Age | Commit message (Collapse) | Author |
|
This resolves issues with copy-pasting tabs by including them in the
pasted string.
Selection of tabs is still inconsistent with what might be expected
based on other terminal emulators, however the behavior hasn't
regressed.
This fixes https://github.com/jwilm/alacritty/issues/219.
|
|
This fixes #1674.
|
|
|
|
|
|
filetime v0.2.3 fails to build on OpenBSD.
This fixes #1784 .
|
|
To make sure that all error and information reporting to the user is
unified, all instances of `print!`, `eprint!`, `println!` and
`eprintln!` have been removed and replaced by logging.
When `RUST_LOG` is not specified, the default Alacritty logger now also
prints to both the stderr and a log file. The log file is only created
when a message is written to it and its name is printed to stdout the
first time it is used.
Whenever a warning or an error has been written to the log file/stderr,
a message is now displayed in Alacritty which points to the log file
where the full error is documented.
The message is cleared whenever the screen is cleared using either the
`clear` command or the `Ctrl+L` key binding.
To make sure that log files created by root don't prevent normal users
from interacting with them, the Alacritty log file is `/tmp/Alacritty-$PID.log`.
Since it's still possible that the log file can't be created, the UI
error/warning message now informs the user if the message was only
written to stderr. The reason why it couldn't be created is then printed
to stderr.
To make sure the deletion of the log file at runtime doesn't create any
issues, the file is re-created if a write is attempted without the file
being present.
To help with debugging Alacritty issues, a timestamp and the error
level are printed in all log messages.
All log messages now follow this format:
[YYYY-MM-DD HH:MM] [LEVEL] Message
Since it's not unusual to spawn a lot of different terminal emulators
without restarting, Alacritty can create a ton of different log files.
To combat this problem, logfiles are removed by default after
Alacritty has been closed. If the user wants to persist the log of a
single session, the `--persistent_logging` option can be used. For
persisting all log files, the `persistent_logging` option can be set in
the configuration file
|
|
This applies all breaking and non-breaking dependency updates.
|
|
|
|
The extra window padding was calculated in the renderer which lead to
problems with the paddings calculated in the `src/display.rs` and
`src/term/mod.rs`.
As a solution, every instance of `config.padding().x/y` has been removed
from the renderer (`src/renderer/mod.rs`), instead the padding is always
passed through from the `src/display.rs`.
The initial calculations during display creation and after resize then
are scaled appropriately and then the extra padding is calculated. As a
result every other location can just make use of the correctly
calculated `size_info.padding_x` and `size_info.padding_y`.
The documentation has been changed to clearly state that the padding is
scaled by DPI now.
This fixes #1773.
|
|
Currently alacritty always puts the grid at the top-left position of the
window. The only distance to the top-left window border is set by the
padding in the config.
However the grid always has a fixed size, and if a cell doesn't
completely fit the screen anymore, the padding at the bottom right
window corner can be significantly bigger than the padding at the top
left.
To fix this whenever there is more space left and there would usually be
a bigger padding at the bottom right, the space is now split up and
added to the padding.
This should always center the grid inside the window and make sure all
borders have the same padding from the text area.
This screenshot shows how it has been until now:
![Before](https://u.teknik.io/kRJwg.png)
Here is how it looks now:
![After](https://u.teknik.io/m4puV.png)
This fixes #1065.
|
|
Some changes include:
• Use the with_hardware_acceleration function on the ContextBuilder to not require the discrete GPU
• Remove the LMenu and RMenu virtual key codes (winit 0.16.0 removed these because Windows now generates LAlt and RAlt instead
• Replace set_cursor_state with hide_cursor (winit 0.16.0 removed the set_cursor_state function)
• Replace GlWindow::hidpi_factor with GlWindow::get_hidpi_factor and change to expecting an f64
• Use the glutin/winit dpi size and position types where possible
Glutin's dpi change event has been implemented. All size events now
return logical sizes. As a result of that, the logical sizes are translated
in the `display::handle_rezize` method so DPI scaling works correctly.
When the DPI is changed, the glyph cache is updated to make use of the
correct font size again.
Moving a window to a different screen which is a different DPI caused a
racing condition where the logical size of the event was sent to the
`handle_resize` method in `src/display.rs`, however if there was a DPI
change event before `handle_resize` is able to process this message, it
would incorrectly use the new DPI to scale the resize event.
