is given, it will override the config file. These are the following supported flag config values, which correspond to the flag of the same name described in [Flags](#flags): | Field | Type | | ------------------------ | ------------------------------------------------------------------------------------- | | `hide_avg_cpu` | Boolean | | `dot_marker` | Boolean | | `left_legend` | Boolean | | `current_usage` | Boolean | | `group_processes` | Boolean | | `case_sensitive` | Boolean | | `whole_word` | Boolean | | `regex` | Boolean | | `show_disabled_data` | Boolean | | `basic` | Boolean | | `hide_table_count` | Boolean | | `use_old_network_legend` | Boolean | | `battery` | Boolean | | `rate` | Unsigned Int (represents milliseconds) | | `default_time_value` | Unsigned Int (represents milliseconds) | | `time_delta` | Unsigned Int (represents milliseconds) | | `temperature_type` | String (one of ["k", "f", "c", "kelvin", "fahrenheit", "celsius"]) | | `default_widget_type` | String (one of ["cpu", "proc", "net", "temp", "mem", "disk"], same as layout options) | | `default_widget_count` | Unsigned Int (represents which `default_widget_type`) | | `disable_click` | Boolean | | `color` | String (one of ["default", "default-light", "gruvbox", "gruvbox-light"]) | | `mem_as_value` | Boolean | | `tree` | Boolean | #### Theming The config file can be used to set custom colours for parts of the application under the `[colors]` object. The following labels are customizable with strings that are hex colours, RGB colours, or specific named colours. Supported named colours are one of the following strings: `Reset, Black, Red, Green, Yellow, Blue, Magenta, Cyan, Gray, DarkGray, LightRed, LightGreen, LightYellow, LightBlue, LightMagenta, LightCyan, White`. | Labels | Details | Example | | ------------------------------- | ------------------------------------------------------- | ------------------------------------------------------- | | Table header colours | Colour of table headers | `table_header_color="255, 255, 255"` | | CPU colour per core | Colour of each core. Read in order. | `cpu_core_colors=["#ffffff", "white", "255, 255, 255"]` | | Average CPU colour | The average CPU color | `avg_cpu_color="White"` | | All CPUs colour | The colour for the "All" CPU label | `all_cpu_color="White"` | | RAM | The colour RAM will use | `ram_color="#ffffff"` | | SWAP | The colour SWAP will use | `swap_color="#ffffff"` | | RX | The colour rx will use | `rx_color="#ffffff"` | | TX | The colour tx will use | `tx_color="#ffffff"` | | Widget title colour | The colour of the label each widget has | `widget_title_color="#ffffff"` | | Border colour | The colour of the border of unselected widgets | `border_color="#ffffff"` | | Selected border colour | The colour of the border of selected widgets | `highlighted_border_color="#ffffff"` | | Text colour | The colour of most text | `text_color="#ffffff"` | | Graph colour | The colour of the lines and text of the graph | `graph_color="#ffffff"` | | Cursor colour | The cursor's colour | `cursor_color="#ffffff"` | | Selected text colour | The colour of text that is selected | `scroll_entry_text_color="#ffffff"` | | Selected text background colour | The background colour of text that is selected | `scroll_entry_bg_color="#ffffff"` | | High battery level colour | The colour used for a high battery level (100% to 50%) | `high_battery_color="green"` | | Medium battery level colour | The colour used for a medium battery level (50% to 10%) | `medium_battery_color="yellow"` | | Low battery level colour | The colour used for a low battery level (10% to 0%) | `low_battery_color="red"` | #### Layout bottom supports customizable layouts via the config file. Currently, layouts are controlled by using TOML objects and arrays. For example, given the sample layout: ```toml [[row]] [[row.child]] type="cpu" [[row]] ratio=2 [[row.child]] ratio=4 type="mem" [[row.child]] ratio=3 [[row.child.child]] type="temp" [[row.child.child]] type="disk" ``` This would give a layout that has two rows, with a 1:2 ratio. The first row has only the CPU widget. The second row is split into two columns with a 4:3 ratio. The first column contains the memory widget. The second column is split into two rows with a 1:1 ratio. The first is the temperature widget, the second is the disk widget. This is what the layout would look like when run: ![Sample layout](assets/sample_layout.png) Each `[[row]]` represents a _row_ in the layout. A row can have any number of `child` values. Each `[[row.child]]` represents either a _column or