To solve this issue instead of sending the logical size to the
`handle_resize` method and then converting it to a physical size in
there, the `LogicalSize` of the resize event is transformed into a
`PhysicalSize` as soon as it's received. This fixes potential racing
conditions since all events are processed in order.
The padding has been changed so it's also scaled by DPR.
The `scale_with_dpi` config option has been removed. If it's not present
a warning will be emitted.
The `winit` dependency on Windows has been removed. All interactions
with winit in Alacritty are handled through glutin.
|
|
This fixes jwilm/alacritty#1730.
|
|
|
|
This adds the option to automatically launch URLs with a specified
program when clicking on them.
The config option `mouse.url_launcher` has been added to specify which
program should be used to open the URL. The URL is always passed as the
last parameter to the specified command.
It is not always desired for URLs to open automatically when clicking on
them. To resolve this a new `modifiers` field has been introduced to the
config, which allows specifying which keyboard modifiers need to be held
down to launch URLs in the specified launcher.
Some tests have been added to make sure that the edge-cases of the URL
parsing are protected against future regressions. To make testing easier
the parsing method has been moved into the `SemanticSearch` trait. The
name of the trait has also been changed to just `Search` and it has been
moved to `src/term/mod.rs` to fit the additional functionality.
This fixes #113.
|
|
Initial support for Windows is implemented using the winpty translation
layer. Clipboard support for Windows is provided through the `clipboard`
crate, and font rasterization is provided by RustType.
The tty.rs file has been split into OS-specific files to separate
standard pty handling from the winpty implementation.
Several binary components are fetched via build script on windows
including libclang and winpty. These could be integrated more directly
in the future either by building those dependencies as part of the
Alacritty build process or by leveraging git lfs to store the artifacts.
Fixes #28.
|
|
|
|
The patch uses the Cargo.toml patch section to force a single downstream
choice of freetype-sys instead of relying on forks of other crates. It
also bumps the fontconfig/freetype dependencies in the process.
|
|
This replaces the current definitions, which depend on the system's
'xterm-256color' terminfo definition with the `alacritty` and
`alacritty-direct` definitions.
The new definitions are completely standalone.
The default `TERM` value has been changed to be dynamically
set based on the definitions installed on the system. Alacritty will
try to use the `alacritty` definition first and fall back to
`xterm-256color` if the `alacritty` definition is not present.
|
|
The core-* dependencies have been updated and every breaking
change has been resolved.
These are the main changes which required adaption:
- font_path() returns a PathBuf now
- get_descriptors() returns an Option<CFArray>
- get_advances_for_glyphs and get_glyphs_for_characters are now unsafe.
All packages which did not have breaking updates have also been updated.
|
|
* Change deb installation from crates.io to git
There have been a number of issues an PRs opened since
the cargo-deb installation does not work with the latest
version from crates.io.
To help out users until the crates.io version is updated,
the installation instructions have been temporarily
changed to install `cargo-deb` through github.
* Revert cargo-deb install back to use crates.io
Since `cargo-deb` has been updated on crates.io it is now
possible to just install it from crates.io and build Alacritty's
deb without having to rely on github.
* Update dependencies
This fixes an `illegal hardware instruction (core dumped)`
error when building in release mode.
* Remove redundant copy when selecting font_key
* Bump version number to 0.2.0
Since the Scrollback branch introduces some major changes, this bumps
the version number from 0.1.0 to 0.2.0.
The versions of Alacritty have not been updated regularly to this point,
so the scrollback branch is a good point in time to start updating
Alacritty's version on a regular basis.
Further changes to the readme, like dropping the 'alpha' status and
updating it to 'beta' could also be introduced with this branch. This
way there will be a clean cut which updates everything as soon as
scrollback is merged.
Building versions is another thing which would be a good thing to start
reasonably quickly. However starting this on the main branch after
scrollback has been merged seems like a more reliable way to move
forward.
This fixes #1240.
* Add a CHANGELOG file
A CHANGELOG file has been added to offer a bit more transparency over
which features have been changed, added and potentially removed in
Alacritty.
There are various formats available for the CHANGELOG file but the most
common and sensible one seems to be the one defined by
https://keepachangelog.com/en/1.0.0. Following the template proposed by
this it should be possible to create a clear CHANGELOG which makes it
simple for new contributors to figure out exactly which formatting
should be used for it.
Since there have been quite a few changes to Alacritty already, not all
changes have been added to the changelog. However a few entries have
been ported just to give a bit of an example what the format should look
like. This also helps with the 0.2.0 version since it will not be
completely empty in the changelog.
This fixes #1534.
* Update CHANGELOG
This updates the CHANGELOG to include the changes introduced by
43882ade33d4c14ee7248e489a2d33395faaa0b1.
|
|
This fixes an `illegal hardware instruction (core dumped)`
error when building in release mode.
|
|
* Allow disabling DPI scaling
This makes it possible to disable DPI scaling completely, instead the
the display pixel ration will always be fixed to 1.0.
By default nothing has changed and DPI is still enabled, this just seems
like a better way than running `WINIT_HIDPI_FACTOR=1.0 alacritty` every
time the user wants to start alacritty.
It would be possible to allow specifying any DPR, however I've decided
against this since I'd assume it's a very rare usecase. It's also still
possible to make use of `WINIT_HIDPI_FACTOR` to do this on X11.
Currently this is not updated at runtime using the live config update,
there is not really much of a technical limitation why this woudn't be
possible, however a solution for that issue should be first added in
jwilm/alacritty#1346, once a system is established for changing DPI at
runtime, porting that functionality to this PR should be simple.
* Add working --class and --title CLI parameters
* Reduce Increase-/DecreaseFontSize step to 0.5
Until now the Increase-/DecreaseFontSize keybinds hand a step size of 1.0. Since the font size however is multiplied by two to allow more granular font size control, this lead to the bindings skipping one font size (incrementing/decrementing by +-2).
To fix this the step size of the Increase-/DecreaseFontSize bindings has been reduced to the minimum step size that exists with the current font configuration (0.5). This should allow users to increment and decrement the font size by a single point instead of two.
This also adds a few tests to make sure the methods for increasing/decreasing/resetting font size work properly.
* Add Copy/Cut/Paste keys
This just adds support for the Copy/Cut/Paste keys and sets up
Copy/Paste as alternative defaults for Ctrl+Shift+C/V.
* Move to cargo clippy
Using clippy as a library has been deprecated, instead the `cargo
clippy` command should be used instead. To comply with this change
clippy has been removed from the `Cargo.toml` and is now installed with
cargo when building in CI.
This has also lead to a few new clippy issues to show up, this includes
everything in the `font` subdirectory. This has been fixed and `font`
should now be covered by clippy CI too.
This also upgrades all dependencies, as a result this fixes #1341 and
this fixes #1344.
* Override dynamic_title when --title is specified
* Change green implementation to use the macro
* Ignore mouse input if window is unfocused
* Make compilation of binary a phony target
* Add opensuse zypper install method to readme
* Fix clippy issues
* Update manpage to document all CLI options
The introduction of `--class` has added a flag to the CLI without adding
it to the manpage. This has been fixed by updating the manpage.
This also adds the default values of `--class` and `--title` to the CLI
options.
* Remove unnecessary clippy lint annotations
We moved to "cargo clippy" in 5ba34d4f9766a55a06ed5e3e44cc384af1b09f65 and
removing the clippy lint annotations in `src/lib.rs` does not cause any additional warnings.
This also changes `cargo clippy` to use the flags required for checking integration tests.
* Enable clippy in font/copypasta crates
Enabled clippy in the sub-crates font and copypasta. All issues
that were discovered by this change have also been fixed.
* Remove outdated comment about NixOS
* Replace debug asserts with static_assertions
To check that transmutes will work correctly without having to rely on
error-prone runtime checking, the `static_assertions` crate has been
introduced. This allows comparing the size of types at compile time,
preventing potentially silent breakage.
This fixes #1417.
* Add `cargo deb` build instructions
Updated the `Cargo.toml` file and added a `package.metadata.deb`
subsection to define how to build a debian "deb" install file using
`cargo deb`. This will allow debian/ubuntu users to install `alacritty`
using their system's package manager. It also will make it easier to
provide pre-built binaries for those systems.
Also fixed a stray debug line in the bash autocomplete script that was
writting to a tempfile.
* Add config for unfocused window cursor change
* Add support for cursor shape escape sequence
* Add bright foreground color option
It was requested in jwilm/alacritty#825 that it should be possible to
add an optional bright foreground color.