a widget_. A column can have any number of `child` values as well. Each `[[row.child.child]]` represents a _widget_. A widget is represented by having a `type` field set to a string. The following `type` values are supported: | | | | -------------------------------- | ------------------------ | | `"cpu"` | CPU chart and legend | | `"mem", "memory"` | Memory chart | | `"net", "network"` | Network chart and legend | | `"proc", "process", "processes"` | Process table and search | | `"temp", "temperature"` | Temperature table | | `"disk"` | Disk table | | `"empty"` | An empty space | | `"batt", "battery"` | Battery statistics | Each component of the layout accepts a `ratio` value. If this is not set, it defaults to 1. For an example, look at the [default config](./sample_configs/default_config.toml), which contains the default layout. Furthermore, you can have duplicate widgets. This means you could do something like: ```toml [[row]] ratio=1 [[row.child]] type="cpu" [[row.child]] type="cpu" [[row.child]] type="cpu" [[row]] ratio=1 [[row.child]] type="cpu" [[row.child]] type="empty" [[row.child]] type="cpu" [[row]] ratio=1 [[row.child]] type="cpu" [[row.child]] type="cpu" [[row.child]] type="cpu" ``` and get the following CPU donut: ![CPU donut](./assets/cpu_layout.png) #### Disk and temperature filtering You can hide specific disks and temperature sensors by name in the config file via `disk_filter` and `temp_filter` respectively. Regex (`regex = true`) and case-sensitivity (`case_sensitive = true`) are supported, but are off by default. For example, let's say , given this disk list: ![Disk filter not ignoring list](./assets/disk_filter_pre.png) I wish to _only_ show disks that follow the form `/dev/sda\d+`, or `/dev/nvme0n1p2`: ```toml [disk_filter] is_list_ignored = false list = ["/dev/sda\\d+", "/dev/nvme0n1p2"] regex = true ``` ![Disk filter not ignoring list](./assets/disk_filter_post.png) This would ignore anything that does not match either of these two conditions. If I instead wish to ignore anything that matches this list, then I can set `is_list_ignored = true` instead: ![Disk filter ignoring list](./assets/disk_filter_post2.png) Likewise, I can do something similar for `temp_filter`: ![Temp filter before](./assets/temp_filter_pre.png) If I, say, only wanted to see any entry with the words "cpu" or "wifi" in it, case sensitive: ```toml [temp_filter] is_list_ignored = false list = ["cpu", "wifi"] case_sensitive = true ``` ![Temp filter after](./assets/temp_filter_post.png) Now, flipping to `case_sensitive = false` would instead show: ![Temp filter after with case sensitivity off](./assets/temp_filter_post2.png) ### Battery You can get battery statistics (charge, time to fill/discharge, consumption in watts, and battery health) via the battery widget. Since this is only useful for devices like laptops, it is off by default. You can either enable the widget in the default layout via the `--battery` flag, or by specifying the widget in a [layout](#layout): ![Battery example](assets/battery.png) ### Compatibility The current compatibility of widgets with operating systems from personal testing: | OS | CPU | Memory | Disks | Temperature | Processes/Search | Networks | Battery | | ------- | --- | ------ | ----- | ----------- | ---------------- | -------- | -------------------------------------------- | | Linux | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | | Windows | ✓ | ✓ | ✓ | ✗ | ✓ | ✓ | ✓ (seems to have issues with dual batteries) | | macOS | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ## FAQ Please see the [FAQ](./FAQ.md) for answers to frequently asked questions. ## Contribution Contribution is always welcome! Please take a look at [CONTRIBUTING.md](./CONTRIBUTING.md) for details on how to help. ### Contributors Thanks to all contributors ([emoji key](https://allcontributors.org/docs/en/emoji-key)):

Marcin Wojnarowski
💻 📦
Mahmoud Al-Qudsi
💻
Andy
💻
Kim Brose
💻
Sven-Hendrik Haase
📖
Artem Polishchuk
📦 📖
Trung Lê
📦 🚇

dm9pZCAq
📦 📖
## Thanks - This project is very much inspired by [gotop](https://github.com/cjbassi/gotop), its successor [ytop](https://github.com/cjbassi/ytop), and [gtop](https://github.com/aksakalli/gtop). - Basic mode is heavily inspired by [htop's](https://hisham.hm/htop/) design. - This application was written with many, _many_ libraries, and built on the work of many talented people. This application would be impossible without their work. I used to thank them all individually but the list got too large... - And of course, thanks to all contributors!