This is now added to the primary colors structure and allows the user to
set a foreground color for bold normal text. This has no effect unless
the draw_bold_text_with_bright_colors option is also enabled.
If the color is not specified, the bright foreground color will fall
back to the normal foreground color.
This fixes #825.
* Fix clone URL in deb install instructions
* Fix 'cargo-deb' desktop file name
* Remove redundant dependency from deb build
* Switch from deprecated `std::env::home_dir` to `dirs::home_dir`
* Allow specifying modifiers for mouse bindings
* Send newline with NumpadEnter
* Add support for LCD-V pixel mode
* Add binding action for hiding the window
* Switch to rustup clippy component
* Add optional dim foreground color
Add optional color for the dim foreground (`\e[2m;`)
Defaults to 2/3 of the foreground color. (same as other colors).
If a bright color is dimmed, it's displayed as the normal color. The
exception for this is when the bright foreground is dimmed when no
bright foreground color is set. In that case it's treated as a normal
foreground color and dimmed to DimForeground.
To minimize the surprise for the user, the bright and dim colors have
been completely removed from the default configuration file.
Some documentation has also been added to make it clear to users what
these options can be used for.
This fixes #1448.
* Fix clippy lints and run font tests on travis
This fixes some existing clippy issues and runs the `font` tests through travis.
Testing of copypasta crate was omitted due to problens when running on headless travis-ci environment (x11 clipboard would fail).
* Ignore errors when logger can't write to output
The (e)print macro will panic when there is no output available to
write to, however in our scenario where we only log user errors to
stderr, the better choice would be to ignore when writing to stdout or
stderr is not possible.
This changes the (e)print macro to make use of `write` and ignore
any potential errors.
Since (e)println rely on (e)print, this also solves potential failuers
when calling (e)println.
With this change implemented, all of logging, (e)println and (e)print
should never fail even if the stdout/stderr is not available.
|
|
There were some unneeded codeblocks and TODO/XXX comments in the code
that have been removed. All issues marked with TODO/XXX have either been
already resolved or tracking issues exist.
|
|
Note that `WM_CLASS` is now set to `"alacritty", "Alacritty"`
instead of the previous value of `"Alacritty", "Alacritty"`. This
seems to be more standard.
This also contains some revised recommendations for installing the
`.desktop` file.
|
|
|
|
This commits adds modifiers to the mouse events.
It's an attempt at merging https://github.com/jwilm/alacritty/pull/1141
into this branch/PR.
|
|
Unwrapping inside the config file parsing can lead to some issues that
prevent us from falling back to a default configuration file.
One instance of that issue was mentioned in #1135.
Now all instances of `unwrap()` have been removed and replaced with
proper error handling. This will make the config more robust and
prevents live reload from silently breaking while alacritty is running.
This also fixes a few currently existing clippy issues.
Clippy added an additonal lint which complains about `MyStruct { field:
field }`.
These issues have been fixed, except for some false-positives and issues
in external macros which will probably be fixed with future updates (rust-lang-nursery/bitflags#149)
|
|
|
|
Upgrading glutin to the latest version allows building alacritty even
with old XRandr versions.
This is relevant for Debian machines (and other ancient systems).
|
|
This cleans up a bunch of code.
|
|
Updated the lockfile to make sure clippy is building properly with the
latest nightly toolchain.
|
|
Updated the version of some dependencies.
This also changes to a new clippy version so clippy can work with the latest nightly compiler again. Some issues created by new lints have been fixed.
|
|
The lockfile has been updated to make clippy work with nightly again.
|
|
Clippy failed to build with the latest nightly, so the lockfile has been
updated to allow the nightly builds to work again.
|
|
When an application takes control over the mouse, it usually disables
selection completely. However the common way to still make selection
possible is by allowing selection while the shift key is held down.
This feature is implemented here by making use of the new `modifiers`
field on mouse events with glutin/winit.
This fixes jwilm/alacritty#146.
|
|
This allows e.g. tmux to set the clipboard via the OSC 52 escape code.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Also fixes warning from gl generator
|
|
This became a support burden for me due to various compile and run time
issues.
|
|
|
|
|
|
|
|
Useful when requesting more info to help investigating issues.
|
|
Fixes naming collision issue on Fedora 26.
|
|
When RUST_LOG environment variable is set, uses env_logger instead of
our custom logger. This is desirable for debugging purposes.
|